中心距用英语怎么说,中心距的英文翻译


词语导航

基本信息

词语:中心距

繁体:中心距

拼音:zhōng xīn jù

英语翻译

【计】 center to center spacing

分词翻译

中心的英语翻译:

centrality; centre; centricity; core; heart; hub; kernel
【医】 center; centra; centre; centro-; centrum; core

距的英语翻译:

be apart from; distance
【医】 calcar; calcaria

翻译例句

1. 通过调整滚轮的中心距,适用不同直径筒体。

Applicable for all cylinder of different diameter by adjusting the trolley center distance.

2. 排污孔中心距墙。

Roughing in center to wall.

3. 研究了定中心距、定啮合角变速比齿轮的啮合原理。

The conjugate principle of the variable ratio gear with constant center distance and constant contact Angle has been analysed.

4. 增大中心距。

Increase the center distance.

5. 此种方法亦可应用于其它一些机械零件孔中心距的测量。

This method can be applied to the measuring of centre distance of holes in other machine elements.

6. 本文讨论了法向圆弧齿轮在有中心距偏差及切深偏差时的啮合。

This paper deals with the engagement of gears with circular arc profile in normal plane at the presence of errors on center distance and depth of cut.

7. 阐述了双螺杆中心距a对主机、传动系统设计及系列化的重要性。

Importance of centre distance (a) between twin screws on the design of extruders, driving systems and their ser...

8. 模座:采用西德技术(镶入式),保证拉伸的中心距,减少断线机率。

Dies seat: Adopt West Germany technology (Inlay type), assure the drawing center distance to avoid the wire breakage.

9. 并通过正交试验对后区牵伸倍数、罗拉中心距和粗纱捻系数进行了优选。

Through orthogonal experiment, parameter of back zone draft multiple, roller center distance and roving twist factor are selected.

10. 形状和孔、槽的分布形式不同,其中心距定位尺寸的标注形式也不一样。

Since the basic shape of the board and the distribution of holes and grooves are different, the formats of location dimensions for dimensioning center-to-center spacing are also different.

11. 设计双线或多线隧道时,其相邻隧边合理中心距的研究是个相当重要的课题。

The proper distance between adjacent tunnels is an important question in the design of double-line tunnels especially in multiple-line tunnels.

12. 在一定条件下,这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。

Under certain conditions, this reduction of the center distance will lead to additional radial pressures between two meshing gears in the gearing.

13. 在一定条件下,这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。

In certain conditions, the center distance reduction will cause additional radial pressure of two mating gears.

14. 确定了非圆齿轮的基本参数:基础圆半径、偏心率、变形距和中心距比例系数。

The basic parameters of non-circular gear are determined, such as primary circle, eccentricity ratio, eccentricity throw and proportional coefficient of center distance.

15. 基于齿轮的范成加工原理,提出了一种变速比齿扇齿廓的定中心距齿轮建模法。wWw.wentiyi.com

Based on the principle of gear machining generating method, a modeling method - variable center distance gear modeling method for variable ratio gear sector profile is put forward.

16. 以带长、带宽、中心距作为目标函数,对齿形带结构参数的优化设计进行了探讨。

The optimum design of synchronous belts with structure parameters is explored in this paper, taking the belt length, width and centre distance as objective functions.

17. 为了获得最佳磨损寿命,2个链轮间的中心距通常应是链条节距的30至50倍。

For optimum wear life, centre distance between two sprockets should normally be within the range 30 to 50 times the chain pitch.

18. 利用随机模拟方法给出了可调中心距齿轮链空程在各种情况下的模拟曲线及计算结果。

In this paper, the simulate curve and result for the backlash Center Adjustable Gear train in various cases are given by the random simulate method.

19. 双圆弧齿轮减速器中心距和传动比分配的确定,直接影响减速器承载能力、重量和体积。

The selection of center distance and gear ratio distribution for a reducer with double-circular-arc gear will have a direct effect on its size, weight and loading capacity.

20. 本文对链传动运动学特性进行了分析,给出了从动链轮速度、加速度与中心距之间的关系。

The kinematic characteristics of chain drives are analyzed, the relationships between the speed and acceleration of the driven sprocket and the centre distance are given.

21. 通过优化为楔横轧机偏心中心距调整机构及相关机构的设计提供了良好的数据参考、设计依据。

All of this got data reference and design basis for eccentric mechanism for adjusting the center distance and others.

22. 合理的节曲线设计是可用于低速大扭矩液压马达的变中心距非圆行星齿轮机构正常工作的关键。

Appropriate pitch curve designing is a key of regularly working for non-circular planetary gear mechanism with variable center distance which can be used in low speed high torque hydraulic motor.

23. 刀齿部分为矩形、通过调整两切面刀的中心距,不需更换切刀,就能切出多种不同宽度的面条。

The knife tooth part is the rectangle, through adjusts two cutter surface knife"s center distance, cannot replace the cutter, can cut many kinds of different widths on the noodles.

24. 则最好的松紧程度为:链条的中部在提起或压下的时候,两链轮中心距的约为2% - 3%。

The best tightness is: in the middle of the chain lift or press down, the center distance of the two sprocket is about 2%-3%.

25. 它不仅能测量尺寸、形状误差,还可以测量垂直度、锥度、孔中心距、平行度等相互位置误差。

It can be used in measuring not only dimensional and shape errors, but also relative positions as in the cases of perpendicularity, parallelness, conicity, distance between holes, etc.

26. 通过本文工作,得出中心距误差对准端面双圆弧齿轮敏感性小于其对法面双圆弧齿轮的敏感性。

Through this work, the paper conclusion has confirmed the theory which sensitivity of center-distance tolerance on the Quasi-transverse-circular-arc gear less than normal circular gear.

27. 船舶在波浪中航行时,船体总弯曲变形会使沿船体纵向布置齿轮机构的轴承支座中心距产生缩减。

When sailing in waves, ship hull total bending deformation will reduce the center distance of gear backing radially arranged in ship hull.

28. 本文对主动轮的中心距按照正常、向左和向右三种情况下进行装配,研究其对微车后桥振动的影响。

In this paper, the center distance of driving gear is assembled according to the normal, left and right, then research its effect to micro-vehicle rear axle vibration.

29. 本文对主动轮的中心距按照正常、向左和向右三种情况下进行装配,研究其对微车后桥振动的影响。

In this paper, the center distance of driving gear is assembled according to the normal, left and right, then research its effect to micro-vehicle rear axle vibration.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!