槽值用英语怎么说,槽值的英文翻译


词语导航

基本信息

词语:槽值

繁体:槽值

拼音:cáo zhí

英语翻译

【计】 slot value

分词翻译

槽的英语翻译:

chamfer; gutter
【计】 slot
【化】 channel
【医】 alvei; alveus; crib; gutter; slot; socket; tank; trough

值的英语翻译:

cost; value; happen to; on duty
【医】 number; titer; titre; value

翻译例句

1. 其原因是如果您加载的是单一值,那么您就会希望它位于寄存器的首选槽。

The reason for this is that if you are loading a single value, you probably want it in the preferred slot of the register.

2. 在这些情况下,所使用的值是在寄存器的首选槽中的那个。wWw.WENTIYi.coM

In these cases, the value that is used is the one in the register"s preferred slot.

3. 在重写启用活对象设置保护和处理之前保留槽的原始值。

Preserving a slot"s original value before overwriting enables the live object set to be preserved and processed.

4. 所以,只要值位于寄存器的首选槽之内,分支就会正常发生。

Therefore, the branch will occur appropriately, as long as the value is in the preferred slot of the register.

5. 现在这一类型的值可以通过内建的函数new来分配,这将返回一个指针,指向一块内存单元,其所占内存槽初始化为零。

Values of this type can now be allocated using the built-in function new, which returns a pointer to the value in memory with all slots initialized to the zero value.

6. 因为AIXTCPRTO的最大值(tmax)是64秒,所以这个值足够大,可以确保在一个槽位中所有的重新传输计时器同时计时到期,而不需要等到后继的周期。

Since the maximum value (tmax) for the AIX TCP RTO is 64 seconds, this is large enough to ensure that all retransmission timers in a slot expire at the same time and not in the subsequent cycles.

7. 在铝电解槽阳极换块周期内连续测定阳极组的电流分布值。并采用电阻温度系数去修正测定值。

The current distribution value of anode group is continuously detected during the period of changing anode and the resistance-temperature coefficient is adopted to adjust the value.

8. 本文分析了在应用V型槽确定基准灵敏度情况下,应注意K值选择和端角反射对检测结果的影响。

The paper analyzes the regarding of K value choice when applying type V groove to determine sensitivity, and the influence of block corner reflection on detection result.

9. 通过有限单元法计算和优化设计,确定锯片齿形前角、后角、楔角及槽底圆弧半径合理值的原则及其参考值。

Principles of reasonable values and reference data of saw tooth"s rake, relief, wedge angles and radius of bottom arc can be determined through finite element method of calculation and optimum design.

10. 对用循环编程和用刀补编程并设定刀补值实现挖槽加工进行了论述,对实际生产有一定的指导意义。

The article had expounded chamfer machining by cycle programming and sword programming setting out tool offset velative, and it has specified direction sens to practice.

11. 槽底局部加厚与温度变化的作用均不能忽略不计,否则,内力计算成果值会偏于不安全。

Therefore the effects of local thickening of the flume bottom and temperature variation cannot be neglected, otherwise the calculation results of internal forces will be of unsafety.

12. 技术上曾经的失误在于,因疏忽导致了不合理的振荡槽路电容等价并联低值冷却水路水电阻,形成异常功率分流附加损耗问题。

The technical failure lies in ignoring the surge slot capacitor parallel connection with low value water cooling electric resistance, and induce abnormal power diffluence wasting.

13. 结果在正中颌位大力咬合时,线性总义齿修复组颞肌前束肌电值高于解剖式总义齿修复组,尤以牙槽嵴吸收严重的患者最为明显(P

Results The peak value of anterior temporal muscle of linear occlusal dentures with severe resorption of residual ridge was higher than that of anatomic occlusal dentures ( P

14. 结果:发现杵臼附着式固位的种植赝复体在行使功能时其腭部、牙槽骨、种植体周围骨界面的应力值均远高于杆卡附着式固位的种植赝复体。

Results: the stress values of the ball attachment in the palate area, alveolar bone and implant bone interface were much higher than that of the bar attachment.

15. 提出了采用加热空气介质的高温空气槽测定材料热变形温度(HDT)的方法,通过几种高分子材料在油浴中及高温空气槽中测定HD T值的比较。

The way of heating air by using high temperature-air container was designed for the measurement of the heat deflection temperature (HDT) of polymer materials.

16. 截止阀的柔性元件的径向变形值可以调节,保证柔性螺纹套的环槽与螺杆上的螺纹的接合深度。

Radial distortion of the flexible component in the stop valve can be adjusted so as to ensure the joint depth between flexible screw thread trepanning circular groove and screw thread on the screw.

17. 冲绳海槽东槽底平原沉积物含有较多的火山物质,磁学特征与其它沉积环境有明显差异,各磁性参数特征值也明显较强。

According of east abyssal plain of the Okinawa Trough with some volcanic materials, it show strong magnetic characteristics different from other sediment environments.

18. 比较两个航次的观测结果,我们发现,北部低槽和两个重力势高值区变化明显。

Comparing the observational results of the two cruises, it is found that the northern trough and two high value areas of dynamic potential change obviously.

19. 当线程从多个应用程序域中访问同一个字段或槽时,会在每个应用程序域中维护一个单独的值。

When a thread accesses the same field or slot from multiple application domains, a separate value is maintained in each application domain.

20. 结果表明,钢体上开工艺槽导致焊后残余应力增加,对接头强度不利;钎缝厚度存在一最佳值。

The result showed that notch was disadvantageous to the strength of joints, and the optimal value of filler metal thickness existed.

21. 较少的生产步骤和较短的处理时间有助于提高工厂的产能。槽液的浓度可以通过PH值来控制,并通过滴定和分光光度法来进行检测。

Fwewer process steps and shorter treatment times increase plant productivity. The bath concentration is controlled via the PHby titration and spectrophotometric measurements.

22. 实验结果表明,理论预测值与实测值吻合得较好,为进一步设计断屑槽型奠定了基础。

The results show that the theoretical predictions agree well with the experimental results. The work is useful to design model of breaking chip.

23. 通过三维边界元计算分析表明,切槽宽度越大,无量纲应力强度因子的标定值就越大;

Our 3D BEM(Boundary Element Method) calculation shows that the larger the notch width is, the bigger the error makes for the dimensionless stress intensity factor.

24. 通过三维边界元计算分析表明,切槽宽度越大,无量纲应力强度因子的标定值就越大;

Our 3D BEM(Boundary Element Method) calculation shows that the larger the notch width is, the bigger the error makes for the dimensionless stress intensity factor.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!