压力铸造用英语怎么说,压力铸造的英文翻译


词语导航

基本信息

词语:压力铸造

繁体:壓力鑄造

拼音:yā lì zhù zào

英语翻译

【机】 pressure casting; pressure csating

分词翻译

压力的英语翻译:

press; tension; compressive stress; pinch; stress; tax
【化】 pressure
【医】 baro-

铸造的英语翻译:

casting; foundry; mint
【计】 founding

翻译例句

1. 采用糊态挤压成型镁合金避免了压力铸造的缺点。

By using mushy extrusion molding for magnesium alloy, the disadvantage of pressure casting is avoided.

2. 这是因为压力铸造正板栅抗腐蚀性能较差造成的。

The resistance to corrosion is comparatively poor for pressure-casting grid.

3. 论述了金属液作为压力铸造压力传递介质的实际情况;

The real circumstance of liquid metal as the pressure transfering agent during pressure casting was introduced.

4. 浸渗的方法主要有压力铸造、挤压铸造及气压浸渗铸造。

Infiltration includes die casting, intrusion casting, gas infiltration casting and so on.

5. 压力铸造是一种生产效率高,产品质量高、精度高的金属成型铸造方法。

Die casting is a metal forming method with high production efficiency, high production quality and high precision.

6. 压力铸造机包括金属流动系统,而该系统还处于压力铝合金铸造过程中使用。

A pressure casting machine includes the metal flow system, while the system also is used in a process for pressure casting of aluminium alloys.

7. 叙述浮动端面密封环压力铸造的三种压射套结构、材料和表面处理工艺及其应用范围。

Three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded.

8. 综述了压力铸造和重力铸造两大类抗蠕变镁合金的研究开发现状及其在汽车上的应用状况。

The current research and application status of the creep resistant magnesium alloys used for high pressure die casting and for gravity casting in automobile were reviewed.

9. REIS机器人公司提供压力铸造和重力铸造全面自动化概念,整个铸造自动化单元由一家提供。

REIS ROBOTICS offers the die-caster a whole automation concept where the complete automation of the casting cell can be achieved by one manufacturer.

10. 试验和生产结果表明,对于锥形起重电机定子壳的生产,液态金属模锻工艺比压力铸造工艺更合理。

It has been proved by the results of experiment and production that molten metal forging is more advanced and reasonable than pressure casting for the production of crane motor stator shell.

11. 箱体类主要部件(立轴箱、分动箱、卷扬机等)材质采用压力铸造高强度铝基合金替换原有普通钢材;

Box main components (vertical axle box, transfer case, hoist, etc. ) adopts the pressure casting of high strength aluminum alloy to replace the original ordinary steel;

12. 压力铸造作为一种高效率、短周期、低成本的材料精确成形方法,在汽车工业中得到越来越广泛的应用。

High Pressure Die Casting which is a net shape manufacturing process with high efficiency, short production cycle, and low...

13. 对颗粒增强铝基复合材料进行压力铸造工艺加工,是解决颗粒增强铝基复合材料近终成形的一种新方法。

The new moulding technics idea of particulates reinforced aluminum matrix composites is to apply die-casting into this kind of material.

14. 金属流动系统,在用压力铸造铸造机使用铝合金,是由一个模具或模具装配组件,为这台机器,它定义了一个死腔。

A metal flow system, for use in casting aluminium alloy using a pressure casting machine, is provided by a component of a die or mould assembly, for the machine, which defines a die cavity.

15. 表面安装式关门装置应是全齿条的和小齿轮型的,带压力铸造合金的外壳,从门表面突出不超过53毫米(2 1/8英寸)。

Surface mounted closers shall be full rack and pinion type, with pressure cast alloy shell, with no more than 53 mm (2 1/8") projection from the door surface."

16. 灰口铁--一种铁碳和硅的合金;易于铸造;在铸态下具有很好的压力紧固性。

Gray iron--an alloy of iron carbon and silicon ; easily cast; good pressure tightness in the as-castcondition.

17. 轮框是在一个有125度高温和6个气压压力下在真空焗炉铸造的。

The wheels are cured in an Autoclave at 125 degrees C and 6 bar of pressure.

18. 对不同保压压力下真空差压铸造试样致密度进行分析,探讨真空差压铸造工艺的凝固补缩特性,建立凝固补缩过程的数学模型。

Through analyzing the density of vacuum counter-pressure casting samples under different keeping pressures, their solidification feeding behavior and mathematical model were discussed.WwW.weNtiYi.com

19. 差压铸造工艺方法的核心是差压充型,压力下凝固。

The technological core of the differential pressure casting is the filling model under differential pressure and the solidification under pressure.

20. 从合金液的流动和压力损失的角度,研究了两种挤压铸造方式对ZA43合金力学性能的影响。

The effects of two patterns of squeeze casting on mechanical properties of ZA43 alloy were investigated through the analysis of alloy liquid flow and pressure loss.

21. 风机部件的创造采用冷腔室压力拉模铸造工艺。

The fan component is produced using cold chamber pressure die casting process.

22. 利用消失模铸造压力凝固技术增强AZ91D镁合金补缩能力。

Feeding capacity of AZ91D magnesium alloy is enhanced by using pressure solidification in lost foam casting(LFC).

23. 指出了舵面间接正向挤压铸造工艺特点,分析了压力的变化和液流的充填性对舵面成形性的影响。

Technology characteristics have been pointed out. Effects of pressure variety and flow fillability on rudder formation have been analysed.

24. 听说铸造是用压力来转变金属外形的主要减农方式之一。

It is said that forging is an important process for changing the shape of metals by pressure.

25. 机身整体铸造,机器压力强大,运转平稳,坚固耐用。

The machine body is cast on the whole, and the machine enjoys powerful pressure, stable operation, firm and durable.

26. 测定了不同铸造压力下adc12 Z压铸件密度、孔洞面积百分比、孔洞平均直径及力学性能,研究了铸造压力对ADC12 Z压铸件孔洞和力学性能影响。

It was measured that the density, area percentage and average diameter of porosity and mechanical properties of ADC12Z die castings under the different casting pressures.

27. 机理分析法建立了铸造罐内压力变化的数学模型,分析了各参数对铸造罐内压力变化的影响。

A mathematic model of the pressure changes in the casting pot is established by the analytical method, and the influence of each parameters on the pressure changes in the casting pot is analyzed.

28. 对于铸造、锻造和压力加工,每一个要生产的具体工件形状,即使是一个零件,几乎都要花费高额的加工费用。

For casting, forging and machining pressure, every production of a specific shape of the workpiece, even a spare parts, almost have to spend the high cost of processing.

29. 试验研究了浇注后型腔压力对消失模铸造的铝件表面状态、力学性能影响的趋势。

Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated.

30. 该系统会加压铸造,使压力稳定,然后监测压力衰减率。

The system pressurizes the casting, allows the pressure to stabilize and then monitors the rate of pressure decay.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!