疲劳断裂用英语怎么说,疲劳断裂的英文翻译


词语导航

基本信息

词语:疲劳断裂

繁体:疲勞斷裂

拼音:pí láo duàn liè

英语翻译

【化】 fatigue crack; fatigue failure; fatigue fracture

相关词条

1.fatiguefracture  2.tiguefailure  3.fatiguefailure  4.fatiguebreak  5.endurancefailure  6.fatiguebreakdown  

分词翻译

疲劳的英语翻译:

fatigue; prostration; tire; tiredness; wear out; weariness
【化】 fatigue
【医】 defatigation; fatigue

断裂的英语翻译:

part; rupture
【计】 break-away; breakout
【化】 breakage; cracking; failure breaking; fracture
【医】 fragmentation

翻译例句

1. 这样活塞杆就会产生疲劳断裂。

This will result in the fatigue fracture of the piston rod.

2. 所有的固体材料都会遭受疲劳断裂。

All solid materials are known to be subject to fatigue.

3. 然而它的主要失效形式是疲劳断裂。

But the main failure state is fatigue flaw.

4. 结果表明:齿轮的开裂属于疲劳断裂。

The result shows that the cracking of the gear is fatigue cracking.

5. 结果表明,该弹簧断裂为腐蚀疲劳断裂。

The result indicated that the springs fail because of corrosion fatigue fracture.

6. 结果表明,其断裂形式为弯曲疲劳断裂。

The results indicated that the fracture mode is the fatigue failure.

7. 结果表明,传动副轴的断裂是疲劳断裂。

The result indicates that the fracture of the drive countershaft is fatigue fracture.

8. 建立和描述了疲劳断裂能与寿命的关系。

The relationship between absorbed failure energy and fatigue life is established and analyzed.

9. 断裂性质属疲劳断裂。

The fracture was a fatigue process.

10. 结果表明:高压电容引脚断裂性质为疲劳断裂。

The results show that the fracture mode of the pins is fatigue fracture.

11. 叶片表面的腐蚀坑是其疲劳断裂的另一促进因素。

The corrosion pits on the blade surface contributed to such failure as an additive factor.

12. 焊接造成的内部气孔使环形锯丝在该处产生疲劳断裂。

The holes in welding area mainly cause the fatigued wire to break.

13. 因而,它是一种化害为利,利用疲劳断裂下料的机械。

So it"s a kind of machine which take advantage of fatigue-fracture.

14. 几种合金丝在疲劳断裂前,回复率一直保持为100%。

The recovery rates of all wires keep up 100% before fatigue rupture.

15. 本文着重对沥青混合料与沥青路面的疲劳断裂进行分析。

This article focuses on the analysis of asphalt mixture and asphalt pavement fatigue fracture.

16. 疲劳断裂特征为疲劳条纹、韧窝及类似准解理状形貌特征。

The fatigue fracture characteristics were fatigue striation, ductile microvoid, and quasi-cleavage-like fracture characteristic.

17. 结果表明,拉伸断裂和疲劳断裂位置和方式是完全不同的。

The results show that the site and mode of fracture under tension and fatigue are completely different.

18. 结果表明,连杆属于疲劳断裂,断裂失效主要由折叠裂纹引起。

The results show that the fatigue fracture is the main cause of fracture failure for the connecting rod.

19. 试验数据表明,激光冲击能有效地提高航空铝合金抗疲劳断裂的性能。

The test data show that laser shocking can improve effectively the properties of aviation aluminium alloys against fatigue fracture.

20. 回转窑运行中由于轴线偏移,支承载荷分配不均导致托轮轴疲劳断裂。

Axis line deflection and asymmetric load distribution of the rotary kiln induce the cracking of supporting shaft frequently.

21. 由此可以断定油管断口属疲劳断口,油管的断裂失效性质是疲劳断裂。

Therefore it can be judged that the fractures in the tubing are fatigue fractures and the tubing failure is caused by fatigue fracture.

22. 疲劳断裂是气门弹簧失效的主要模式,它是疲劳裂纹萌生及其扩展的结果。

The primary failure model is fatigue fracture that is always resulted by the crack initiation and propagation.WWW.WeNTiYI.coM

23. 在应力控制下,分析带有涂层的LY 12CZ铝合金构件疲劳断裂方式。

The fatigue fracture mode of LY12CZ aluminum alloy specimen with coating is investigated under stress control condition.

24. 又算出了这五种形状角焊缝趾端部和焊肉中央处的表面裂纹疲劳断裂的寿命。

The fatigue life of the surface cracks of the weld toe and the central part of the welding bead are calculated.

25. 从防止带传动打滑失效和疲劳断裂失效出发,指出现有带传动设计准则之不足。

The deficiency of present belt drives design criteria is pointed out to get a start in sliding failure and fatigue fracture failure.

26. 系统阐述利用有限元法对机械结构零部件进行疲劳断裂分析的相关理论和方法。

The relative theory and methods on the analysis of the fatigue and fracture of mechanical components by means of the finite element method are discussed.

27. 在低循环应力时,真空环境中的疲劳断裂次数可比室温大气环境中的高近4倍。

Under lower cyclic stresses, the fatigue cycles to failure in vacuum is increased approximately 4 times than in air.

28. 目的:测定股骨交锁髓内钉锁钉的生物力学变化,分析易发生疲劳断裂的锁钉位点。

Objective: To analyze the biomechanical changes of interlocking nails and the position of nail where fatigue fragmentation happens easily.

29. 钢丝间的微动磨损以及由此引起的钢丝的疲劳断裂是提升钢丝绳失效的主要原因之一。

Fretting wear and its induced fatigue and fracture of wires was one of the major failure modes of the hoisting ropes.

30. 结果表明,该连杆螺栓杆部与头部的过渡圆弧处容易产生应力集中,造成其疲劳断裂。

The comparing result showed that the arc transition area between rod and head was easy to produce stress concentration which results in fatigue failure.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!