料封用英语怎么说,料封的英文翻译


词语导航

基本信息

词语:料封

繁体:料封

拼音:liào fēng

英语翻译

【化】 material seal

分词翻译

料的英语翻译:

expect; feed; material; stuff
【化】 filter material

封的英语翻译:

envelop; seal
【经】 seals

翻译例句

1. 产品用途:高压电器件的绝缘浇注料、环氧灌封料、塑封料、包封料、绝缘子、干式变压器、高压互感器、填料等。

Uses:Packing of high tension electrical equipment, epoxy pouring packing material, plastic pacing material, dry type transformer, high tension mutual inductance equipment, insulator.

2. 用分条机做出得产品具有自动封边的效果,分条的卷料两边绝对平行,端面平整。

The products made by this machine have automatic banding effect, and roller fabric slitting sides are parallel. Besides, its end faces are very smooth.

3. 电子工业用加成型液体硅橡胶灌封料的关键技术指标为:胶料黏度、硫化胶力学性能和电性能。

The key properties of additional liquid silicone potting material in electronic industry are viscosity, mechanical property and dielectric property.

4. 用于混凝土墙板、板、风管道的防水密封,金属制品、棉板、膏板、料等轻型板材和门窗的防水、封。

Used for the waterproof sealing on concrete wall panel slab ventilation pipes the light weight panel products window and doors of metal products asbestos boards gypsum board wood plastic etc.

5. 用于混凝土墙板、板、风管道的防水密封,金属制品、棉板、膏板、料等轻型板材和门窗的防水、封。

Used for the waterproof sealing on concrete wall panel slab ventilation PIP es the light weight panel products window and doors of metal products asbestos boards gypsum board wood plastic etc.

6. 用于混凝土墙板、板、风管道的防水密封,金属制品、棉板、膏板、料等轻型板材和门窗的防水、封。

Used for the waterproof sea ling on concrete wall panel slab ventilation pipes the light weight panel products window and doors of metal products asbestos boards gypsum board wood plastic etc.

7. 研究了汽车点火线圈用聚氨酯灌封料的应用工艺。

This paper introduces the advantage, the technical performance and application of polyurethane potting material used in automobile ignition coils.

8. 针对如何解决环氧树脂灌封料在低温下易产生开裂这一问题进行了探讨。WWW.WenTIyI.coM

The problem of crack initiation in epoxy resin sealing compounds at low temperature is discussed in this paper.

9. 封层施工中,沥青粘结料与碎石的撒布量是关键。

Asphalt binder materials and the cloth is the key factor of dressing construction.

10. 作为技术难点,作者对粘性环氧料灌封电子本体技术进行了详尽地研究和试验。

As technical difficulty, the author makes experiment and undertakes research on the technology of dosing electronic body detailed.

11. 真空树脂灌注机是对电子器件进行灌封处理的关键设备,必须控制灌注料的温度始终维持在某一适当的水平上。

Vacuum resin dosing equipment is the central equipment of the disposal perfusion and encapsulation which need precise temperature control at certain level.

12. 介绍了一些航空电器产品对灌封材料的要求及双组份聚氨酯泡沫灌封料在航空电器产品中的应用。

This article introduces some requirements of aviation electric apparatus to packing materials and a two-pot polyurethane foam pouring compound for this purpose.

13. 基于稀封层混合料的特点,探讨了公路养护中稀浆封层技术的应用范围。

Based on the feature of slurry seal mixture, the paper explores the application scope of slurry seal technology in highway maintenance.

14. 实际应用表明,它改善了稀浆混合料的和易性,提高了稀浆封层的抗滑性、抗渗性。

The application shows rubber powder can improve workability of slurry mixtures, and antiskid property and anti-permeability of slurry seal courses.

15. 把需要包装的物品放入推料托手动推入然后封切。

The need for packaging material goods Add to push into care and then manually cut closure.

16. 介绍了电子封装材料绿色阻燃耐开裂环氧树脂灌封料的生产新方法。

A new production method of green electrical packaging material, which can resist fire and crack epoxy resin sealing compounds was introduced.

17. 结果表明,所研制的聚氨酯灌封料性能基本达到PU200的水平。

The result showed that the property of the developed PUR pouring material reached basically the level of PU200.

18. 讨论了其主要组分对灌封料性能的影响,并确定了最佳工艺条件。

The effects of primary compounds on the property of the potting compound were studied and the optimum technological factors were determined.

19. 本文简介了环氧阻燃包封料的阻燃机理以及影响其阻燃效果的各种因素,最终确定其配方及制备工艺,并对其应用做了评估。

Flame retarding mechanism, influence factors of anti-flammability and application of epoxy encapsulating materials for polyester film capacitor were described in this paper.

20. 得出下面两个结论,一是目数越大,混合料水稳定性越差,同步碎石封层的界面强度越差。

There are two conclusions, first, the greater the mesh count, the worse the mixture of water temperature and the Rubber asphalt synchronization crushed stone sealing course boundary strength.

21. 建议下筒体料时以封头外经展开尺寸下料!

Suggestions on cylinder body when its head out baiting size!

22. 同时,从产品结构设计、灌封工艺方面对如何改善环氧灌封料的抗低温开裂性能提出了一系列对策。

Meanwhile, a series of methods are proposed to improve the crack-resistant attributes by optimizing the techniques a...

23. 同时,从产品结构设计、灌封工艺方面对如何改善环氧灌封料的抗低温开裂性能提出了一系列对策。

Meanwhile, a series of methods are proposed to improve the crack-resistant attributes by optimizing the techniques a...

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!