传热的用英语怎么说,传热的的英文翻译


词语导航

基本信息

词语:传热的

繁体:傳熱的

拼音:chuán rè de

英语翻译

diathermanous

分词翻译

传热的英语翻译:

【化】 heat transfer; heat transference; heat transmission
thermal transmission

翻译例句

1. 传热的方法有三种:传导、辐射、对流。

There are three ways of heat transfer:conduction, radiation and convection.

2. 这就是通过窗户向环境传热的主要方式之一。

This is one of the principal modes of heat transfer through windows and out to the environment.

3. 铜是传热的良导体。

Copper is a good medium for conducting heat.

4. 传热的数值计算法。

Numerical methods in heat transfer.

5. 本试验设计并制作了一台固体传热的动物模型。

A model animal with solid heat transmitting medium was designed and made in the experiment.

6. 直接交换面积是区域法计算辐射传热的基础数据。

The direct exchanging area is essential for zone method to calculate radiative heat transfer.

7. 本文综述了多孔表面用于强化沸腾传热的研究工作。

Researches on boiling heat transfer enhancement on porous surfaces are reviewed.

8. 本文提出了一个半圆型垂直沟槽管冷凝传热的物理模型。

New physical models of condensation heat transfer on semicircle type corrugated surfaces were presented.

9. 本文还讨论了试验结果及T形翅片管强化沸腾传热的机理。

The experimental results and mechanism of heat transfer enhancement of T—Shaped fin tube were discussed.

10. 在算法中全面考虑了埋设介质的变热物性对管道传热的影响。

It is completely considered the influence of variably physical property upon heat transfer of pipeline in the algorithms.

11. 本文提出了在余弦型波纹表面上进行冷凝传热的一个新物理模型。

A new physical model of condensation heat transfer on cosine-type corrugated surfaces is presented.

12. 结果表明采用新型结构能在强化传热的同时降低微通道进出口压差。

And experimental results show that the new structure microchannels can enhance heat transfer and reduce pressure drop across microchannels at the same time.

13. 基于地下厂房的传热机理,建立了深埋地下建筑动态传热的数学模型;

Sets up a mathematical model of unsteady heat transfer of deep underground structure based on the mechanism of heat transfer.

14. 本文介绍采用螺纹管强化地热发电用有机物质冷凝器传热的实验研究。

This paper describes experimental study of spiral fluted tube organic condensers to enhance heart transfer for geothermal power generation.

15. 本文探索了一种低散热发动机陶瓷表面传热的实验研究方法—表面温度法。

An experimental researching method-surface temperature method for heat transfer on ceramic coat in low-heat-rejection engine was developed.

16. 本文导出卡诺热机工作于不可逆传热的情况下,最佳效率与输出功率间的关系。

The relation between optimal efficiency and power output of a Carnot heat engine which operates subject to irreversible heat transfer is derived.

17. 文中根据连续统一模型建立了描述反向凝固结晶器中的流动与传热的数学模型。

A mathematical model depicting the flow and he at transfer in the inverse solidification mold is built up according to the continuum model.

18. 应用数值方法研究了燃气透平动叶顶部凹槽对动叶气动性能及叶顶传热的影响。

Effects of squealer tips on blade aerodynamic performances and tip heat transfer in a gas turbine were investigated.

19. 这对深化表面涂层强化冷凝传热的机理以及选择传热表面涂层材料具有指导意义。

It is of considerable significance to get more insights into the mechanism of condensation heat transfer enhancement by means of surface coatings.

20. 在连续统一模型的基础上建立了描述反向凝固结晶器中的流动与传热的数学模型。

Model that describes the flow and heat transfer in the crystallizer during inverse solidification was developed based on continuum equation.

21. 从直流电弧的特征出发,分析了直流电弧炉的传热及改善直流电弧炉传热的途径。

Based on the characteristics of DC electric arc furnace the heat transfer and the measures to improve it are introduced.WWw.wenTiYI.COm

22. 把传热的基本原理用于油田的管道、罐体等保温工程,将从根本上促进节能工作。

Applying the basic heat transmission principles to the thermal insulation of pipelines, tanks in oil field will promote the energy-saving work substancially.

23. 异种气体射流强化传热的新方法即使在“负温差的情况下也有很高的热流量发生。”

A new method of heat transfer augmentation with foreign gas jet impingement has recorded very high heat flux even in the case of "negative temperature difference".

24. 本文是一篇关于利用整体型内螺旋翅片管强化沸利昂12干式蒸发器传热的试验报告。

This paper is an experimental report on heat transfer enhancement of freon-12 dry evaporator using integral internal spiral fin tube.

25. 在分析浅埋工程围护结构传热机理的基础上,给出浅埋工程围护结构传热的数学模型。

On the basic of mechanism analysis, this paper deduces the mathematics model of heat transfer of shallow buried underground engineering.

26. 可见冷桥对墙体传热的影响只有通过二维、三维的温度场模拟才能比较准确地反映出来。

That means the influence of thermal bridge on the heat transfer across a wall can only be accurately calculated by two or three dimension temperature distribution simulation.

27. 为了减少气体对流对传热的影响,测量必须在低气压下进行,然后通过线性外推求算结果。

The measurement chamber must been kept with low vacuum in measuring for that gas convection affecting thermal conductivity is reduced.

28. 数学模型在生物传热的研究中占有极其重要的地位,是进行理论探讨和现实应用的共同基础。

Mathematical model is very important to the study of Bio-heat transfer, and it is also the common foundation for both of the theoretical research and practical application.

29. 建立了描述反向凝固结晶器中流动与传热的数学模型,并在此模型基础上进行了计算机模拟和仿真。

The mathematical model which describes the flow and heat transfer in inverse solidifying mold was established. Base on the model, a series of study with computerized simulation was taken.

30. 给出了多层球形墙体的热传递矩阵,提出了用频域回归(FDR)方法计算球形墙体瞬时传热的方法。

Presents the transmission matrix of heat transfer of multilayered spherical walls and introduces the calculation procedure of frequency-domain regression (FDR) method.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!