弹簧力用英语怎么说,弹簧力的英文翻译


词语导航

基本信息

词语:弹簧力

繁体:彈簧力

拼音:dàn huáng lì

英语翻译

【医】 spring force

分词翻译

弹簧的英语翻译:

bedspring; spring
【医】 spring

力的英语翻译:

all one"s best; force; power; puissance; strength
【化】 force
【医】 dynamo-; ergo-; force; potency; potentia; Power; stheno-; strength; vis

翻译例句

1. 方程式中只有弹簧力是耦合项。

Only the spring forces are coupling terms of motion equations.

2. 弹簧力钳住和液压力量释放。

Spring force clamps and hydraulic force release it.

3. 弹簧力较小,可避免小铣刀或钻头断裂。

Low sprang force, May avoid the milling cutter or the drill bit break.

4. 弹簧力较小,可避免小铣刀或钻头断裂。

Low sprang force, May avoid the milling cutter the drill bit break.

5. 本文概述了目前计算气阀弹簧力中所存在的一些问题。

In this paper some of the problems encountered in the calculation of the valve spring force are discussed.

6. 气阀阻力损失大小与气流的阀隙速度及弹簧力大小有关。

Air valve size and airflow resistance losses of valves always speed and the size of the spring-loaded edge.

7. 由作用在密封上的弹簧力和液体压力使两密封面压紧在一起。

The seals faces are held together by springs and hydraulic forces on the seal.

8. 当P口无压缩空气时,在弹簧力和A 口(腔)余气力作用下;

When P, mouth without compressed air, in spring force and A mouth (chamber) under the action of more than strength;

9. 断电时,辅阀利用弹簧力或介质压力推动关闭件,向下移动便阀门关闭。

The high pressure around the valve off, fluid pressure to promote the closure of parts moving down, close the valve.

10. 一旦驾驶员松开离合器踏板,弹簧力就迅速作用在离合器上,摩擦力就随之增加。

As the driver lets loose the clutch pedal, spring pressure increase on the clutch parts. Friction between the parts also increases.

11. 所述快速调节部件Q在一个轴向行程 的方向上可手动操作并且通过弹簧力30自动返回。

The quick adjustment assembly Q is operable manually in one axial stroke direction and automatically returns by spring force 30.

12. 由于空腹轨道内空间小,驱动轮安装在空腹轨道外部,靠弹簧力产生的摩擦力带动小车运行。

Because the inner space of a hollow track is small, a driving wheel is arranged outside the hollow track in the prior art, and a dolly is driven to move by friction force generated by spring force.

13. 该文利用流体力学的原理,建立流体膜临界连续状态的液膜压力公式,在此基础上,探讨了弹簧力的设计方法。

This paper presents a formula of the pressure of liguid film in the critical state of the unbroken liguid on the principle of hydromechanics, and discusses a design method of spring force.www.wENTIyi.COm

14. 分析了弹簧力封闭凸轮机构的诸多不足,引入采用几何封闭的共轭凸轮机构的思想,并建立了相应的研究分析空间模型。

Corresponding to the demands, done such jobs:(1) Analyzed the limitation of spring-power obturation mechanism, applied the conjugate cam to renew the mechanism and created the interspatial model.

15. 定点力比较法消除了距离变化量对磁作用力和弹簧力的影响,只剩下温度变化对磁作用力的影响,从而使多变量系统转化为单变量系统设计。

A fixed point comparison method is proposed which can eliminate the influence of distance change on both the magnetic and spring forces, and what is left is...

16. 在15世纪早期,人们发明了螺旋弹簧或均力圆锥轮,尽管它的主弹簧的张力不断变化,但仍能对计时装置的齿轮保持恒定的力。

In the early 1400s came the invention of the coiled spring or fusee which maintained constant force to the gear wheels of the timekeeper despite the changing tension of its mainspring.

17. 此外,如果我选用了一张面积较大的汽泡纸,也就相当于有更多弹簧给重物施加了更大的力。

Also, if I have a larger bubble wrap sheet, there will be more "springs" next to each other to push up on the weights.

18. 这是回复力,就像弹簧上的那一样。

It"s a restoring force, just like with the spring.

19. 然后我松手,当我把力撤销,这个弹簧最后的长度,比它一开始要长。

And then when I relaxed, when I took my force off, the spring was longer at the ends than it was at the beginning.

20. 设计时要确保总摩擦力小于折回弹簧的弹力,这样当松开踏板时,弹簧才会弹回,油门才会闭合。

The amount of friction is designed to be some degree less than the return spring, so that when the pedal is released, it returns to the closed position.

21. 但摩擦力(滞后作用)可以保证更平稳地完成油门设定,并缓解在持续挤压弹簧过程中产生的张力。

But the friction (hysteresis) makes it easier to maintain a steady throttle setting, and relieves strain from pushing against the spring continuously.

22. 拿起一个弹簧,我们很熟悉了,松弛状态时,长度为,弹簧常数是,我可以用一些力,将其拉长。

When we take a spring, something that - we are so familiar with now, and the spring has length l l in a relaxed state, k spring constant k, I can extend the spring with some force that I apply.

23. 对自动调整臂的设计计算作了详尽的分析,主要以下几个方面:1矩形截面力和弹簧的设计计算。

There are mostly a few aspects that fully analyse for design and compute for AIRA:1 design and compute for spring of rectangle section .

24. 很多弹簧做过实验后,得出的事实-,它们叫做理想弹簧-,对很多弹簧来说,这个力,和移位x成比例。

Experimental fact - that many springs — - we call them ideal springs — for many springs, this force is proportional to the displacement, x.

25. ,拉这个弹簧“,那么这个力,想要将这个弹簧,拉回平衡的地方。

the spring, with a "p," then there is a force that wants to drive this spring back to equilibrium.

26. 可以通过引进配重和弹簧来改善手控操纵系统的操纵力特性。

The controlforce characteristics of manual-control system can be modified by the introduction of weights and springs.

27. 这些弹簧提供了与偏差成正比的恢复力。

These springs supply a reacting force proportional to the deflection.

28. 这些弹簧提供了与偏差成正比的恢复力。

These springs supply a reacting force proportional to the deflection.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!