合金接头用英语怎么说,合金接头的英文翻译


词语导航

基本信息

词语:合金接头

繁体:合金接頭

拼音:hé jīn jiē tóu

英语翻译

【电】 alloy-junction; alloy-junction photcell

分词翻译

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

接头的英语翻译:

connect; get in touch with; joint; piece
【计】 splice
【化】 adapter

翻译例句

1. 研究了二氧化碳激光焊接工艺条件对锆-4合金接头质量的影响。

The paper introduce the influence of co 2 laser welding process condition on welding joint quality of Zr 4 alloy.

2. 因焊丝合金化学成分和结晶过程的影响,焊缝处是合金接头的薄弱环节。

The weld zone is the weakest in welded joint due to effects of chemical components of filler and crystallization process.

3. 研究表明,对铝锂合金接头进行分级固溶时效处理、可以有效提高强度,改善塑性。wWW.WenTiyi.COm

The result shows that this method can increase not only thetensile strength but also the ductility of the alloy 2091 welded joint.

4. 研究结果表明:低温对LF 6合金及其焊接接头的拉伸性能具有显著影响。

The results show that the tensile properties of LF6 alloy and its welded joint are greatly affected by low temperature.

5. 使用AISI 4145 H合金钢制造。方钻杆的末端和驱动截面和接头都符合API规范。

Kellies are made of AISI4145H alloy steel. The ends, driving sections and joints are produced and tested according to API specification.

6. 纯钛与钻铬或者镍铬合金激光熔接接头脆性大,断面可见严重的裂纹和气孔。

The laser-welded joints for dissimilar metal of pure titanium and Co-Cr, pure titanium and Ni-Cr, showed more brittle characteristics and severe defects.

7. 通过在药皮中添加稀土合金的试验,研究了稀土对高钒焊条焊补铸铁接头组织与硬度的影响。

The influence of RE on the microstructure and hardness of welded joint was studied by the experiments adding RE in electrode covering.

8. 为适应大型工程机械焊接用钢需要,对低合金高强度钢HG80及其焊接接头的疲劳裂纹扩展速率进行了研究。

To meet the development of steels used for the large engineering machinery, fatigue crack growth rates of a high strength low alloy steel HG80 and welded joint were investigated.

9. LC4铝合金在航空航天等工业中得到了广泛应用,在航空工业中主要用于飞机大梁、隔框、接头等重要承力件。

LC4 alloy have been used on aerospace industry and others widely, and it is used on main load-carrying structure of airplane, for example girder and bulkhead and junction etc.

10. 对不同焊接热输入下的6063铝合金焊接接头进行人工时效,分析其硬度分布和强度的变化。

Effects of artificial ageing on the hardness distributions and strength were analyzed for 6063 aluminum alloy joints welded by varying heat inputs.

11. 扰流板通过铝合金连接接头铰接到后梁和假梁上。

They are connected by aluminum-alloy attachment fittings and hinged to the rear spar and rear false spar.

12. 由于镁合金不填丝的TIG焊接接头强度低,焊缝表面成型不好,所以,镁合金的填丝tig焊接方法不可避免。

Because TIG welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.

13. 微型剪切试验为铝合金焊接接头力学性能的评定提供了一个新途径。

The micro shear test could give a new way to evaluate the mechanical properties in weld joint of aluminium alloy.

14. 针对7075铝合金中厚板真空电子束焊接过程,采用非线性有限元法,对焊接接头的残余应力分布进行了数值模拟。

Aim at 7075 aluminium alloy vacuum electronic beam welding, using nonlinear finite element, the numerical simulation of the residual stresses distribution in welding joint was made.

15. 采用云纹分析的试验力学方法,研究了不同情况下LY 12 CZ高强铝合金焊接接头应变场的分布特点。

Using experimental mechanical method of moire analysis, strain field distributions of LY12CZ aluminum alloy welded joints under different conditions were investigated.

16. 运用弹塑性有限元法,研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。

The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).

17. 用热等静压扩散连接法获得了硬质合金与球墨铸铁的直接连接接头和以镍箔为中间夹层的间接连接接头。

The direct bonding joint between cemented carbide and nodular cast iron and the indirect bonding joint by using nickel foil as intermediate layer were obtained by HIP diffusion bonding process.

18. 采用国产6005A铝合金进行焊接试验,并对焊接接头进行了力学性能检测及金相显微组织观察。

Welding test of extruded 6005a Aluminium alloy was performed and mechanical properties and optical Ancrostructures were studied.

19. 通过金相技术、力学性能试验和SEM技术研究了6061-T6铝合金真空电子束焊接接头的金相组织、力学性能和断口形貌特征。

The metallurgical structures, mechanical properties and fractographs of EB welded 6061-T6 aluminum alloy joint were studied by means of metallography, mechanical test and SEM technology.

20. 本本研究了低温同步加热(LTSH)对高强铝合金ly 12 CZ焊接接头机械性能的影响。

In this paper, the influence of low temperature synchro heating (LTSH) on the mechanical properties of aluminum alloy LY12CZ welding joints was investigated.

21. 结果表明,钛合金活性焊剂对焊接接头的宏观组织形貌有明显影响,但对焊接接头的化学组成没有影响。

The results showed that the activating flux has a visible influence on the crystal structure of welds, but has no relationship with the composition of the welds.

22. 针对涡轮盘材料GH4133合金,在电子束焊后采用新颖的电子束局部热处理工艺对接头进行热处理。

After electron beam welding, electron beam local heat treatment was applied in GH4133 superalloy as the turbine disk material in this paper.

23. 疲劳试验结果表明喷涂合金粉末类型对喷涂后接头疲劳性能影响较大。

Test results show that type of metal powder spray has great influence on the improvement of fatigue properties by plasma spray.

24. 本文介绍了俄罗斯焊接学者关于影响铝合金焊接接头性能的若干因素的研究点滴。

Some researches of influential several factors of welding join properties of aluminum alloy by Russia scholar was introduced.

25. 本文介绍了俄罗斯焊接学者关于影响铝合金焊接接头性能的若干因素的研究点滴。

Some researches of influential several factors of welding join properties of aluminum alloy by Russia scholar was introduced.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!