
词语导航
基本信息
词语:火工品
繁体:火工品
拼音:huǒ gōng pǐn
英语翻译
【化】 initiating explosive devices
分词翻译
火的英语翻译:
ammunition; anger; fire; urgent【医】 fire; ignis; pyro-
工的英语翻译:
labour; man-day; project; skill; work; worker品的英语翻译:
article; class; grade; quality; rank; sample; savour翻译例句
1. 对常用几种火工品药剂激光感度进行了试验研究。
The laser initiation test for several common explosive initiator compositions has been carried out.
2. 提出一种灼热桥丝式电火工品发火可靠性设计方法。
A firing reliability design method for hot bridge-wire electro-explosive device was put forward.
3. 变差系数是进行火工品可靠性设计的重要参数之一。
Using the upper limit of coefficient of variation for mechanical explosive devices, the reliability design for initiating explosive device was developed.
4. 由此出发,构造了火工品可靠度的置信下限估计方法。
Based on the new estimation method, an estimation method of confidence lower with limit of the initiating devices reliability is proposed.
5. 利用瞬态脉冲试验对电火工品的感度性能进行了实验研究。
The sensitivity of electric explosive device is studied through transient pulse test.
6. 对自毁装置火工品在级间热分离过程中的安全性进行了研究。
The safety of pyrotechnics of self-destruction system in hot-splitting process was studied.
7. 电火工品的电磁脉冲危害测量采用新型白光光纤温度传感器。
A new kind of white light optical fiber temperature sensor is used to test electromagnetic pulse harm to the electric explosive device.
8. 瞬态脉冲试验是一种对桥丝式电火工品进行无损检测的方法。
Transient pulse test is one kind of nondestructive test method employed to test bridge wire electric explosive device (EED).
9. 火工品,作为发动机研制中的重要组件,起着极其重要的作用。
EED as an important development engine components, plays an extremely important role.
10. 文摘:火工品用外购器材的质量问题是影响产品质量的重要因素。
Abstract: quality of the external purchase equipment is the main factor that influence the quality of initiating explosive device.
11. 实验结果表明该系统能够较好地满足辨识火工品药柱剂量的要求。
Experiment results show that this system can satisfy the identification requirement of loading materials for initiating explosive device.
12. 论述了火工品失效分析的概念、分类、失效模式及失效分析技术。
The concept, classification, mode and analysis technique of initiating explosive device failure are addressed.
13. 同时,分析线性缓冲器在火工品药剂自动压药工艺中的其他作用。
In addition, other functions of linear buffer are analyzed in the automatic powder press process of loading materials for initiating explosive device.
14. 本文是从电火工品防射频的角度,对电火工品的设计过程进行分析。
This article from the RF wave protection of EED, carries on the analysis to design process of EED.
15. 定义了热点火温度,将桥丝式电火工品的热点火过程分为升温阶段和爆炸阶段。
Thermal ignition temperature was defined, the thermal ignition process of electric hot wire initiating devices was divided as calefactive phase and explosion phase.
16. 该卡在火工品爆炸测试中,按照非触发双缓冲异步连续模拟输入模式进行设计。
PCI-9112 is designed according to the input model of asynchronous continuous simulation for non-trigger double buffer.
17. 充分考虑电火工品的结构及性能,提出了改善电火工品抗射频性能的方法和措施。
Considering structure and performance of EED, it proposed the methods and measures to improve the performance of EED.
18. 火工品动态着靶的过载问题直接影响火工品在发射和动态着靶时的安全性和可靠性。
The over-loaded problems of initiator have direct influence upon its security and reliability, esp. in the case of emission and dynamic impacts.
19. 结果表明:两种方法预测的安全电流较高的电火工品,在相同的恒流脉冲下发火的概率较小。
The result shows that the electric explosive devices with the higher predicated no-firing current have the smaller probability to detonate through the same pulse.
20. 分析了NDP在电火工品无损检测中电桥自动调平衡的方法、参数计算及硬件电路和软件流程图。
Analyzes the method of auto balance, parameter calculation, hardware circuit and software flow chart of electric bridge of NDP in the non -destructive testing of EED.
21. 用有限差分法对该模型方程进行求解,得出了桥丝式电火工品的三维温度场分布,并对结果进行了分析。
The model equations are computed by means of a finite-difference method. The three dimensions of temperature fields for EED are gained and the results are discussed.
22. 应用贝叶斯方法研究了火工品买卖方风险问题,在先验分布和历史数据下,给出了买卖方风险的计算公式。
This paper discusses the risk research of pyrotechnics for the buyer and seller with the Bayes method. Under the historical data and prior distribution, the formulation of risk is obtained.
23. 因此,认为有实现电火工品单发发火性能预报的可能性,并对发火性能预报的两种无损检测方法进行了讨论。
For this reason, to prophesy of the firing character for one EED individually is possibility, and two methods that prophesy of the firing charater of EED are discussed.
24. 导弹地面测发控系统可以对导弹进行发射控制、时序检测和火工品通路阻值测量,其整体构成采用分布式结构。
A low cost missile ground test and control system adopts distributed structure, which can carry out launch control, time sequence detection and pyrotechnics channel resistance measurement.
25. 此测试系统有数据处理方便和测量误差小等优点,为桥丝式电火工品的电磁环境效应评估提供了一条新的途径。
A new method is provided to confirm the safety and reliability of the electric ignition system in electromagnetic environment.
26. 1993年,午夜骑士终于得到了他们早就应该承认从音乐行业,赢得了格莱美的大部分火工品在一个最简单的。
In 1993 the Midnight Riders finally got their long-overdue recognition from the music industry, winning the Grammy for Most Pyrotechnics in a Single Concert.
27. 针对导弹火工品测试中效率低、安全性差、过程繁琐白勺问题,提出了基于ARM白勺火工品自动测试仪设计和实现。
Aimed at the problem of lower efficiency, poor safety, and complicated operation in the test of pyrotechnics, design and realization for pyrotechnics auto_test based on ARM are developed.
28. 通过加速寿命试验促使电火工品老化,利用瞬态脉冲试验,得到电火工品的温升曲线,点火压力的变化及50%发火点。Www.weNtIyI.com
By means of speeding up the aging of the EIP and transient pulse test, the temperature-rising curve of EIP, the variation of the ignition pressure and 50% ignition point are obtained.
29. 在三维热传导理论的基础上,研究药剂按零次阿累尼乌斯定律发生热分解时,所产生的热量对电火工品(EED)三维热场分布的影响。
Based on the theory of 3 dimension heat transfer, the influence of heat created by priming decomposing according to the zeroth Arrhenius law on the temperature field in EED was researched.
30. 为了实现火工品高可靠性指标的小样本评估,研究了火工品可靠性评估小样本试验设计方案,给出了基于试验信息熵的小样本试验设计方法。
To assess the high reliability of initiating explosive device with small samples, the test design plan with small samples for initiating explosive devices was studied.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
