
词语导航
基本信息
词语:模塑
繁体:模塑
拼音:mó sù
英语翻译
【化】 molding
分词翻译
模的英语翻译:
model; module; mould; pattern【计】 M; MOD; modulo
【化】 mould
【医】 die; mol; mole
塑的英语翻译:
model; mold翻译例句
1. 感谢您对1.2米的片状模塑料机器的兴趣。
Thank you for your interest in a 1.2 m SMC Machine.
2. 厂商当时正在寻求一种易模塑、廉价的绝缘体。
Manufacturers were starving for a better insulator that was easily moldable and inexpensive.
3. 本文描述了纸浆模塑餐具的性能优势和市场分析。
The performance superiority and market analysis of pulp model tableware have been described in this paper.
4. 调试和安装装饰件,如门,楼梯,模塑和硬件设备。
Fit and install trim items, such as doors, stairs, moulding and hardware.
5. 这一金属镀层过程对铬掩模塑料有非常广泛的作用。
The metalization process is used to chrome plate plastic for a variety of USES.
6. 传递模塑旨在模具复杂物体的小深孔或许多金属刀片。
Transfer molding was designed to mold complex objects with small deep holes or many metal inserts.
7. 该设备提高了纸浆模塑制品的产量和质量,降低了产品成本。
The equipment can improve output and quality of pulp molding product, and reduce production cost.
8. 纸浆模塑制品已有很久的历史,很早就是纸制品的一个分子。
The paper pulp compression molding product had the very long history, very early is a paper product member.
9. 本文介绍了一种拉挤模塑玻璃钢格栅的生产工艺及其力学性能。
The production process and mechanical properties of pultruled FRP grids are introduced in this paper.
10. 术语“玻璃纤维模塑”仅仅是指树脂与一些玻璃纤维增强的产品。
The term fiber glass molding correctly refers only to products involving a resin and some form of glass fiber reinforcement.
11. 论述了模塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Molding method, process, and equipment of injection molding of molding compound had been discussed in this paper.
12. 本文阐述了单模塑料光纤和单模石英光纤的自动耦合的原理及其实现。
The principle and realization of auto-coupling system for single-mode POF and silica fiber is introduced in this paper.
13. 结果表明:随着热处理温度的不同,模塑粉的结晶形态也相应发生变化。
The results showed that the state of polyimide moulding powder changed with heat treating temperature.
14. 对结晶不饱和树脂增稠聚酯模塑料的中温低压模压成型工艺进行了研究。
In this paper, molding process for low-pressure sheet molding compounds thickened by crystalline unsaturated polyester was investigated.
15. 本文介绍一种运用参数化设计用于包装的纸浆模塑制品及模具的新方法。
This article introduces a new method in parameterization design of pulp model products for packaging and mould.
16. 建筑外表面覆盖了模塑玻纤板,采用石膏和灰泥饰面以实现光滑度和延伸感。
The buildings exterior surface is covered in molded fiberglass panels with a plaster stucco finish to achieve the smooth and stretched quality.
17. 在分析原有纸浆模塑托盘结构的不足的基础上,设计出层叠式纸浆模塑托盘。Www.WeNTIYi.COM
A stack molded pulp tray was proposed and designed on the basis of analysing original molded pulp tray.
18. 对CFC - 11替代、模塑泡沫低密度化等方面技术发展趋势加以讨论。
The tendency for replacement of CFC-11 and low density molded foam technologies is also discussed.
19. 纤维预成型技术是复合材料液体模塑工艺(LCM)低成本化中的重要方面。
The fabrication technology of fiber preforms for liquid composite molding ( LCM ) is an important aspect on cost-effective composites.
20. 膨胀挤出模塑,采用该法的挤出模塑装置,及用于制备压敏粘合剂片材的方法。
Expansion extrusion molding, extrusion molding apparatus therefor, and process for producing pressure-sensitive adhesive sheet.
21. 不同形式的聚乙烯有许多用途,例如涂料、包装膜、模塑件、绝缘材料、管道等。
The various forms have a multitude of USES as coatings, packing films, molded parts, insulation, piping, etc.
22. 重点介绍了自攻螺钉连接、模塑后嵌入的嵌件连接,卡入连接等较新的连接技术。
It mainly introduces a new joint technology of self-tapping screw, insert joint after injection molding, snap joint, etc.
23. 树脂传递模塑工艺(RTM)是纤维增强聚合物基复合材料的重要制备工艺之一。
Resin transfer molding(RTM) is one of the important processes for fabrication of fiber-reinforced polymer-matrix composites.
24. 不是廉价的,公开的电位器,我们使用共同模塑花盆,提供大量应变和影响力救济。
Instead of cheap, unsealed potentiometers, we use co-molded POTS, which offer substantial strain and impact relief.
25. 本文介绍了低发泡快速模塑成型酚醛玻璃钢技术,讨论了影响制品性能的各种因素。
The low foaming and fast moulding phenolic FRP technique were introduced, the different factors affecting the product properties were discussed.
26. 本文综述纸浆模塑餐具的生产过程、工艺技术、成型设备、产品质量及其发展前景。
This paper reviews the production process and technology, formation equipment, product quality and its development prospects.
27. 研究了一种满足新型汽车车灯反射器的使用要求的低收缩率的耐高温不饱和聚酯模塑料。
This paper introduces a high-temperature resistant and low shrinkage unsaturated polyester molding compound used for a novel reflector of automobile lamp.
28. 研究了一种满足新型汽车车灯反射器的使用要求的低收缩率的耐高温不饱和聚酯模塑料。
This paper introduces a high-temperature resistant and low shrinkage unsaturated polyester molding compound used for a novel reflector of automobile lamp.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
