检查阀用英语怎么说，检查阀的英文翻译

词语导航

基本信息

词语：检查阀

繁体：檢查閥

拼音：jiǎn chá fá

英语翻译

【化】 test valvewWw.WenTIYi.CoM

分词翻译

检查的英语翻译：

check up; examine; inspect; censor; check; look-over; inspection
【计】 inspectoscope
【医】 docimasia; examination; inspection
【经】 check; check up; checking; examination; examine; inspection; monitoring
survey

阀的英语翻译：

clique; valve
【化】 valve
【医】 limen; limina; valve

翻译例句

1. 检查阀是否安装正确；进料阀是否泄漏。

Check that the valve is installed properly and the feed valve does not leak.

2. 检查阀瓣橡胶，如果需要，则进行清洗或更换。

Inspect the disc rubber and clean or replace if required.

3. 不需要从管线上拆卸阀门，即可拆卸、维修或检查阀内件。

Internal parts can be removed, repaired or inspected without removing the valve from the piping.

4. 检查阀(单向阀)是一个手动阀门，这样水只能往一个方向走。

A check valve is a mechanical valve that only permits water flow in one direction.

5. 若电磁脉冲阀全部不吸，应检查阀用公共线端子外的接线是否正确可靠。

If electromagnetic pulse valve is not always magnetized, it must be checked if the connection outside of the terminal of common lead of the valve is correct and reliable.

6. 管路上的各种阀门在安装前要拆开清洗，检查阀柄是否灵活，并经试压不漏后方可安装。

Take apart all valves along the pipeline for washing before installation, check whether valve handles are flexible. The valves can be installed after passing the pressure test.

7. 检查阀瓣橡胶，如果需要，则进行清洗或更换。通过逆时针方向旋转白色垫圈螺纹就可以拆卸阀瓣。

Inspect the disc rubber and clean or replace if required. The disc can be removed by screwing the white washer counterclockwise.

8. 检查逆止阀的弹簧。

Check the check valve spring.

9. 时间：当烫印时间到达而发热板未升起，则须检查电磁阀触点是否烧坏或时间表是否烧坏。

Time: When the transfer time to reach the hot plate does not rise, shall check whether the contact valve is burned burned or timetable.

10. 所有的流体系统将用空气进行操作运行，以对管路系统中的所有泄露情况进行检查，液压缸和阀同样也要进行手动操作。

All fluid systems should be operated and air removed from systems and checked all leaks in piping systems. Cylinders and valves also should be operated manually.

11. 清洗：检查或更换磨损的阀瓣，断开控制管道的连接，采用钝工具和锤子敲击阀帽上的接片，然后旋松阀帽螺纹。

To Clean: Inspect or replace worn valve disc, disconnect control pipe and unscrew bonnet from valve body using blunt tool and hammer on bonnet lugs.

12. 如输入气压已达要求，应检查空气过滤减压阀的调节是否正确，表压显示能否满足切割要求。

If the input pressure has reached requirements, should check air filter relief-pressure valve regulation is correct, table press show you could meet the cutting requirements.

13. 经常检查所有的安全阀的安全可靠性。

Regular inspection of all the safety and reliability of the safety valve.

14. 检查空压阀是否打开。

Check that the air pressure valve is opened.

15. 清洁，调节安全阀，检查是否有磨损和肮脏的阀门。

Clean, adjust relief valve -, check for worn and dirty valve.

16. 若某一电磁脉冲阀常吸，应检查对应的电子开关管是否漏电、击穿。

If a electromagnetic pulse valve is always magnetized, it must be checked if the corresponding electronic switch tube is in electric leakage or broken-down.

17. 为了避免发动机过早的磨损(非正常)和保持最佳的工作状态，对空气滤清器和压力调节阀pcv进行定期的检查和更换便显得至关重要了。

In order to avoid premature wear engine (abnormal) and maintain the best working condition, the air filter and pressure regulator PCV regular inspection and replacement is crucial.

18. 所有水系统安全阀和控制阀都需要也必须进行年度检查。定期检查、检测和清洗能够确保使用寿命最长和产品性能正常。

Annual inspection of all water system safety and control valves is required and necessary. Regular inspection, testing and cleaning assures maximum life and proper product function.

19. 检查和修理漏水的浴缸转向器阀。

Check and repair leaks in the tub diverter valve.

20. 要求而且有必要每年一次检查所有安全阀和控制阀。定期检查、测试和清洗能够保证最长的使用寿命和正常的产品功能。

Annual inspection of all safety and control valves is required and necessary. Regular inspection, testing and cleaning assures maximum life and proper product function.

21. 启动舱底水供给泵，检查补水电磁阀和流量开关是否工作。

Start the bilge water feed pump, check the feed water solenoid valve and flow switch.

22. 检查单向阀是否安装正确。

Check that the one-way valve is correctly installed.

23. 检查自动给水系统的止回阀，截止阀等各阀是否正确开启或关闭。

Examine the check valve, cut off valve of auto water supplying system see if open or close correct.

24. 检查各换向阀电磁铁动作是否灵活。

Check to know the electromagnet reaction of the reversing valve.

25. 检查两个管的末端，排气歧管和EGR阀是否有泄露或表面有裂痕。

Check for signs of leakage or cracked surfaces at both ends of tube, exhaust manifold and EGR valve.

26. 还应检查点火连线及其接头，调整空载速度，更换压力调节阀。注意上述维修工作将提高发动机性能并节省燃料。

He should also check ignition wires and connections, adjust idle speed and replace PCV valve. Attention to these service functions will improve engine performance and fuel economy.

27. 请你检查应急停机电磁阀。

Please check the electric-magnetic valve for emergency shut-down function.

28. 还应检查点火连线及其接头，调整空载速度，更换压力调节阀。

He should also check ignition wires and connections, adjust idle speed and replace PCV valve.

29. 在维修调节阀之前，还要考虑和检查其他可能的后果。

Other possible causes should also be examined prior to servicing the regulator.

30. 在维修调节阀之前，还要考虑和检查其他可能的后果。

Other possible causes should also be examined prior to servicing the regulator.