钻屑用英语怎么说,钻屑的英文翻译


词语导航

基本信息

词语:钻屑

繁体:鉆屑

拼音:zuān xiè

英语翻译

【机】 drillings

相关词条

1.drillcuttings  

分词翻译

钻的英语翻译:

bore; dig into; drill; get into; jewel
【医】 bur; burr; buur drill; dental drill; drill; drilling
【经】 bit

屑的英语翻译:

bits; crumbs; fritter; scraps; tailing; trifling
【医】 ramenta

翻译例句

1. 建立了钻屑颗粒的受力模型表达式。

Establish the force model formula of drilling cuttings.

2. 流线泥浆样本的泥浆中夹带有钻屑。

A flowline mud sample contains drill cuttings entrained in the mud.

3. 对国外钻屑回注技术研究与应用情况进行了总结。

The foreign research and application situation of Cuttings re-injection technology is summarized in this paper.

4. 一种从整个泥浆系统中除去大钻屑的水力旋流装置。

A hydrocyclone device that removes large drill solids from the whole mud system.

5. 能抑制钻屑分散,有利于发挥固控设备效率和提高钻井速度;

Drilling cuttings dispersion is controlled and the penetration rate is improved because of the better performance of the solid control equipment.

6. 自进式钻头由旋转喷嘴、钻屑整合装置、推力提供装置等组成。

The self-feeding bit consists of the rotary nozzle, the cutting conformity device and the power supply device etc.

7. 水基泥浆和无毒复合泥浆及钻屑的排放,必须符合国家有关规定。

The discharge of any water-based mud, non-toxic compound mud or drilling breaks into the sea must comply with the relevant provisions of the State.

8. 采用矿用钻孔窥视仪并配合电磁辐射法和钻屑法对爆破进行了效果检验。

The blasting effect was checking using sight instrument, electromagnetic emission (EME) technique and drilling sludge methods.

9. 含油钻屑只有达到排放标准方可排放入海,若达不到排放标准则需运回陆上处理。

If the treatment can not meet the discharge standards, those cuttings must be shipped to shore for treatment.

10. 在对国外现场应用数据进行调研的基础上,确定了钻屑回注浆体性能参数调控范围;

This paper confirms the performance standard of cuttings re-injection slurry based on the information of the cuttings re-injection operation abroad.

11. 建立钻屑冲蚀的数学模型,从数学角度表达出了冲蚀磨损量与冲蚀影响因素间的关系。

Build erosive wear mode of drilling stem. From the view of mathematics, express the relationship between erosive wear quality and major erosion factors.

12. 初步确立了空气钻井钻柱冲蚀磨损机理,提出钻屑冲蚀是促使钻具失效的一项重要原因。

Establish the erosive wear mechanism of drilling string in air drilling and put forward that erosion wear is a substantial cause to promote drill string failure.

13. 以及钻井钻屑输送器,所述钻井钻屑输送器与用于运输来自容器的钻井钻屑的出口连通。

The outlets are in selective communication with a drill cuttings conveyor (14) for carrying drill cuttings from the vessel.

14. 通过室内实验,分析了钻屑加量对回注浆体性能的影响,并优选出了回注浆体合理配方。

The influence of the added cuttings dosage on the performance of re-injection slurry is analyzed by experiments. The reasonable treating formula of re-injection slurry is provided.

15. 对深孔钻屑组合机床分级进给机构进行改进后,达到了简化结构、方便调整、减少故障的目的。

After the modification of step feed mechanism of deep drill combined machine tool, simplifying structure, convenient adjustment and reducing fault rate have been proved.

16. 用钻屑量指标预测煤与瓦斯突出时,由于采样装置落后和操作不规范等原因,导致预测结果可靠性降低。

As result of backward equipment and wrong operation, the forecast results become unreliable when the index of drilling yields is used in forecasting coal or rock outburst.

17. 它是固相控制系统里出现的新型高效固液分离设备,使用它能够满足限制日益严格的离岸钻屑排放要求。

The duster cuttings dryer, which is a new type of high efficient solid-liquid separation equipment in solids control systems, can help operators meeting increasingly stringent environmental rules.

18. 本文在对钻屑法通过现场实测,实验室模拟和理论研究的基础上,提出用于快速估测松碎岩体应力的基本原理和实测技术。

The principles and measuring method are dealt with for fast estimation of stresses in loosened and broken rock in the paper on the basis of field measurement, lab. Modeling and theoretical analysis.WWw.wEnTiyi.cOM

19. 螺旋钻头底部阀门防止钻进过程中钻屑进入到空心的混凝土管中,当钻杆提出同时混凝土浆注入时,钻杆底部的阀门将被打开。

The valve at the bottom of auger can prevent drilling bits entering hollow pipe during operation. When drilling pipe is taken out and concrete grout is injected, the valve will be opened.

20. 横向截形是麻花钻螺旋面容屑槽的一个特征参数。

Drill cross section profile (DCSP) is a characteristic parameter of drill helix flute form.

21. 通过振动钻削和普通钻削的对比试验,该装置能有效地解决堵屑难题,并提高身管的内膛钻削质量。

The results of contrast testing on the vibration drilling and common drilling show that the technology can effectively resolve the problem of blocked chips and improve the hole qualities.

22. 所有深孔钻都是直出屑槽的,并且均为单切削刃。

All gun drills are straight-fluted, and each has a single cutting edge.

23. 分析了小直径深孔振动钻削对钻头的要求;设计了一种新型内排屑深孔钻头;分析了该钻头的结构和刃磨特点,进行了振动钻削试验。

Based on analyzing the demands of small-diameter deep-hole drill for vibration drilling, a new inner-chip removal drill was designed.

24. 他们使用小笤帚刷掉钻在作品缝隙中的雪屑。

They use small brooms to brush off snow caught in tiny holes.

25. 研究结果表明,利用轴向振动使常规钻削加工中常出现的切屑堵塞现象,可以通过有效地破坏近壁流动死区而得到控制,与常规钻削加工相比,振动钻削提高了系统的排屑能力。

The results show that vibration drilling has a better ability of chip removal than common drilling. The reason is that there exists a region in the vicinity of the wall where a chip can not b…

26. 研究结果表明,利用轴向振动使常规钻削加工中常出现的切屑堵塞现象,可以通过有效地破坏近壁流动死区而得到控制,与常规钻削加工相比,振动钻削提高了系统的排屑能力。

The results show that vibration drilling has a better ability of chip removal than common drilling. The reason is that there exists a region in the vicinity of the wal…

27. 研究结果表明,利用轴向振动使常规钻削加工中常出现的切屑堵塞现象,可以通过有效地破坏近壁流动死区而得到控制,与常规钻削加工相比,振动钻削提高了系统的排屑能力。

The results show that vibration drilling has a better ability of chip removal than common drilling. The reason is that there exists a region in the vicinity of the wal…

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!