热变形温度用英语怎么说，热变形温度的英文翻译

词语导航

基本信息

词语：热变形温度

繁体：熱變形溫度

拼音：rè biàn xíng wēn dù

英语翻译

【化】 distortion temperature

分词翻译

热变形的英语翻译：

【化】 thermal collapse

温度的英语翻译：

temperature
【化】 temperature
【医】 T; temperature

翻译例句

1. 保持在热变形温度或玻璃态温度以下。

This shall remain below the heat deflection temperature or glass transition temperature.

2. 它具有高强度，刚度和良好的热变形温度。

It exhibits high strength, rigidity, and good heat distortion temperature.

3. 该复合材料的热变形温度有所降低，但线膨胀系数减小。

Thermal deformation temperature and liner expansion coefficient of the composite were decreased.

4. 实验结果表明，随着弹性体含量的增加，热变形温度降低。

The results showed that HDT of the elastomer-modified PP decreases with increasing the elastomer content.

5. 玻璃纤维增强材料的性能提高，如强度，刚度和热变形温度。

The glass fiber reinforcement enhances performance such as strength, stiffness and heat deflection temperature.

6. 它结合了火焰高强度优良的平衡，刚度和热变形温度阻燃能力。

It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.

7. 该树脂韧性好，其浇铸体的热变形温度高是一种综合性能良好的缠绕用树脂。

The resin toughness, the casting of the thermal deformation temperature is a good Comprehensive Performance winding resin.wWw.wenTiYI.coM

8. 该树脂韧性好，其浇铸体的热变形温度高，是一种综合性能良好的缠绕用树脂。

The resin toughness is good, the casting body heat distortion temperatures are high, is a complex entanglement with a good performance resin.

9. 其基础树脂固化后的硬度和热变形温度较高，同时又具有良好韧性和耐气候性。

Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.

10. 其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。

Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.

11. 系统研究了材料的组成对表面硬度、透光率、冲击强度、热变形温度、密度等性能的影响。

The effects of componets and contents on surface hardness, impact resistance, defromation start temperature, density an so on were systematically studied.

12. 该树脂所生产制品具有很高的阻燃性能和机械强度，热变形温度高，固化速度快，浸透性好。

The resin produced by the flame-retardant products with high strength and mechanical properties, thermal deformation temperature, curing speed, and good soak.

13. 分别研究了有机粘土对树脂体系粘度、凝胶特性、力学性能和热变形温度、耐湿热性能等的影响。

The effect of organic rectorite on the viscosity, gel-time, heat deformation temperature, mechanical properties and wet-heat resistant property were researched.

14. 环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。

The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.

15. 该产品随着氯含量的提高，其热变形温度明显上升，其机械强度指标也相应提高，其应用范围十分广泛。

As the chlorine content of the product increased, the heat distortion temperature increased significantly, its targets have been increased mechanical strength, its wide range of applications.

16. 并对其熔融指数(MI)、热变形温度(HDT)、抗溶剂性、热稳定性、力学性能和破坏形态进行了研究。

The melt index (MI), heat distorsion temperature (HDT), solvent resistance, thermal stability, mechanical properties and fracture morphologies were presented.

17. 本公司专业生产研发耐高温pps材料，其热变形温度大于260度，是一种综合性能优异的特种工程塑料。

The company specializes in developing high temperature PPS material, the heat distortion temperature greater than 260 degrees, is a comprehensive performance of special engineering plastics.

18. 根据UPU增韧聚酯的落重冲击能和热变形温度等力学性能的测试，初步确定了适宜胶种的合成条件及其用量。

The suitable content of UPU were determined by the testing of impact resistance, hardness and HDT of the cured resins toughened with UPU.

19. 具有较高的热变形温度、断裂延伸率和冲击韧性，有效防止了制品在生产和使用中的开裂，同时具有固化快的特点。

A higher distortion temperature, elongation and fracture toughness, effectively preventing the production and use of products in the cracking, a fast curing the characteristics.

20. 实验结果表明，复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显著提高。

The results showed that the tensile strength, thermal-oxidative stability, flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents.

21. 随碳纤维比例的增大，该复合材料的拉伸强度、弯曲强度、弯曲模量及热变形温度均呈上升态势；而缺口冲击强度及击穿电压呈下降态势。

The results of experiments show that tensile strength, bend strength, bend modulus and heat deformation temperature of the composite materials are increased with the increase of carbon fibre content.

22. 提出了采用加热空气介质的高温空气槽测定材料热变形温度(HDT)的方法，通过几种高分子材料在油浴中及高温空气槽中测定HD T值的比较。

The way of heating air by using high temperature-air container was designed for the measurement of the heat deflection temperature (HDT) of polymer materials.

23. 文章对机床主轴组件温度场和热变形动态特性之间的差异进行了分析。

This paper analyzed the difference between the temperature filed and thermal deformation in dynamic characters for spindle components.

24. 针对铸轧工艺的特殊性，拟定了一套方便可行的铸轧辊温度场及热变形测试方案。

Based on the particularity of roll casting process, a practicable scheme is given for conveniently surveying the temperature field and thermal deformation of casting roller.

25. 建立了丝杠磨削热引起的温度分布理论计算模型，在此基础上分析了温升与工件热变形的关系。

The model for calculating the temperature distribution of leadscrew caused by grinding heat is established and the relationship between the temperature and thermal deformation is given.

26. 本文应用有限元法编制了计算程序，在微型机上对机床主轴箱箱壁进行了平面稳定温度场及热变形的理论计算。

In this paper, calculation programs of planar stationary temperature field and heat deformation for spindle box of general lathe are developed.

27. 采用热力学方法推导出稳态非均匀温度场中孔型零件在受力情况下的热变形公式。

The equations of thermal deformation of hollow piece under stress in uneven steady-state and even steady-state temperature field have been obtained.

28. 研究了水玻璃型壳在不同温度下的热变形特征。

In the paper, the hot deformation properties of sodium silicate shell in different temperature and different technology are studied.

29. 计算时把温度场和热变形作为结构应力计算的边界，获取活塞镶圈在热负荷状态下的综合应力场。

The temperature field and thermal deformation of the piston and ring carrier was used as the boundary in the calculation of stress field.

30. 研究了温度敏感性对复合材料开口圆柱层压壳热翘曲变形影响。

The impact of temperature dependent material property on the warpage of composite shell segment was discussed.