热套用英语怎么说,热套的英文翻译


词语导航

基本信息

词语:热套

繁体:熱套

拼音:rè tào

英语翻译

【化】 shrinkage fit

分词翻译

热的英语翻译:

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

套的英语翻译:

convention; copy; cover; formula; harness; knot; series; set; sheath; sleeve
suit
【化】 covering; set
【医】 set

翻译例句

1. 电机的转子与氧化锆陶瓷转轴热套。

The rotor of the motor is thermally sleeved with a zirconia ceramic rotating shaft.

2. 本文导出了热套段模型的传递矩阵表达式。

The transfer matrix across the shrink fit section is established.

3. 本文简要介绍了高温应变测量原理和技术在大型汽轮发电机转子护环热套应力测试中的成功应用。

The technique and its principle of high temperature strain measurement are introduced to determine heat sleeve stress about rotor retaining ring of large turbogenerator.

4. 系统采用日本OMRON公司C40P型可编程序控制器实现黑白显像管热套式防爆机的电气控制。

By adopting the C40P program controller from Japanese OMRON Co, this system can carry out electric control in the hot-banding machine for B/W CRT.

5. 针对方形翅片管加工特点,确定了翅片翻边的相关工艺尺寸,提出了套片式翅片管的热套工艺方案。

The relative sizes of the turn down rims of the fins were determined for the processing characteristics of square finned tubes, the shrink fit technology program of the casing fin tubes was proposed.

6. 目前在法国,有超过2万套的公寓是由温暖的地下水供暖的,这些地下水来自一个叫做巴黎盆地的地质构造的热储,位于巴黎附近。

More than 20,000 apartments in France are now heated by warm underground water drawn from a heat reservoir in a geologic structure near Paris called the Paris Basin.

7. “蛇类拥有一套独特的感官系统,用来探测红外射线,使得它们可以生成捕食者或猎物的“热成像图片”。”研究报道开宗明义。

"Snakes possess a unique sensory system for detecting infrared radiation, enabling them to generate a "thermal image" of predators or prey," begins the study.

8. 为探讨高炉长寿问题,建立了一套高炉寿命评价系统模型,以确定影响高炉长寿的各种因素及冷却器热面极限温度值。

A system model for evaluation of BF life is created so as to determine each factor influencing the BF life and the temperature limit in hot surface of the cooler.

9. 介绍了一套COREX竖炉还原热模拟试验装置及试验结果。

A hot simulation equipment of COREX shaft and its experimental results are introduced.

10. 这套设备包括一个巨型的热处理炉,一架可以起吊热的金属板而不至于损坏它们的吊车和一套能控制整个工艺流程的计算机系统。

It includes a huge heat-treatment furnace, a crane that lifts hot metal plates without damaging them, and a computer system that can manage the complete flow of work.

11. 中国宴席上典型的菜单包括开席的一套凉菜及其后的热菜,例如肉类、鸡鸭、蔬菜等。

A typical Chinese banquet menu includes cold dishes served at the beginning, followed by hot dishes, such as meat, poultry, vegetables, etc.

12. 干燥机由一个封闭的腔,热夹套容器干燥,可作为。

The dryer consists of an enclosed, thermal-jacketed vessel that serves as the drying chamber.

13. 本文以激光扫描技术、红外技术及电子技术为基础,研究并设计了一套激光扫描自动热激励红外无损检测系统。

Considering laser scanning technique, infrared method and electronic technology, studied and designed a set of infrared NDT system with laser scanning automatic heat loading method in this paper.

14. 一套带热回收系统的机械通风装置将温室中的热空气送至厨房和两间卧室供采暖之用。

A mechanical ventilation with heat recovery system which takes warm air from the conservatory serves the kitchen and the two bathrooms.WwW.WENTIYi.cOM

15. 根据铝带坯连续铸轧过程瞬态凝固、流变成形的特点,同时考虑影响辊套与铸坯传热界面的接触热导问题,建立了铝带坯连续铸轧过程热力耦合有限元分析模型。

According to the characteristics of transient solidification and rheological forming in continuous roll casting process, a set of thermal-mechanical coupling equations had been set up.

