
词语导航
基本信息
词语:芯块
繁体:芯塊
拼音:xīn kuài
英语翻译
【电】 slug
分词翻译
芯的英语翻译:
core
块的英语翻译:
lump; agglomeration; clump; dollop; loaf
【计】 B; block
【医】 block; lump; mass; massa
翻译例句
1. 它会转化成燃料芯块。
It is converted into fuel pellets.
2. 它包括混凝土芯块和外保温层。wWW.wentIYi.com
It includes concrete core block and external insulating layer.
3. 并简要介绍了二氧化铀核燃料芯块的烧结理论。
The sintering theory on nuclear fuel pellets is also introduced simply.
4. 通过限制线功率密度,可以限制燃料芯块的温度。
The temperature of fuel pellets can be limited by linear power density restriction.
5. 试验研究了微氧化气氛下二氧化铀芯块的低温烧结。
The low-temperature sintering of UO_2 pellets in the partial-pressure oxidization atmosphere is studied.
6. 芯块进入燃料元件,在那里燃料元件是,组合成燃料组件,就在那。
Pellets go into fuel pins where the fuel pins are assembled into fuel assemblies, which is right here.
7. 介绍了核电站燃料元件uo_2芯块的间隙无损检查仪。
The tester for nondestructive testing the gap between the UO2 pellets of fuel rods is described.
8. 热应力是碳化硼芯块在核反应堆使用中破裂的重要原因之一。
Thermal stress is one of the main reasons affecting on the boron carbide pin rupture when it is used in nuclear reactors.
9. 影响UO_2芯块水含量的主要因素是芯块的密度和空气的湿度。
The primary factors which affect the water content in UO_2 pellets are pellet density and air humidity.
10. 以及不用抽芯块的原理来设计钢管弯曲模具,从而提高工作效率。
Meanwhile, it also introduces the design of bending die for steel tube using the principle of take out slug, which can improve the work efficiency.
11. 现在,你们看过了这些幻灯片,它们的芯块,进入大头针里,然后变成组件。
Now you saw some of these slides where pellets go into pins which are then made into assemblies.
12. 叙述了进行的UO_2粉末筛上料气流粉碎试验,并进行了制备芯块研究。
This paper describes experiments of UO_2 powder superior to screen comminution by airflow, and processes research of pellets preparation.
13. 本文介绍了在UO_2粉末中加入造孔剂制备低密度uo_2燃枓芯块的方法。
In this paper, the method fabricating the lower density UO_2 fuel pellet is investigated.
14. 本发明的另一主题是使用根据本发明的装置向烧结舟中装载核燃料芯块的方法。
A method for filling the nacelle with nuclear fuel pellets using the inventive device is also disclosed.
15. 核燃料组件是由圆柱状的二氧化铀芯块做成的燃料棒,然后按照一定顺序组装起来。
Fuel assembly is a cylindrical pellets made of uranium dioxide fuel rods, and then assembled according to a certain order.
16. 所述侧芯具有用于形成所述物品的模制位置和 用于将所述物品从所述芯块顶出的顶出位置。
The side core has a molding position for forming the article, and an ejection position for ejecting the article from the core block.
17. 在实施例中,所述装置包含用于形成所述容体部分的芯块和用于形成所述盖子的可移动侧芯。
In an embodiment, the device includes a core block for forming the vessel portion and a movable side core for forming the lid.
18. 采用U_3O_8添加剂可改善芯块微观结构,但同时使芯块密度下降,开口孔隙度增加进而导致吸湿加剧。
The use of U3O8 additive can improve the pellet microstructure, but result in decrease of pellet density and increase of open porosity, which contributes strongly to moisture.
19. 该系统利用旋转台带动芯块进行回转、通过光栅传感器测量端面圆跳动误差的方法,实现了核燃料芯块垂直度的自动检测。
Using the grating displacement transducer for measuring end circular run-out error during the pellet rotation course droved by a rotation stage, the system realized the pellet automatic detection.
20. 现在,当你们观察这个,你们能看到这些人,铀正在处理铀芯块,现在,在这个形式里,是活跃度是很低的,因为铀5,的半衰期很长。
Now when you look at this you see these people handling the uranium pellets. Now uranium 235 in this form is very low in activity because uranium235 has a very long half-life.
21. 气体反应堆要求充实,以此能,达到20%,所以,我们需要制造出在芯块中的铀,那是锆管道的金属外壳,那被放置入一个反应堆核心里去。
Gas reactors require enrichments in the order of up to 20%. So we need to fabricate the uranium into pellets which are clad in zirconium tubes which are placed into the reactor core.
22. 干燥方式并不对adu的颗粒结构和形态产生影响,由它们得到的UO_2粉末和芯块性能不存在因adu于燥方式不同而带来的差别。
It has been believed that these drying methods have no influence on structure and shape of ADU particle, and thereby no difference will be made to the properties of UO2 powder and pellet.
23. 该模具采用了手动齿轮抽芯和活动镶块两种机构。
Adopted manual gear core-pulling and the moving insert block core-pulling .
24. 介绍了摆动块内抽芯机构,并设计了摆动块内抽芯注射模。
The core-pulling mechanism with swing block was introduced, and an injection mold with swing block was designed.
25. 采用燕尾槽活块结构解决了卡头内腔出芯问题。
The core shakeout problem for clamp casting was solved using dovetail slot structure.
26. 对叶块成型芯轴的结构进行了设计改进。
The structural design of molding mandrel of pyrophillite was improved.
27. 分析和讨论了现场取芯与室内试块的强度,为推广采用新型固化剂奠定一定的基础,对粉喷桩设计和施工亦有一定的参考价值。
In addition, analysis is made on mixing and curing condition of reinforcing soil, which will be helpful for popularizing proposed new solidification and for the design and construction of DJM pile.
28. 介绍了橡胶叶轮模具三块式抽芯结构。
The three block self plugging structure of rubber impeller die is introduced.
29. 介绍了橡胶叶轮模具三块式抽芯结构。
The three block self plugging structure of rubber impeller die is introduced.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
