
词语导航
基本信息
词语:部件检验
繁体:部件檢驗
拼音:bù jiàn jiǎn yàn
英语翻译
【计】 unit check; unit checking
分词翻译
部件的英语翻译:
assembly; components; parts; subassembly; unit
【计】 E; packing unit; U
【化】 element
【经】 part; parts
检验的英语翻译:
check up; examine; inspect; proof; prove
【计】 CH; checkout; V; verify; verify check; verifying
【化】 checking; examine
【医】 analysis; coroner"s inquest; docimasia
【经】 inspection; monitoring; proof; test; verification; verify
翻译例句
1. 负责模具制作过程中的模具零部件检验,分析8D报告和尺寸报告。
Responsible for dimension checking, inspection on in-process parts, come out with 8D & dimension report;
2. 负责零部件检验记录的收集、汇总和保管,并定期对零部件质量状况进行分析,提出改进建议;完成部门安排的其他工作。
Collect and keep the relevant records during inspection, analysis the quality status periodically and recommend improvements; execute other works assigned by department.
3. 按照流程,需要检验的部件或部件区域的标识号。
Identification of components or areas within a component requiring inspection in accordance with the procedure.
4. 检验结果页面是否包含具有小部件名称的成功信息。
Verify that the resulting page contains a success message with the widget"s name.wWw.wentIYi.COM
5. 日前,青岛检验检疫局对一批来自日本的玩偶木制配件实施检验时,发现部分部件的可溶性铅和可溶性铬均超出国标限量。
Some wooden components of Japanese dolls were found to contain more dissolute lead and chrome than national standards, according to inspection and quarantine authorities of Qingdao, Shandong.
6. 你们应将所提供的零部件运到我们的仓厍,所提供的装配工具需在我们这儿重新检验,以确保其符合标准。
You shall deliver the supplied parts and components to our warehouse, and the supplied assembly tools shall be reinspected at this end to ensure that they correspond to standards.
7. 对所属的产品和部件,策划和执行分析,检验,设计,实验以及整合。
Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of the assigned product or component.
8. 零部件成品检验及整车检验。组织检验员按检验标准对成品及整车进行检验;
Finished products inspection, assign the inspectors to test the finished products and trailers based on the inspection standards and methods.
9. 工厂有对进仓原物料、配件和部件质量检验的程序。
Factory has procedures for quality inspection on incoming raw materials, accessories and components.
10. 那些新的机器部件正在接受检验。
The inspection is being accepted to those new machine parts.
11. 硝酸酒精腐蚀检验:通过使用一系列的酸性或中性溶液检查磨削后零部件表面是否有裂痕或磨削烧伤。
NITAL ETCH : Process of checking surfaces of ground product for cracks or burns by use of a series of acids and neutralizers.
12. 有多各面的部件,每一侧都要当做一个单独的平面来检验。
On parts with multiple sides, each side must be considered as a separate plane to be inspected.
13. 汽车后桥是汽车的关键部件之,据统计,有20%的事故是由于后桥造成的,所以后桥在出厂前要进行严格的质量检验。
The Rear Bridge is one of the key parts of the automobile, according as statistic, 20% accidents result from Rear Bridge. So it is necessary to inspect it strictly before Rear Bridge leave factory.
14. 对设备形成的重要过程、关键部件等质量控制进行见证、检验和审核。
To witness, inspect and audit for the important procedure of the plant come into being and the quality control for the key parts.
15. 本试具用以检验防止人体触及危险部件。
This probe is intended to verify the protection of persons against access to hazardous parts.
16. 通过总装的虚拟化样机设计,检验了零部件的结构设计中是否存在干涉,零件间的定位和装配关系是否合理,总体结构是否美观。
After the virtual reassemble, the part is intervene whether or not, the position and reassembled relation is reasonable or not and the overall structure is looked beautiful or not.
17. 熟悉ISO质量体系,会看模具图纸检验,熟悉零部件标准,能操作2.5D投影仪,三次元,和各种量具;具有良好的沟通协调能力。
Familiar with ISO quality system and tooling standard components, able to read tooling drawing and operate 2.5d projector, CMM, each type of measuring instruments; good coordination ability.
18. 实际上,交货前对所有的设备与部件进行检验是我们通常的做法。
Actually, it is our usual practice to inspect all equipment and parts before shipment.
19. 棉纺织的纤维检验是确定纺纱机工艺部件规格、结构以及纺纱工艺设计的依据,对成纱的产品质量影响较大。
The proof test of cotton fibre is the foundation for determining the specifications and the structure of spinning machine"s components, and is also the base of spin technics designing.
20. 承包人应进行检验,并稽查建设工厂所需的一切设备,机械和材料,其中包括各种备用零部件。
The Contractor shall perform the inspection and examination of all equipment, machining and materials including spare parts required for the construction of the plant.
21. 零部件外观检验的结果如何?
How about the components for visual check?
22. 部件的识别(一)由一个自动生成的校验,在法律上相关软件,已宣布固定在型式检验。
Part (a) of the identification consists of an automatically generated checksum over the legally relevant software that has been declared fixed at type examination.
23. 采集机械磨损表面形貌轮廓曲线来分析器械部件的使用状态是检验检测工作的常用方法。
By collecting topography profile of worn surface, it is common method that using status of appliance parts is analyzed.
24. 在物体识别阶段,将景体与模型的匹配分成三部分进行,即扫描部件、图的匹配部件及匹配检验部件。
In object recognition stage, the approach divides the matching between scene and model into three parts, i. e. the Scanner, the Graph matcher and the Matching Verifier.
25. 整机的零部件加工、装配、调试都根据标准进行检验。
Parts processing, assembly, testing are based on standard test.
26. 汽车离合器从动盘总成扭转性能检验机是汽车零部件试验的重要试验设备。
A new torsion testing machine for driven plates of automobile clutch, which is important testing equipment in automobile component industry, has been presented in this paper.
27. 汽车离合器从动盘总成扭转性能检验机是汽车零部件试验的重要试验设备。
A new torsion testing machine for driven plates of automobile clutch, which is important testing equipment in automobile component industry, has been presented in this paper.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
