
词语导航
基本信息
词语:节点队列
繁体:節點隊列
拼音:jié diǎn duì liè
英语翻译
【计】 node queue
分词翻译
节点的英语翻译:
【计】 node; node point
【化】 nodal; nodal point; node
【医】 Gaussian points; nodal points
【经】 node
队列的英语翻译:
alignment
【计】 Q; queue; queueing
翻译例句
1. 首先创建一个称为results的xml节点队列。
First create a Queue of XML Nodes called results.
2. 随后创建Stats结构并作为动态数据访问节点队列,节点队列随后被赋值给一个XML结构。
You then create your Stats structure and simply drop in the Queue of Nodes as dynamic data that is then evaluated into an XML structure.
3. 这将新队列管理器的构建和部署任务分离,并支持节点的早期测试和验证。
This separates the build and deploy tasks for new queue managers and enables early testing and verification of nodes.
4. 标准化队列名称中的节点和节点分隔符。
Standardize on nodes and node separators in queue names.
5. 注意,配置文件将匹配一个名称为abc. . JKL的队列,因为它有三个节点,即使中间的节点没有字符。
Notice that the profile matches a queue named ABC.. JKL because it has three nodes, even though the middle node has no characters.
6. 停止备份节点上的队列管理器。
Stop the queue manager on the backup node.
7. 应用程序开发人员现在可以看到队列的饱和程度和运行作业的可用节点。
The application person can see how full the queues are and see available nodes for running jobs.
8. 在常见的用法中,“完整储存库”通常简称为“储存库”,而所有其他节点都是参与集群的队列管理器。
In common usage, "full repository" is often shortened to "repository" and all other nodes are simply queue managers participating in the cluster.
9. 作业在作业管理器上排队,然后注册节点定期检查队列中的可用作业。
Jobs are queued on the job manager and registered nodes periodically check for available jobs in the queue.
10. 运行队列管理器的节点还必须在内部磁盘上维持许多文件。
A node running a queue manager must also maintain a number of files on internal disks.
11. MQ集群将为所有入站事件提供负载平衡,JMS适配器和队列管理器将故障成对转移到可用集群的被动节点。
MQ clustering will provide load balancing for all of the inbound events, and the JMS adapter and queue manager will fail over as a pair to the passive node in the availability cluster.
12. 队列系统就提供这样的功能:用户提交作业,队列系统决定在哪些节点上运行此作业。
Queuing systems provide this functionality: a user submits a job and the queuing system decides which nodes it will run on.
13. 再次将储存库提升为节点将恢复所有集群队列的信息,但在此之前,应用程序可能遇到错误,因为它们使用的队列突然不能解析。
Promoting the node to a repository again restores knowledge of all the cluster queues, but prior to that, applications can experience errors because the queues they are using suddenly fail to resolve.
14. 输出节点也能够用于将某些消息引导到不同的节点和队列中。
Output nodes are also used to direct certain messages to different nodes and queue.
15. 单独节点上的队列管理器:最后一个选项是在不同物理服务器上的队列管理器之间划分流量,其中每个队列管理器为不同类型的消息做了优化。
Queue managers on separate nodes: the ultimate option is to split the traffic between queue managers on different physical servers, where each is tuned for a different type of message.
16. 这里的漏洞在于,分支节点可以不将消息发送到中心的输入队列,而是发送到中心的输出队列。
The vulnerability here is that a spoke node can address messages not to the input queue at the hub, but rather to the output queue at the hub.
17. 存在损害队列管理器的完整性的可能(例如,错误编写的插件节点)。
There is the potential to compromise the integrity of the queue manager (for example, with a badly written plug-in node).
18. 像许多队列算法一样,空队列只包含一个假节点。
Like many queue algorithms, an empty queue consists of a single dummy node.
19. 事实上,XSLT 2.0处理程序允许在输入队列中给出多个节点。
In fact, XSLT 2.0 processors can have multiple nodes supplied as an input sequence.
20. 一个节点上的多个队列管理器:在某些情况下,需要完全单独的队列管理器。
Multiple queue managers on one node: In some cases, completely separate queue managers are required.
21. 在备份节点(ha2)上,以用户mqm身份创建队列管理器。
On the backup node (ha2), create the queue manager as user MQM.WWW.WentIYI.coM
22. TORQUE系统管理器qmgr对于配置一个TORQUE集群的行为非常有用,比如队列、作业调度和执行节点。
The TORQUE system manager, QMGR is useful for configuring the behavior of a TORQUE cluster, including queues, job scheduling, and execution nodes.
23. 最后,MQOutput节点将输出消息写入到名为LENGTH.OUT 的队列中。
Finally, the MQOutput node writes an output message to a queue named LENGTH.OUT.
24. 不要在使用hacrtmqm创建队列管理器的节点上运行halinkmqm—它已经在那里运行了。
Do not run halinkmqm on the node on which you created the queue manager with hacrtmqm — it has already been run there.
25. 在主节点(ha1)上使用下面的命令创建一个高可用的队列管理器(以root身份)。
On the primary node (ha1) create a highly available queue manager using the command shown below (as root).
26. 在mq队列管理器与WebSphereApplicationServer运行于同一节点的配置中,使用绑定模式可提供性能优势。
In configurations where the MQ queue manager is running on the same node as WebSphere Application Server, using bindings mode offers a performance advantage.
27. 不过,此方法意味着拓扑并不能实现完全的工作负载平衡,因为添加serverFoundation节点将提高对中央队列管理器的吞吐量要求。
However, this approach means the topology does not achieve full workload balancing because adding Server Foundation nodes results in higher throughput demands on the central queue manager.
28. 在流之间保存ReplyIdentifier的一种方法是将该值存储在队列上,然后在应答流中使用MQGet节点来检索该值。
One way to save the ReplyIdentifier between flows is to store the value on a queue, then use an MQGet node in the reply flow to retrieve it.
29. LinkedBlockingQueue:一个由链接节点支持的可选有界队列。
LinkedBlockingQueue: An optionally bounded queue backed by linked nodes.
30. 图3演示了该输入流,其中使用了MQInput节点来从mq队列读取MQ消息。
Figure 3 illustrates the input flow, which USES an MQInput node to read MQ messages from an MQ queue.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
