轴对称元用英语怎么说,轴对称元的英文翻译


词语导航

基本信息

词语:轴对称元

繁体:軸對稱元

拼音:zhóu duì chēng yuán

英语翻译

【化】 axisymmetric element

分词翻译

轴对称的英语翻译:

【机】 axial symmetry

元的英语翻译:

basic; buck; chief; dollar; first; Yuan
【经】 dollar; yuan

翻译例句

1. 数值实验表明该轴对称元具有好的精度。

Numerical experiments indicate that the element is of good accuracy.

2. 本文首先利用组合杂交有限元法得出了一个四节点轴对称元。

A 4-node axisymmetric solid element is derived by combined hybrid methods in this paper at first.Www.wentiYI.cOm

3. 利用组合杂交有限元法得到了一个四节点轴对称元,并采用协调等参双线性位移来逼近及分片常数应力模式。

A 4-node axisymmetric solid element is derived by combined hybrid methods. Compatible isoparametric bilinear displacement approximations and the constant stress mode are employed.

4. 采用轴对称模型和有限元方法,模拟了大秦线长大坡道循环制动条件下货车车轮温度和应力场,结果表明车轮高应力区出现在辐板上,现行制动条件下车轮强度满足使用要求。

The temperature and stress field of wagon wheel under the condition of long ramp way cycle braking in Daqin line have been simulated by using FEM and axial symmetry model.

5. 然后,采用轴对称热传导模型,利用分区边界元法,对198型柴油机活塞温度场进行了计算。

Then, by the use of axisymmetric heat conduction model, the temperature field of 198-type Diesel engine"s piston is calculated with subregion boundary element.

6. 基于面元法,通过在回转体和空泡表面分布源汇的方法,建立了求解轴对称回转体局部空泡流场的数学模型。

Based on panel method, the mathematic model of partial-cavity flow field for axisymmetric body is given by use of the sources of distributing on the bodies and cavity surfaces.

7. 介绍了轴对称场的有限元模型及其用于计算金属内部磁场分布的结果。

Briefly introduces the finite element model of axisymmetric field and the results of magnetic field calculation in metal.

8. 使用包含一个橡胶和空穴的轴对称模型的有限元计算来分析橡胶增韧环氧树脂细观上的力学行为。

The finite element method was employed to study the micromechanics in rubber toughened epoxy resins using the axisymmetric model contained a rubber and a hole.

9. 根据计算流体力学与传热学原理,建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。

Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.

10. 建立了取样管与沉积物接触的二维轴对称有限元模型。

A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.

11. 推导了轴对称线性三角形元的影响系数矩阵和输入向量公式;

The influence coefficient matrix of the linear axisymmetric triangular element and the input vector expression are derived.

12. 又作了轴对称的有限元分析,能估算次生裂缝出现时的荷载以及次生裂缝出现后的端部滑移。

An axisymmetrical finite element analysis is also made, with which the secondary cracking load and the end slip after secondary cracking can be predicted.

13. 系统分析了带有非轴对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In the article we analyse the structure compose, the endure force status, the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

14. 建立一种子午线轮胎的轴对称非线性有限元模型,用以模拟轮胎的轮辋定位充气自由旋转过程。

A nonlinear axisymmetric finite element model was built to simulate position on rim, inflation and free rotation of radial tire.

15. 研究应力杂交有限元方法,推导计算公式,将其应用在轴对称问题中。

Hybrid finite element method is analyzed and applied in the axisymmetric problem, of which the calculation equations are deduced.

16. 介绍了一种用于分析轴对称谐振腔的混合阶矢量有限元法。

A kind of mixed-order vector finite element method for axial-symmetric cavities is introduced.

17. 采用轴对称动力有限元结合系统识别反分析理论进行路面模量反算,考虑了落锤式弯沉仪(FWD)荷载作用下的路面反应动力效应。

This essay adopts limited units of axial symmetry and theory of system recognizing backcalculation, in which the dynamic effect of the road surface reaction to load of FWD is considered.

18. 本文提出了一种改进的计算轴对称场的高阶有限元方法。

An improved high-order finite elements method is presented to calculate axisymmetric field problems in this paper.

19. 本文应用摄动法给出了一种简便的计算任意二元和轴对称细长喷管可压缩有势流动的近似解析方法。

A simple and approximate analytical method for calculations of compressible potential flows in arbitrary two-dimensional and axially symmetric slender nozzles is given using perturbation technique.

20. 再次,运用二维轴对称有限元法以及三维有限元法,系统分析了挤扩支盘桩单桩和群桩的承载变形性状。

Thirdly, the bearing and deformation characteristics of single and group piles are investigated by means of axisymmetric finite element analysis (FEA) and three-dimensional FEA.

21. 考虑桩周土体及桩–土接触的非线性,建立了空间轴对称有限元模型;

The spatial axisymmetric finite element model is established considering the nonlinear of the soil and the interface between pile and soil.

22. 采用轴对称有限元法计算了油罐的整体应力,引入接触单元法模拟地基与底板的相互作用。

The axisymmetric finite element method was proposed to calculate the whole stress of tank. This method applied the contact element to simulate the interaction between foundation and tank bottom.

23. 介绍了基于有限元法模拟电阻点焊熔核形成过程中的轴对称电、热、力耦合场的模拟模型。

Based on FEM, an axis symmetric finite element electro-thermo-mechanical model in the formation of molten core of resistance spot welding is introduced.

24. 根据三层不锈钢板电阻点焊熔核形成过程,建立了模拟三层板点焊温度场的轴对称有限元模型。

An axisymmetric finite element model is developed to simulate the temperature field of resistant spot welding according to the process of nugget formation of three layers stainless steel sheets.

25. 利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。

The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS.

26. 利用轴对称线弹性模型有限元方法,计算了洞室中温度微小年变化引起的地倾斜和地应变。

In this paper, finite element method (FEM) of axisymmetric linear elastic model has been used to calculate the tilt and strain induced by small annual temperature variations in a deep tunnel.

27. 边界元法用于计算轴对称管道及消声器内部声场与管口声辐射问题。

The BEM is applied to calculating the acoustic field in axisymmetric ducts and mufflers as well as the sound radiation from open end.

28. 采用矢量有限元方法计算了任意轴对称谐振腔高阶模的本征频率。

Eigenfrequencies of high order modes in the axial-symmetric cavities are computed with a vector finite element method.

29. 本文用有限元方法建立了求解轴对称非稳定温度场的数学模型和电算程序。

By using the finite element method, the solution for solving the mathematic model and electrical computer program of axisymmetric unsteady state temperature field has been found.

30. 温度场及应力场的计算采用轴对称有限元法。

In the analysis of the temperature and stress field, the axis-symmetry finite element method is employed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!