
词语导航
基本信息
词语:切削能力
繁体:切削能力
拼音:qiē xiāo néng lì
英语翻译
【机】 cutting ability
分词翻译
切削的英语翻译:
cutting
能力的英语翻译:
ability; capacity; competence; capability; faculty
【化】 capability; capacity; potency
【医】 capacity; competence; faculty; potency; potentia
【经】 ability; competence; power
翻译例句
1. 工作台负荷较大,切削能力强。
Table load is great, and the cutting capability is also strong.
2. 呈绿色,晶体结构,硬度高,切削能力较强,化学性质稳定,导热性能好。
Green Silicon Carbide Micropowder is green and features high hardness and strong cutting force, steady chemical property, good capacity of heat-transmission.
3. 镜面绵盘是使用较软的泡绵所制造,颜色通常为黑色或蓝色,这类的绵盘不具有切削能力,但具有把车漆抛到异常光亮的能力。
Glazing pads are made from softer foams, and are usually either black or blue in colour. These pads have no cutting action, but are capable of burnishing paint to an exceptionally high lustre.
4. 热硬度,即材料由于存在于切削区的高温而升温时仍能保持其硬度的能力。
Hot hardness, which is the ability of the material to retain its hardness at elevated temperatures in view of the high temperatures existing in the cutting zone.
5. 而碳化钛的高研磨能力是由颗粒的强切削力所致,人造金刚石则由颗粒的高硬度所致。
The high abrasive ability of the titanium carbide was caused by the cutting power of the particles, while that of artificial diamond resulted from a high hardness of the particles.
6. 他们是否适合高速,坚固的设计和高承载能力提高切削性能和优良的准确性和最低维修要求系统的可用性。
Their suitability for high speeds, robust design and high load carrying capacity increase cutting performance and system availability with excellent accuracy and minimum maintenance requirements.
7. 与传统切削加工方法相比具有生产效率高、加工精度高、承载能力强等优点。
Compared with traditional cutting processing method, it has many advantages such as high production efficiency, high process precision, and high bearing capacity.
8. 该仪器具有显示温度波形曲线、热电偶标定、确定切削温度指数公式、判定切削状态的能力。
It is capable of displaying temperature flexuous curve, calibrating thermocouple, establishing the cutting temperature exponential formulation and predicating the state of cutting.
9. 通过切削试验说明:这种系统有助于充分发挥机床的加工能力,提高机床功率利用率和节约能源。
Cutting test have been made and show clearly that this system will contribute to develop the cutting ability of machine tools and to increase utilizing rate of machine tools and to save energy.
10. 用两层棉布加上一层麻布车缝而成,同时具备切削及一定程度的抛光能力,主要用在预备抛光的金属制品上。
One Layer of bias sisal sewed with two layers of cotton cloth, provides it good cutting and polishing properties, mainly used for pre-polishing of metal ware.
11. 介稳奥氏体锰钢具有高耐磨性的原因是其在磨损过程中磨面诱发产生大量的马氏体提高了其抗磨粒的切削和剥离能力。WWW.wENtIYi.Com
The high wear resistance of the metastable austenitic Mn-steels lies in the high work hardening caused by induced martensite transformation.
12. 试验结果表明,脆性材料的延性切削模式的实现是由于云母晶体对裂纹走向的引导和玻璃相的强烈的剪切变形能力的共同作用。
The test results show that the mechanism of ductile-mode material removal of the brittle material is attributed to a combination of.
13. 切削刃口可在加工过程中自行尖锐,以提供稳定而持续的研磨能力。
The self-sharpening action of the cutting edge on the Fine Alumina Fiber Rod tips provides superior grinding performance. Continuous cutting edges provide stable and continuous grinding performance.
14. 新推出的精度喷嘴,保证了冷却液的精确传送,即使在冷却液压力只有10巴时也可显著改善断屑能力和切削性能。
With this introduction of sighted nozzles, accurate coolant delivery is ensured, significantly improving chip breaking and performance from as little as 10 bar.
15. 通过控制基于连续的切削片的卷曲情况:把切削片处理成直而平的翅状切削片,来提高切削片的热传递能力。
Through controlling chip curl based on the continuous strip chips, the flat straight fins were processed to improve the fins" heat transfer capability.
16. 通过控制基于连续的切削片的卷曲情况:把切削片处理成直而平的翅状切削片,来提高切削片的热传递能力。
Through controlling chip curl based on the continuous strip chips, the flat straight fins were processed to improve the fins" heat transfer capability.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
