
词语导航
基本信息
词语:胀塑性
繁体:脹塑性
拼音:zhàng sù xìng
英语翻译
【化】 dilatancy
分词翻译
胀的英语翻译:
bulge; distend; expand; swell
塑的英语翻译:
model; mold
翻译例句
1. 采用塑性增量理论,建立了波纹管液压胀形的应力、应变数值计算方法,解决了波纹管液压胀形工艺的理论计算问题。WWW.weNtiyI.cOm
By plasticity increment theory, the stress strain numerical calculate methods of bellows bulge forming, solvers theory calculating problems of bellows bulge forming technology are put forward.
2. 分析了剪胀和软化程度对球孔扩张时的应力、位移、塑性区半径及极限扩张压力等方面的影响,并将大、小应变理论的结果进行了比较。
The influence of softening extent on stress, displacement and the radius of plastic zone during expansion as well as the extreme expansion pressure are studied.
3. 采用大变形刚塑性有限元法模拟超塑性材料轴对称锥形模约束胀形过程。
The constrained superplastic bulging process is investigated by a large rigid-plastic finite element method.
4. 此文对利用塑性介质挤胀成形三通管接头变形力进行了实验研究。
In this paper, an experimental research on extrude-bulge forming of tee junction using plastic medium has been conducted.
5. 采用塑性变形理论研究了薄壁管液压胀形过程中轴向载荷与内压力的变化情况。
Based on the theory of plasticity, the variety rule of internal pressure and axial force in the process of thin tube bulge forming is studied.
6. 实验结果表明,复合胶原溶胀液具有假塑性流体的特性。
The experimental results show that the composite collagen dispersion behaves pseudo-plastic fluid.
7. 根据后桥壳液压胀形的特点,选择刚塑性材料模型进行模拟分析。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
8. 本文根据液压胀形的特点,利用塑性变形原理,提出评定板材成形性能的液压胀形试验法。
According to the character of hydraulic bulge and the theory of plastic deformation, a testing method of hydraulic bulge to evaluate the forming property of sheet metals is put forward.
9. 结果表明,颗粒破碎程度与对其输入的塑性功密切相关;颗粒破碎的发生使钙质砂剪胀性减小,体积收缩应变增大,峰值强度降低。
The results indicate that particle breakage depends on the sample′s plastic work received during testing, and reduces the volume expansion and peak strength of the sands.
10. 超塑性胀形控制有各种方法,本文介绍了一种按气压与高度曲线控制的方法,使成形过程更接近于等应变速率胀形,能进一步改善零件厚度的不均匀性。
This paper introduces a method to controll a superplastic bulging by a gas-pressure and a height curve. This method can significantly reduce the thinning rate and unevenness of bulging material.
11. 给出了塑性区中平均体积应变及弹、塑性变形体积的计算公式和剪胀角的测试方法。
The expressions of elastic deforming volume and plastic deforming volume in the plastic zone were presented together with the average plastic volumetric strain.
12. 本文用弹塑性大应变的有限无法对几种不同介质中均匀胀膨球的应力、应变和位移场作了计算。
A computer program of isoparametric finite element for large elastisplastis strain was used to calculate the displacement-strain fields of a homogeneous expansive sphere in many-layer medium.
13. 本文用弹塑性大应变的有限无法对几种不同介质中均匀胀膨球的应力、应变和位移场作了计算。
A computer program of isoparametric finite element for large elastisplastis strain was used to calculate the displacement-strain fields of a homogeneous expansive sphere in many-layer medium.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
