
词语导航
基本信息
词语:镍抗
繁体:鎳抗
拼音:niè kàng
英语翻译
【机】 ni-resist
分词翻译
镍的英语翻译:
nickel
【化】 niccolous; nickelous
【医】 Ni; niccolum; nickel; wire
【经】 nickel
抗的英语翻译:
contend with; defy; fight; refuse; repel; resist
【医】 Adv.; contra-; ob-
翻译例句
1. 已经证明,手印、卤烃油和机油的存在会大大降低包括不锈钢和镍在内的金属的抗温度能力。
The presence of fingerprints, halocarbon oils, and machine oils have been shown to significantly reduce the temperature resistance of metals, including stainless steel and nickel.
2. 镀镍:打底用,增进抗蚀能力。
The electroless nickel plating: with, improve the corrosion render ability.
3. 介绍了贵金属催化剂与镍基催化剂在重整活性和抗积炭能力方面的差异。
Differences in catalytic activity and ability to resist coking between noble metal based catalyst and Ni based catalyst are described.
4. 从镍磷化学镀的反应机理出发,讨论了反应中影响磷沉积速率和镀层中磷含量的主要因素,试验制备了含磷量较高且抗蚀性良好的镍磷镀层。
The chemical Ni P plating mechanism in acid baths and the major aspects which influence the plating rate and P content of Ni P alloy coatings were discussed.
5. 光亮镍打底后再脉冲无氰镀银,可获得更加光亮、结晶细致的镀银层,且抗变色性能及耐蚀性均增强。
With bright nickel strike plating before pulse non-cyanide silver plating, brighter and finer silver coatings with stronger anti-tarnish property and corrosion resistance can be obtained.
6. 采用正交试验和条件试验,筛选出了一种以植酸、苯甲酸钠、钼酸钠和EDTA为基本组成的镍磷合金抗蚀防变色剂。
A new anti-tarnish agent has been screened out, based on phytic acid, sodium benzoate, sodium molybdate and EDTA by means of orthogonal analysis and conditional experiments.
7. 钢铁件上薄层亮镍的高孔隙率必然带来低的抗蚀性。
The corrosion resistance of high porosity is very low on the thin bright nickel plating for steel and iron works.
8. 镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel, good machinability bad crack resistance. Repair welding of shole gray cast iron machined surface subject to no load.
9. 阀座、阀瓣密封面均由铁基铬镍不锈钢焊条堆焊而成,提高了耐磨性和抗冲蚀性。
Both sealed surfaces of the seat and disc are overlaying welded with Fe base stainless steel welding rod so as to improve wear resistance and erosion resistance.
10. 此外,多孔镍箔贮存式氧化物阴极还具有良好的抗中毒性、长寿命和较好的电子发射一致性等特点。
In addition, it also has features of anti-toxicity, long performance durability and the coincidence of electronic emission.
11. 以镍为活性组元,系统地研究了镍基芳烃加氢金属催化剂的抗硫性能。
The sulfur tolerance of nickel metal catalysts in aromatic hydrogenation has been studied systematically on the base of nickel active unit in this paper.
12. 镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
13. PLATIVE ISP3023是一种耐酸蚀绝缘保护油墨,专门开发应用于电镀一般金属的阻镀保护作用,或者酸蚀加工抗蚀保护作用,如镀镍、镀铜、镀铬、镀锡等;
PLATIVE ISP3023, a kind of insulated protective paint, is specialized applied to general plating treatment, or acid pickling, such as nickel plating, copper plating, chrome plating, tin plating, etc.
14. 结果表明,镍基高温合金经电解渗铝后;其抗高温氧化性能和耐热腐蚀性能大为提高。
The results obtained have shown that the thus processed Ni-base superalloys possess both greatly enhanced oxidation resistance and highly improved hot-corrosion resistance.
15. 事实上,它是如此好抗褪色,生锈和腐蚀,这种钢级往往是在海洋环境中使用,因为它是无镍,也是在外科手术中。
In fact, it is so good at resisting fade, rust and corrosion, that this grade of steel is often used in Marine environments and since it is nickel free it is also used in surgical procedures.
16. 医用高氮无镍奥氏体不袗的溶血率低于1%,抗溶血性能明显优于钴铬合金和316l不袗。
The hemolytic rate of BHNNFASS was less than 1%, and the result of hemolytic test of it is clearly better than that of 316l stainless steel and Co-Cr alloy.
17. 镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
18. 镍铜,易加工,但抗裂性较差。
Copper nickel, good machinability and bad crack resistance.WwW.WEnTiyi.COm
19. 镍铜,易加工,但抗裂性较差。
Copper nickel, good machinability and bad crack resistance.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
