电弧柱用英语怎么说,电弧柱的英文翻译


词语导航

基本信息

词语:电弧柱

繁体:電弧柱

拼音:diàn hú zhù

英语翻译

【机】 arc column

分词翻译

电的英语翻译:

electricity
【计】 telewriting
【化】 electricity
【医】 Elec.; electricity; electro-; galvano-wWW.weNtIyI.cOm

弧柱的英语翻译:

【化】 arc column

翻译例句

1. 结果表明:电弧弧柱的高温效应剧烈排斥冷气流的混入,使CVD过程受到抑制。

The results indicate that high temperature effect of arc column strongly prevents cold gas current from getting in, so as to restrain CVD process.

2. 属于拉弧式电弧螺柱焊焊枪,焊接质量好,重量轻,操作方便。

Draw arc stud welding gun makes high welding quality, with light weight and convenient operation.

3. 通过大量的雷电冲击放电试验、工频电弧试验和弯曲负荷试验等试验研究,研制出了一种放电箝位柱式复合绝缘子和配套的绝缘罩。

By means of lots of lightning impulse tests, power frequency arc tests as well as bend loading tests, a kind of clamping post composite insulators with matching insulation hoods is developed.

4. 讨论了具有抛物线形电流分布的电弧等离子体柱在磁场中的不稳定性问题。

The helical instability problem of an arc plasma column with a parabolic current profile in a magnetic field is discussed.

5. 结合具体产品,对电弧螺柱焊机电路的组成和功能进行了分析,提供了常见故障原因及排除方法。

This article analyzes the structure and function of arc stud welders and the common problems and gives the ways to work out these problems.

6. 在电弧稳定燃烧的过程中,液体被电弧的高温所加热,在弧柱周围形成气泡,为电弧提供了一个气体氛围的放电环境。

During the steady arc discharge course, liquid is heated up by the hot arc plasma, so a gas bubble is formed around the arc column and affords a gaseous environment for arc discharge.

7. 试验结果表明,该控制器能在控制实现电弧螺柱焊过程的基础上,通过采集焊接参数客观反映焊接过程的变化。

From the test results, it is indicated that the controller can not only realize arc stud welding procedure, but also describe the welding process by date acquisition of welding parameter.

8. 介绍了三相五柱式消弧线圈的工作原理,单相电弧接地过电压的工频熄弧理论。

The principle of arc-suppression coil with three phases and five columns , and theory of power frequency extinguishing arcing were introduced.

9. 在电极间隙增大时电弧放电柱放大而激发温度升高。

The results show that the relations between the excitation temperature and arc dischargable post under different current and different electrode gap.

10. 作为一种广泛应用的螺柱焊接方法,电弧螺柱焊技术具有焊接效率高,易于实现自动化控制等优点。

As a widely used welding method, arc stud welding technology has some superiority in higher welding efficiency and in easier to achieve automatic control etc.

11. 螺柱送进速度是电弧螺柱焊中的一个重要参数。

Stud plunge speed is one of the important parameters in arc stud welding.

12. 基于步进式电弧螺柱焊方法,以焊接过程中螺柱与工件之间挤压力为控制量,实现对螺柱送进深度的控制。

In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.

13. 在分析电弧对气流影响时,必须同时考虑到弧柱对喉道的障碍作用和电弧对气流的加热效应。

In analyzing the arc effects on gas flow, both the clogging of arc column to the gas and the heat disspated must be considered simultaneous…

14. 同时发现涂层焊丝电弧弧柱的径向宽度更宽。

In addition, the width of arc column of uncoated solid wire is much wider.

15. 本发明公开了一种电弧螺柱焊波形检测装置及其质量评价方法。

The invention discloses an electric arc stud welding waveform testing device and a quality evaluating method thereof.

16. 利用自行研制的步进式电弧螺柱焊枪,采用套圈作为焊接过程的保护方式,研究了套圈保护步进式电弧螺柱焊过程。

Based on self-made stepping arc stud welding gun, the welding process adopting ferrules as arc shield was studied.

17. 并据此利用渐近分析方法分析了真空电弧中弧柱的磁收缩物理过程和电流密度分布,最后分析了电极参数对电弧收缩的影响。

Then the physical process of current constriction and the influence of electrode dimensions on it are analysed. This analysis can be used to explain the effect of axial magnetic fields t…

18. 并据此利用渐近分析方法分析了真空电弧中弧柱的磁收缩物理过程和电流密度分布,最后分析了电极参数对电弧收缩的影响。

Then the physical process of current constriction and the influence of electrode dimensions on it are analysed. This analysis can be used to explain the effect of axial magnetic fields t…

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!