下料用英语怎么说，下料的英文翻译

词语导航

基本信息

词语：下料

繁体：下料

拼音：xià liào

英语翻译

【机】 lay off; laying-off

分词翻译

下的英语翻译：

below; descend; down; give birth to; give in; go to; leave off; lower; next
take
【医】 cata-; hyp-; infra-; kat-; sub-

料的英语翻译：

expect; feed; material; stuff
【化】 filter material

翻译例句

1. 精密剪切是重要的下料方法。

Accurate shear is an important unloading method.

2. 于是我开始按打印的材料清单开始下料。

So I started cutting the material per the material list on the print.

3. 配备全自动上下料装置，操作方便快捷。

Provide full auto and unload apparatus, handiness and immediacy.

4. 钢筋在加工棚内严格按设计图纸下料制作。

Reinforcement shall be made strictly in process shed according to the drawing.

5. 采用可调性强、精密度高的压式下料系统。

Adopt adjustability of strong, precision high pressure type material feeding system.

6. 当下料或废料从模具上掉下时要求使用垫脚。

Parallels are required when blanks or scrap are discharged through the die shoe.

7. 矩形件排样问题，是二维下料问题的一个分支。

The rectangular cutting problem is a branch of the two-dimensional cutting problems.

8. 但是其折流板和定距管下料尺寸的计算比较复杂。

But the calculation of the baiting size of the baffle plate and spacer pipe is complex.

9. 公司现有加工中心、数控铣床、数控下料等设备。

Company"s existing processing center, CNC milling machines, CNC cutting and other equipment.

10. 钢绞线下料时，留足端部张拉位置所必须的长度。

The preparation materials of steel strands, the enough length by end part tensioning position shall be required.

11. 在国民经济生产中，存在着大量的切割下料问题。

In national economical production, there have a lot of cutting stock problems.

12. 新型下料机是利用变频振动实现低应力精密下料的。

New type of precision cropping machine utilizes variant frequency vibration to crop bar precisely with low stress.

13. 本机采用气、油压并行设计，空气压力足，下料稳定。

Special design of air and hydraulic, enough air pressure, make the machine steady to use.

14. 采用振动盘自动上料，机器自动下料，节约人工成本。

The vibration plate of automatic feeding. mechanical automatic blanking, saving labor costs.

15. 因而，它是一种化害为利，利用疲劳断裂下料的机械。

So it"s a kind of machine which take advantage of fatigue-fracture.

16. 该机用于铝门窗角码下料，并可用于塑料型材的切割下料。

This machine applies to the baiting of casement profile for aluminum door and window.

17. 第三个阶段是裁剪分析阶段，即生成平面膜材的裁剪下料图。

The last one is cutting pattern analysis, which generated the number of membrane block and the cutting method.

18. “下料问题”在工程技术和工业生产中有着重要和广泛的应用。

The cutting stock problem possesses important and widespread application in the engineering techniques and the industrial production.WwW.WENTIYi.COM

19. 下料：指工件经过LASER切割或数控冲床冲裁的工艺过程。

Cutting: refers to the workpiece through the LASER cutting or CNC punch blanking process.

20. 本文通过实例建立套裁下料问题的数学模型并使用计算机对其求解。

Based on the example, sets up a mathematic mould for jacking blanking and solving it with computer.

21. 他采用预制好的袋子来进行包装，可以避免因制袋而影响下料的矛盾。

He adopted a good bag to carry out pre-packaged, avoid the bag while under the influence of material contradictions.

22. 为解决加工车间下料锯床卸料，提高生产效率，具有一定的实用价值。

To solve the problem of discharging material in sawing bed, to increase production efficiency, it has utility value.

23. 摆臂可以自动摆动，操作视线极佳，特别适用于对真皮的下料裁断。癩。

Thee swing arm can swing automatically. best operation line of sight, especially suitable for laying-off and cutting of true skin.

24. 通过选择合适的板材尺寸，可以明显提高电机铁心用硅钢片的下料利用率。

Selection of reasonable dimensions of silicon sheet can significantly improve the material utilization of motor core.

25. 在此，结合实际工作经验，总结了几种数控火焰切割机的典型下料工艺方法。

This paper summarizes some typical programming methods of NC flame cutting machine based on practical work experience.

26. 在工业应用领域中存在大量的二维下料问题，其中应用最多的是矩形件下料问题。

Rectangular stock cutting is the most applied problem in two-dimensional stock cutting problems which are widely existed in industrial application field.

27. 为解决转炉下料溜管漏水问题，对原下料溜管结构进行了改造，取得了良好效果。

The slide pipe of raw material was reformed to solve the water leak, and good result got.

28. 为了实现板材下料的自动化，研制了一种具有自动套料及编程的板材下料数控系统。

In order to realize the automation of plate cutting, a plate cutting NC system with automatic positioning and programming is developed.

29. 自移灯杆自动上下料工作台，实现一人上料功能，极大节省人工，适合批量标准件生产。

Automatically to up and down the material platform, to realize one feeding function, Greatly save labor, Suitable for batch prodution of standard components.

30. 简体的长度、进气管和排气管的尺寸以及锥体和下料管是设计旋风分离器时要考虑的重点。

The focal points of designing cyclone separator were involved in cylinder length, dimension of inlet and outlet pipe, cone and filling tube.