手工切割用英语怎么说,手工切割的英文翻译


词语导航

基本信息

词语:手工切割

繁体:手工切割

拼音:shǒu gōng qiē gē

英语翻译

【计】 manual cut

分词翻译

手工的英语翻译:

charge for a piece of handiwork; handiwork; handwork
【经】 handicraft

切割的英语翻译:

incise; incision

翻译例句

1. 主帆是由真正的篷布手工切割和缝制而成的。

The mainsails are hand-cut and sewn from real sailcloth.

2. 本文介绍一种全凭手工切割大口径锗单晶的切片方法。

The method to slice large diameter Ge crystal by hand is shown.

3. 我见过工人手工切割整块木头,如果用机器却只要四分之一的时间。

I"ve seen workers tearing down an entire block by hand, when some heavy machinery could do the work in a quarter of the time.

4. 现代切割技术有别于传统手工切割技术,它是基于现代计算机信息技术的。

Modern incision technology based on computer and information technology differs from traditional one.

5. 灵感源自“超大”潮流,夺目的戒指上以人手镶嵌一颗方形手工切割水晶。

Inspired by the "oversized" trend, this majestic ring is hand-set with a large, facetted, hand-cut crystal with a rectangular shape.

6. 小车切割机,简单说就是把手工气割具安装在小车和导轨上,用以替代手工切割。

The car cutting machine, the hand is simple said with gas cutting in the car and installation guide rail, to replace manual cutting.

7. 建筑结构是由预制的手工混凝土块基座和手工切割的木结构,按照序列及工业的顺序进行重复的操作而建成的。

The structure is built by a basement of precast handmade concrete pieces, and a wooden structure made out of handmade cut pieces, yet through a repetitive process, in series, industrial.

8. 经过多年的追求完美的工具,保多夫手工切割和手形,每个专家精密的化妆刷,让每一个女人“成了她自己的化妆师。”

After years of pursuing the perfect tools, Paula Dorf has hand-cut and hand-shaped each makeup brush for expert precision to allow every woman to "Become her own makeup artist."

9. 胶合板可以用桌上型锯进行手工切割,或使用数控路由器切割,将这些组件组装成一个结构框架不需要专业知识或特殊工具。

The plywood can be cut either by hand with tabletop saws, or with digitalized CNC routers, and these parts then assembled into a structural frame without the need for specialized knowledge or tools.

10. 塔外,26000块手工切割的玻璃板在阳光下闪闪发光;塔内,有高档的办公室,奢华的公寓。不久之后,阿尼玛酒店也会入驻于此。

000 hand-cut glass panels create a soaring glimmer in the sunshine, while inside there are plush offices, l uxurious apartments and soon, an Armani-branded hotel.

11. 塔外,26000块手工切割的玻璃板在阳光下闪闪发光;塔内,有高档的办公室,奢华的公寓。不久之后,阿尼玛酒店也会入驻于此。

000 hand-cut glass panels create a soaring glimmer in the sunshine, while inside there are plush offices, luxurious apartments and soon, an Armani-branded hotel.

12. 使用手工或机器装订机,接缝熨斗,粘结胶带或其他粘接材料测量,切割和安装地毯。

Measure, cut and install carpeting using hand or machine stitcher, seaming iron, bonding tape or other bonding materials.

13. 使用粘合剂,胶辊和手工工具,测量,切割和安装弹性地板覆盖物。

Measure, cut and install resilient floor covering using adhesive, rollers and other hand tools.

14. 金属元素中的每一个都是激光切割,并用手工折叠,然后剪切,并用螺栓固定到铝板上,最后被安装到该结构的外墙上。

Each of the metal elements is laser-cut and folded by hand, and then clipped and bolted onto aluminium sheets, which in turn are mounted onto the structure"s facade.

15. 操作机器或设备,或使用手工具切割,塑型,拼接,配合和接合橡胶材料,形成橡胶件或成品橡胶制品。

Operate machines or equipment or use hand tools to cut, shape, splice, fit and cement rubber materials to form rubber parts or finished rubber products.

16. 操作木工机器,例如电锯,开槽机,榫眼机和牛头刨床,并使用手工具切割,塑造和成型零部件。

Operate woodworking machines, such as power saws, jointers, mortisers and shapers, and use hand tools to cut, shape and form parts and components.

17. 手工操作或用电动工具或机器进行测量,切割,弯曲和穿透管道。

Measure, cut, bend and thread pipes using hand and power tools or machines.

18. 由于EPS泡沫板比较难于用手工制作,要记得将切割顶部和底部的次数增加到40—60次,尾部11次。

As EPS Foam is much harder to hand finish, always increase the number of cuts. 40-60 cuts on top and bottom and 11 cuts on the rail.

19. 采用传统的手工式切割与焊接不仅工艺粗糙,而且效率也低。

Traditionally, manual cutting and welding is rough in workmanship and low in efficiency.

20. 使用数控切管机切割带焊接坡口的相贯线时,手工编程效率低下。

Manual programming is inefficient when using CNC pipe cutting machine cuts intersection lines with welding groove.

21. 卓越的精密,使它能数字切割您最常用的材料,从纸张到聚碳酸酯的粘合剂,所有无需昂贵的或费时的手工。

With complete precision, the Digital Cutting Center cuts your most commonly used materials-from paper to polycarbonate to adhesives-all without costly dies or time-consuming handwork.

22. 跟MadeSolid的所有产品一样,这个皮袋从切割、造型、缝制到最后完成,每一步都是在艺术家彼得·麦克斯维尔的洛杉矶工作室手工完成的。wwW.WeNtIyi.cOM

"Like all Made Solid pieces, this one is cut, shaped, sewn and finished by hand in artist Peter Maxwell"s Los Angeles studio.

23. 跟MadeSolid的所有产品一样,这个皮袋从切割、造型、缝制到最后完成,每一步都是在艺术家彼得·麦克斯维尔的洛杉矶工作室手工完成的。

Likeall Made Solid pieces, this one is cut, shaped, sewn and finished by hand in artist Peter Maxwell "slos Angeles studio.

24. 切割,缝制和手工完成,并与天然面料制成的-通常感觉。

They are cut, sewn and finished by hand, and are made with natural fabrics — typically felt.

25. 这些应用领域需要专门的工具,尤其是在纤维类材质以及需要手工处理的材质上,而这些都可以被ZUND切割机轻易处理。

These applications require specialized tools and, in the case of fabrics, material-handling options that can easily be added to ZUND cutter configurations.

26. 采用线切割的方法制作涡轮叶片砂芯芯盒,用该芯盒手工起模制作叶片砂芯。

Sand core for the blade was made by hand drawing the pattern from core box. The way of core making is feasible on a medium scale production.

27. 我喜欢手工雕刻,在机械和技术方面,去开发出新的雕刻工具可以让我用双手轻松将金属,创造出一个精致干净的切割面。

I enjoy the mechanical and technical aspects of hand engraving, from building engraving tools to the feel of a graver effortlessly moving in my hand through the metal, creating a clean cut.

28. 我喜欢手工雕刻,在机械和技术方面,去开发出新的雕刻工具可以让我用双手轻松将金属,创造出一个精致干净的切割面。

I enjoy the mechanical and technical aspects of hand engraving, from building engraving tools to the feel of a graver effortlessly moving in my hand through the metal, creating a clean cut.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!