混合螺杆用英语怎么说,混合螺杆的英文翻译


词语导航

基本信息

词语:混合螺杆

繁体:混合螺桿

拼音:hùn hé luó gān

英语翻译

【化】 mixing screw

分词翻译

混合的英语翻译:

mix; admix; blend; compound; incorporate; interfusion; meld
【计】 mixing
【化】 admixture; mixing
【医】 admixture; incorporate; incorporation; M. et sig.; misce; mix; mixing
permixion

螺杆的英语翻译:

screw
【机】 screw

翻译例句

1. 和隔膜泵相比,单螺杆泵可输送各种混合杂质,含有气体及固体颗粒或纤维的介质,也可输送各种腐蚀性物质。

And diaphragm compared to single-screw pump can transport all kinds of mixed impurity containing gas and solid particles or fibers of the media, but also transport all kinds of corrosive substances.

2. 螺杆带阻隔器,塑化性能高。额外的混合区,计量和塑化更优化。优化选材,使用寿命长。

High plasticizing performance with barrier screw. Melting performance and homogeneity optimized by additional compounding section. Long service life thanks to optimal choice of materials.

3. 螺杆和机筒罕有引起降解的,尽管排气口或复杂的混合段或复杂的屏障段的确会引起降解。

The screw and barrel rarely cause degradation, though vents or complex mixing or barrier sections may do so.

4. 为改善单螺杆挤出机的分散和分布混合能力,国内外塑料工程师们多年来进行了不断的努力。

The plastics engineers were in a constant effort to improve the distributive and dispersive mixing performance of the single screw extruder for many years.

5. 实现了在较小的螺杆长径比的条件下达到双螺杆挤出机在较大的长径比条件下,才能达到的混炼混合作用。

The machines under lesser screw length-diameter ratio possess the blending capacity of double screw extrusion under bigger length-diameter ratio.

6. 对混炼型锥形双螺杆的挤出产量、物料压力、物料流动状态及混合效果进行了大量实验研究。

Extrusion rate, melt pressure, flow profile and mixing effects of the conical twin screw with mixing elements were observed experimentally.

7. 结果表明,螺杆反应器的啮合区具有较大的速度梯度,有利于物料的充分混合。

The results show that a large velocity gradient emerges in the intermeshing region of the screw reactors, which is helpful to mix materials sufficiently.

8. 研究了多孔超高燃速推进剂代料的双螺杆混合挤出工艺。

Twin screw extrusion technology of porous ultra high burning rate propellant (UHBRP) substitutes was studied.

9. 本文分析了单螺杆挤出机的分散和分布混合能力,得出了单螺杆挤出机的适用混合类型。

Single screw extruder was analyzed in dispersion and distribution mixing capacities, and determined in the types suitable for dispersion or distribution mixing.

10. 应用玉米粉与面粉组成的混合粉,对D S-32型小双螺杆挤压试验机的挤压性能进行了研究。

The extrusion performance of DS-32 twin-extruder is studied by using the mixture of maize and wheat powder.wWW.WentiYi.coM

11. 适用于螺杆挤压颗粒、摇摆颗粒、高速混合制粒颗粒。

Applicable to screw extrusion particles, rock particles, high-speed mixed granulation particles.

12. 纺织和地毯用有色化学纤维的生产,一般都涉及两种或多种组分加入一台单螺杆挤出机,在挤出机中使组分混合并挤出成丝。

Typically the production of man-made colored textile and carpet fibers involves the feeding of two or more components into a single screw extruder, where they are blended and extruded as a filament.

13. 利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。

Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.

14. 本文的工作为研究各种新型螺杆元件的输送和混合机理提供了一种新的方法。

Our research work has provided a new method for the study of the conveying and mixing mechanisms of various new types of screw elements.

15. 利用A NSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。

Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.

16. 本文介绍了对它们的流场分析及双螺杆挤出机的混合机理。

This paper introduces the analysis on their flow field and the mixing mechanism of the CRTSE.

17. 与双螺杆反应器相比,三螺杆反应器具有较强的物料输送能力、塑化和混合能力;

By comparison, the TATSR has higher efficiency of pumping. plasticization and mixing than that of twin screw reactor.

18. 在三螺杆挤出机的挤出工艺中,混合元件的合理组合对三螺杆挤出机的挤出性能有着重要影响。

During the process of extrusion by tri-screw extruder, the combination of mixing components in tri-screw extruder has an important impact on extrusion properties.

19. 螺纹块和捏合盘是同向双螺杆挤出机的主要混合功能元件。

The screw block and kneading disc are two main functional mixing elements of the co-rotating twin-screw extruder(CRTSE).

20. 本文探讨了以汽水混合物为工质的螺杆膨胀机的定熵膨胀功率特性,提出了峰值功率膨胀比的概念。

The power characteristics of a helical screw expander during its isentropic expansion was studied in detail with the concept of expansion ratio of peak power being proposed.

21. 从理论上验证了多螺杆反应器在物料输运能力以及物料混合能力等方面均具有较佳的能力,多螺杆反应器更适合聚合物的加工。

It is verified in theory that the multiple-screw extruders have good material transportation and mixed ability. Multiple-screw extruder is fitter for polymer processing.

22. 研究了不同螺杆构型的混合性能以及低密度聚乙烯熔融接枝马来酸酐的过程,探讨了不同螺杆构型的混合性能与接枝反应接枝率的关系。

The mixing performance of different screw configurations of a co-rotating twin screw extruder and the grafting reactive extrusion of PE-LDg-MAH were investigated.

23. 反向啮合块的分布混合能力优于中性啮合块,受体积流率影响不大,随螺杆转速提高而增强。

The mixing capability of reverse kneading block were better than neutral kneading block, it impacted slightly by the volumetric flow rate, and improved with the increase in screw speed.

24. 是实验室理想的干燥设备,颗粒状物料来源:旋转制粒、螺杆挤压制粒、湿法混合制粒、包衣制粒等。

It is an optimal device for laboratory drying. Granular material: rotating granulation, screw extrusion granulation, wet mixing granulation, coating granulation, etc.

25. 该方法是将配方中各组分分散混合后,通过双螺杆机熔融、混炼、挤出、冷却、干燥、切粒和包装。

In the formula of the method, all components are dispersed to be mixed and are subject to melting by a double screw extruder, mixing, extrusion, cooling, drying, granulating and packaging.

26. 通过聚苯硫醚(PPS)与大颗粒氧化镁(40~325目) 混合经双螺杆挤出机挤出造粒制备了导热绝缘塑料。

Thermal conductive insulating PPS plastics were made by extrusion compounding PPS with MgO particles of large particle sizeBF(40~325-mesh)BFQ.

27. 通过聚苯硫醚(PPS)与大颗粒氧化镁(40~325目) 混合经双螺杆挤出机挤出造粒制备了导热绝缘塑料。

Thermal conductive insulating PPS plastics were made by extrusion compounding PPS with MgO particles of large particle sizeBF(40~325-mesh)BFQ.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!