16. 对硫磺回收这类有自产蒸汽且蒸汽又难有别的利用途径的装置,采用蒸汽夹套伴热是合理的。

However, it is reasonable to adopt steam jacket heat tracing for sulfur recovery unit, as the steam produced by the unit itself has no other utilization.

17. 从经济及装置特点两方面对硫磺回收装置电伴热和蒸汽夹套伴热进行了比较。

Electric heat tracing and steam jacket heat tracing in sulfur recovery unit have been compared in the light of economy and unit features.

18. 通过分析高强螺栓的成形工艺,对模具结构进行深入探讨,设计了一套热镦模。

Die structure was discussed through the analysis of forming process of high intension screw bolt and a set of hot upsetting tool was designed.

19. 文章在分析水夹套式氯化氢合成炉腐蚀机理基础上提出防腐壁温约束条件的合成炉换热面积设计方法。

This paper provides synthesizer"s heat exchanger area design method of additive mothballing wall temperature bondage condition in analysed corrosion mechanism of hydrogen chloride synthesizer.

20. 加工薄壁套类零件时,由于受切削热、机床精度、刀具角度等诸因素影响,零件极易变形。

Affected by cutting heat, machine tool precision, cutting tool angles and so on, thin-wall case deform easily.

21. 介绍了聚氯乙烯与丁苯热塑弹性体共混改性生产波纹套线管的工艺过程。

That introduced the technological process and characteristic of the PVC/SBS general character producing corrugated casing - line pipe.

22. 通过设置热回收水系统,对发动机的缸套冷却水热量和排气热量进行了回收,这两部分热量是系统热泵运行的重要组成部分。

In the experiment, a secondary water recovery system is set to reclaim waste heat from engine jacket coolant and exhaust, which is a very important part of GEHP.

23. 建立了一套用于实船热尾流测量的温度检测系统,它由温度传感器、电流变送器及差分放大器、数据采集器、垂直温度分布记录仪等组成。

This paper sets up the temperature measurement system which is used in measuring ship wakes, and is made up of temperature sensors, current converter, amplifier, data collector, bathythermograph.

24. 文章简要介绍了在采用双机热备份实时控制系统中,以数据选择芯片为主,为系统热备份的两套控制机器进行切换选择的切换电路设计方案。

The scheme of circuit switching of two control machines in real-time control system that adopted dual machine thermal back-up and give priority to data choice chip are introduced simply.

25. 介绍了热连轧机采用的质量保证指标的组成和评价方法,提出了一套较完整的质量保证指标。

In this paper, the product quality guarantees adopted in hot strip mill and evaluation methods are introduced. And a set of comprehensive product quality guarantees is brought forward.

26. 本文运用ANSYS分析软件,利用物理环境分析法建立了三层套组合式扁挤压筒内压-预紧-热载荷耦合有限元模型。

With the FEA software ANSYS, the coupling model of coupling the pressure-prestress-heat stress flat container of three-layer is built using the physical environment approach.

27. 开发设计了一套适应于连铸坯热送、热装生产的应用软件系统,提高了热装温度,促进了生产组织和管理。

Develop an application software adapt to hot sending and charging of CC billet, the hot installing temperature of billet is raised, the produced organizing and managing are promoted.

28. 针对铸轧工艺的特殊性,拟定了一套方便可行的铸轧辊温度场及热变形测试方案。

Based on the particularity of roll casting process, a practicable scheme is given for conveniently surveying the temperature field and thermal deformation of casting roller.

29. 介绍了一套自制的热导式高温量热系统,热量常数可用电标定法测定。

A set of conduction type high temperature calorimetric system for measurement of heat sink of endothermic fuels has been developed.

30. 介绍了一套自制的热导式高温量热系统,热量常数可用电标定法测定。

A set of conduction type high temperature calorimetric system for measurement of heat sink of endothermic fuels has been developed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!