上齿轮用英语怎么说,上齿轮的英文翻译


词语导航

基本信息

词语:上齿轮

繁体:上齒輪

拼音:shàng chǐ lún

英语翻译

cog

分词翻译

上齿的英语翻译:

upper

轮的英语翻译:

annulus; ring; take turns; wheel
【医】 wheel

翻译例句

1. 介轮箱(11)内的上齿轮(16)、下齿轮(15)和介轮(13)是固定啮合连接。

A cog (16), a lower gear (15) and a medium gear (13) inside a medium wheel box (11) are fixed mesh connection.

2. 本发明实施例解决了现有的双分流减速机中处在同级的两个传动轴上的齿轮与相邻级上齿轮啮合不同步的问题。

The embodiment of the invention solves the problem that the gears on two transmission shafts at the same level are not synchronously meshed with the gears at the adjacent level.

3. 人滑行中不断改变重心的位置,底座在车桥上摇动,通过滑槽、上齿轮、下齿轮、飞轮和车轮的作用,带动人向前滑行。

By changing the gravity center"s position of person, the base carries the person to slide forward at high speed under the action of relative parts.

4. 总的来说,我们的社会正在变成一个官僚化管理的大型企业,在这个企业中,人们成为了机器上运转良好的小齿轮。

In general, our society is becoming one of giant enterprises directed by a bureaucratic management in which man becomes a small, well-oiled cog in the machinery.

5. 每个工人在某种程度上都是这个运转良好的机器上的齿轮。

Each worker is, in a way, a cog in this huge, well-oiled production machine.

6. 这是一种一种持续的提醒,说你只是机器上的一个齿轮不需要在此安定下来。

It is a continual reminder that you are just a cog in the machine and mustn"t get too settled.

7. “有时候,我觉得自己像一台巨型机器上的一个齿轮一样普通而平凡。”利迪娅说。

"Sometimes, I feel as plain and insignificant as a gear in a giant machine," said Lydia.

8. 因此,尽管事实上没有变动齿轮,使用可调节滑杆调节扭矩以提供加速和减速时的震动,就像有个真实的变速箱似的。

So, even though no actual gears are being changed, using the paddle-shift modulates the torque to provide the jolts of acceleration and deceleration that would happen if there were a real gearbox.

9. 它由两个喷气涡轮引擎提供动力,以驱动五个叶片的主旋翼,以及通过齿轮箱和连轴驱动在两边短翼上的一对螺旋桨。

It is powered by two jet-turbine engines which operate both the five-bladed main rotor and, through a gearbox and shafts, a pair of propellers on two short wings.

10. 斐索,法国科学家,1850年用齿轮法测定了光速。这不是偶然,麦克斯韦认为光事实上也是一种电磁波。

Convinced that this was no accident, Maxwell went on to suggest that light is, in fact, an electromagnetic wave.

11. 启动机驱动安装在电枢转轴上的齿轮。

The starter drive gear is mounted on the armature shaft.

12. 那些姑娘仿佛做大机器上附属的齿轮都不如,只配做齿轮里的牙齿。

The girls did not so much seem accessory wheels to the general machinery as mere cogs to the wheels.

13. 将差速器向盆形齿轮调整工具处的变速器盖方向压,然后读取百分表上的间隙值。

Press the differential towards the transmission cover at the crown wheel adjusting tool and read off the backlash on the dial gauge.

14. 采用扇形不完全齿轮传动送料轮轴上的齿轮来完成,上、下滚轮的转速相同,但旋转方向相反。

The gear wheel is used to complete the rotation speed of the upper and lower rollers, but the rotation direction is opposite.

15. 在壳体上安装齿轮箱,确保齿轮箱轴键妥当地固定在耦合键槽中。

Mount gearbox on housing, assuring that coup ling key slot accepts gearbox shaft key properly.

16. 行星齿轮实际上是称为行星齿轮架或行星小齿轮架的保持架连接的一套齿轮装置。

The planet gears are actually one set of gears joined together by a cage called the planed gear carrier or planet pinion carrier.wwW.wENTIyI.com

17. 从整个传动装置上看,又省去了传统齿轮箱、齿轮以及联接的同心度要求。

From the whole transmission device on look, and tell the traditional gear box, gear and a connection request.

18. 提出一种在转子上设置虚拟支承的方法,以保证弧齿锥齿轮的啮合稳定性,并采用传递矩阵法,建立了弧齿锥齿轮-转子系统的振动模型。

This paper presents a method of providing a virtual support for the rotor to assure the meshing stability of a pair of a pre determined spiral bevel gears in rotation.

19. 此种齿轮泵回路的典型应用是工程机械上常可见到的行走、转向机构,它节省去一个辅助泵。

This kind of gear pump return route"s model application is on the engineering machinery Chang ke sees walks, the rotation gear, it saves a donkey pump.

20. 自行车的链条会驱动后轮轮轴上的太阳齿轮,将动力传送到四周的行星齿轮。

The bike chain drives a sun gear on the rear axle, which transmits power to planetary gears situated around it.

21. 坐在办公桌前的不再是个常人,简直成了台机器。那是忙碌的纽约股票经纪人,一台上满发条运作起来齿轮吱吱响的机器。

Thee machine sitting at that desk was no longer a man; it was a busy New York broker, moved by buzzing wheels and uncoiling springs.

22. 本文在粘弹性材料三参数模型的基础上建立了塑料齿轮接触问题的计算方法。

A calculation method of contact problem of plastic gears based on three parameters model of viscoelasticity material is presented.

23. 齿轮A位于驱动轴的末端,齿轮b在副传动轴上,它们恒定啮合。

Gear a, at the end of the drive shaft, and gear B, on the countershaft, are in constant mesh.

24. 这样外侧车轮轴上的半轴齿轮比内侧车轮轴上的半轴齿轮转动更快。

Thus, the side gear on the outer-wheel axle turns more rapidly than the side gear on the inner-wheel axle.

25. 如果应用于干燥固体颗粒、造纸原料、泥浆或压力超过所标注的限制值时,请参阅锥齿轮执行器网页上的相关信息。

Refer to information on bevel gear actuators for use on dry solids, paper stock, slurries or when pressure exceeds limits shown.

26. 本文介绍了试验情况并在此基础上对防止和减少齿轮磨耗提出了建议。

This paper introduces the test and presents some Suggestions to prevent and decrease gear wear on this basis.

27. 快速装卸,用以将附件(如液压泵,燃油泵,起动器等)接到发动机附件齿轮箱上的夹具。

QUICK-ATTACH-DETACH, a clamp for attaching accessories (hydraulic pump, fuel pump, starter) to the engine accessory gearbox.

28. 快速装卸,用以将附件(如液压泵,燃油泵,起动器等)接到发动机附件齿轮箱上的夹具。

QUICK-ATTACH-DETACH, a clamp for attaching accessories (hydraulic pump, fuel pump, starter) to the engine accessory gearbox.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!