有效电阻用英语怎么说，有效电阻的英文翻译

词语导航

基本信息

词语：有效电阻

繁体：有效電阻

拼音：yǒu xiào diàn zǔ

英语翻译

【计】 effective resistance

分词翻译

有效的英语翻译：

availability; be good for; efficiency; hold; hold true; in effect
【计】 AV; significance
【经】 be available; in force

电阻的英语翻译：

resistance
【计】 ohmic resistance; R
【化】 resistance
【医】 resistance

翻译例句

1. 有效电阻为源电阻和反馈(或分流)取样电阻的并联组合。

The effective resistance is the parallel combination of the source resistance and the feedback (or shunt) sensing resistance.

2. 这是一个简单有效的方法，外表电阻随空气相对湿度的增大而减少。

This is a simple and effective method, the appearance of resistance with the increase of air relative humidity and reduce.

3. 电阻焊质量在线评估的一种有效方法是对焊接过程中的重要物理量进行实时采集处理和显示。

An effective way for online quality evaluation of resistance welding is to acquire important data and display them as dynamic curves during welding.

4. 文中设计了一种模糊在线检测器以检测电阻的瞬时值，为改善直接转矩伺服系统的低速性能找到了一种有效的方法。

This paper designs a fuzzy observer for measuring resistance value of induction motor and presents an effective method for improving the performance of the DTC servo system at low speeds.

5. 同时研究了引线及顶线的各项参数变化对天线的有效高度、增益、输入电抗、辐射电阻及静电容的影响。

The affection of parameter variation of down lead wires and top loading wires on effective height, radiation pattern, input reactance, radiation resistor and static capacitance is discussed.

6. 介绍了钳形接地电阻测试仪的测试原理，即在测量时必须要有一个供电流流过的有效的闭合回路。

It describes the measure principle of the clamp grounded resister tester, that is, a effective close loop for current flow is necessary when doing the test.

7. 这类在甚低温金属中没有电阻的征象有可能对于电子计较机颇有效处。

Thellos lack of resistance in very cold metals may become useful in electronic computers.

8. 本文介绍了一种较具适用性的有效数字的定义，并给出了伏安法测电阻时数据处理的合理结果。

One suitable definition of significant figure is introduced and the reasonable data treatment result in measuring resistance with voltmeter-ammeter method is obtained.

9. 采用P型栅压自举开关补偿技术，可以有效地克服采样管导通电阻变化引入的非线性失真，提高采样精度。

By compensating with P-type bootstrapped switch, this circuit can overcome nonlinear distortion, which is generally introduced by signal-dependent on-resistance, and improve sampling resolution.

10. 研究结果表明合理的过滤工艺可以有效地降低铝的电阻率。

It is shown that the resistivity of aluminum can be decreased effectively using reasonable filtration process.

11. 焊接过程动态参数图形的实时显示是三相次级整流电阻焊质量在线评估的一种有效方法。

Graphic display of DC spot welding dynamic process is an effective way for online welding quality control.

12. 本文分析了电位器接触电阻变化率(CRV)测量的难点，提出了一种行之有效的方法——准包络测量法。

This paper analyses the difficulty in potentiometers" Contact Resistance Variation (CRV) test, and introduces an effective test method-Qarsi-Envelope test method (QETM).

13. 该方法不受电网平衡情况和接地电阻大小的影响，对复杂的间歇性电弧接地故障同样有效。

It is immune from the unbalanced status of network and the values of earthed resistance. To the complicated intermittent arc-earth fault, the proposed method also works well.

14. 腐蚀监测技术除定点测厚之外，电化学测量方法、电阻探针和电感探针法均是行之有效的方法。

In addition to the positioned thickness measurement, the electro-chemical measurement, resistance probe and inductance probe techniques were also the effective methods in corrosion monitoring.

15. 自然电位测井是油层水淹后能够有效识别地层混合液电阻率信息的测井方法。

SP logging is one of logging methods which can effectively distinguish resistivity of mixed liquid in formation after oil layer being water flooding.

16. 该模型将微带线的有效阻抗作为匹配负载电阻，然后按适当的比例分布到端接面的网格中。

The model uses the effective impedance of the microstrip line as the value of matched resistive load and assign it into the RL mesh region in a proper proportion.

17. 这种接触结构体积小，能有效减小回路电阻，降低温升。

The contact structure has small volume, and is capable of effectively reducing circuit resistance and reducing temperature rise.

18. 异种金属的有效连接在高新技术领域具有实际意义，采用电阻点焊方法焊接稀有金属钨片和镍丝。

Effective welding of heterogeneity metals was of great pragmatic importance in modern hi-tech area. W plate and Ni thread were joined by using resistance spot-welding.

19. 因此，自适应判据有效提高了保护在定子绕组经过渡电阻单相接地情况下的灵敏度。

Thus, the proposed adaptive criterion can effectively improve the sensitivity of generator protection is improved while the single-phase of stator winding is grounded via transition resistance.

20. 选择合适的人工模型和已知的地质构造，进行了复电阻率探测实验，验证该方法的可行性和有效性。

Tests of complex resistivity exploration on appropriate artificial model and known geologic structure have been made. The results have verified the feasibility and effectiveness of this method.

21. 研究表明，等效串联电阻随着有效介质层厚度的降低而降低，直流电阻随着有效介质层数的增加而降低。

It is found that ESR decreases with decrease of the active dielectric layer thickness, and DC resistance decreases with the increases of active dielectric layer number.

22. 结果表明，电阻率法是城市地裂缝勘察最有效最简便的方法。

The results indicate that the resistivity method is the most valid and convenient means in ground fissure detection in city.

23. 在网络方程同伦的概念的基础上，给出了一种求解非线性电阻性网络的有效算法。

Based on the homotopy idea of network equation, an efficient algorithm for solving nonlinear resistive network is given in the paper.WWw.WeNTIYi.cOm

24. 结果表明，在安阳城市活断层调查中，电阻率层析成像测量方法是一种十分有效的勘探方法。

Practical results indicate that the electric resistivity tomography method is a feasible exploration method in the active fault survey in Anyang city.

25. 利用电阻应变仪测定了高应力弹簧各有效圈上所受的力；

The force on available coils of the spring was measured by means of straingage.

26. 试验探测表明：在城市活断层调查中，选用合适的电极装置类型，电阻率层析成像是一种有效的勘探方法。

Results show that the resistivity tomography survey is very effective for detection of active faults in urban area.

27. 沟槽线宽差异提供了制造沟槽电容器和沟道电阻器的有效方法。

The trench linewidth difference provides an efficient method for fabricating the trench capacitor and the trench resistor.

28. 沟槽线宽差异提供了制造沟槽电容器和沟道电阻器的有效方法。

The trench linewidth difference provides an efficient method for fabricating the trench capacitor and the trench resistor.