节点地址用英语怎么说，节点地址的英文翻译

词语导航

基本信息

词语：节点地址

繁体：節點地址

拼音：jié diǎn dì zhǐ

英语翻译

【计】 node address

分词翻译

节点的英语翻译：

【计】 node; node point
【化】 nodal; nodal point; node
【医】 Gaussian points; nodal points
【经】 node

地址的英语翻译：

【计】 A; AD; ADDR; address; ADR; ADRS

翻译例句

1. 在树中移动，检查此节点是否与树中的任何节点地址相邻。

The tree is traversed to check if the node adjoins any other node in the tree with respect to the address.

2. 为了提高利用路由探测进行不可控网络拓扑发现的准确性，特别是解决别名问题，提出了一种全新的节点地址整合算法。

To enhance the exactness of topology discovery using traceroute in incontrollable network, especially to resolve the aliases problem, a new node address combination algorithm was presented.

3. 要使一个IP网络中的两个节点能够通信，那些IP地址必须在整个网络中是唯一的。

To enable communication between two nodes in an IP network, those IP addresses have to be unique among the whole network.

4. 您指定的主机名称或IP地址就是其他节点将用于与正在创建的节点通信的主机名称或 IP地址。

The host name or IP address that you specify is what other nodes will use to communicate with the node being created.

5. 在节点上设置了BMC地址之后，就可以进行远程电源控制，这样的话就可以更加轻松地配置集群了。

After you set the BMC address on a node, you have remote power control, which makes life easier when configuring the cluster.

6. 需要访问集群文件系统的每个节点都需要存储网络上的一个地址。

Each node requiring access to the clustered file system needs an address on the storage network.

7. 只需输入每个节点的主机名或IP地址。

Just enter a hostname or IP address for each node.

8. 首先，删除空闲树中(大于或等于请求的块大小的)地址最低的节点。

First, the node from the free tree with the lowest address (which is greater than or equal to the requested block size) is removed.

9. 启动IP：这是一个节点在首次激活并变为可用时使用的默认ip地址。

Boot IP: This is a default IP address a node USES when it is first activated and becomes available.

10. 将不同节点的MAC地址映射为IP地址。

Map MAC address of different nodes to IP addresses.

11. 当初始化第二个节点时，IP地址必须是第一个节点的地址。

While initializing the second node, the IP address has to be of the first node.

12. 源和目的地节点都用IP地址标识。

The source and destination nodes are identified by IP addresses.

13. 你必须添加节点的逻辑主机名和IP地址作为集群配置。

You have to add the logical names (hostnames) and IP addresses of the nodes to be configured as a cluster.

14. 因为该配置使用IP地址接管(IPAT)，所以每个节点上至少要配置两个网络适配器。

Since this configuration is going to use IP address takeover (IPAT), at least two network adapters need to be configured on each node.

15. 一个节点还有一个地址，也就是在数组中它的地址。

A node also has an address, that is, the address of its position in an array.

16. 这个IP地址映射到实际运行应用程序的节点。

This IP address is mapped to a node where the application is actually running.

17. TORQUE还要求所有节点名均被解析成一个IP地址，所以可以使用这些节点的IPMI作为伪执行节点，如清单27所示。

TORQUE also requires that all node names be resolved to an IP address, so use the IPMIs of the nodes as dummy execution nodes, as shown in Listing 27.

18. 节点首先返回到地址树的根上。

The node is returned to the address tree first at the root.

19. 地址树中每个节点的地址都比左边子树中的节点低，比右边子树中的节点高。

Every node in the address tree will have lesser address nodes in its left subtree and higher address nodes in its right subtree.

20. 注意，在上面我使用的是群集地址，而不是主节点的地址。

Note that I am using the cluster address in the above URLs and not the address of the primary node.

21. 下面示例中，DB 2数据服务器节点的IP地址是9.126.84.161，端口为50000。

For the example below, the IP address of the DB2 data server node is 9.126.84.161 and the port 50000 is used.

22. 为了给一个图案引入噪声，Hopfield要访问节点数组中的每一个地址。WWw.WenTiyI.cOm

To introduce noise into a pattern, the Hopfield net visits each address in the array of nodes.

23. 当连接建立后，客户端申请可连接的其他节点的IP地址列表并尝试连接，直到达到可连接数的最大值。

After the connection, the client requests a list of working addresses and proceeds to connect to other nodes until it reaches a quota.

24. 最重要的一点是，网络配置已完成并且已经进行了测试，其中包括能够执行从aix节点到iSCSIip端口地址的Ping测试。

Most importantly, the network configuration is complete and tested, including the ability to perform a ping test from the AIX node to the iSCSI IP port address.

25. 所有后续节点都是通过IP地址后的- m开关来添加的。

All subsequent nodes are added by using the -m switch followed by an IP address.

26. 因为先前选中了配置策略，只要可以建立quorum，并且至少有一个节点合格，那么浮动资源IP地址就保持正常运作。

With the choice of configuration policy selected earlier, as long as quorum can be established and at least one node is eligible, the floating resource IP address will remain operational.

27. 在这个示例中，HadoopMaster节点的IP地址是170.224.193.137。

In this example, the Hadoop Master node IP address is 170.224.193.137.

28. 按所列的次序为这些节点分配了从192.168.1.101 到192.168.1.107的本地IP地址。

These nodes are assigned local IP addresses 192.168.1.101 through 192.168.1.107, in the obvious order.

29. 节点按照地址从左到右排列(地址向右增加)，按照长度从上到下排列(因此子节点不会比其父节点大)。

The nodes are arranged left-to-right by address (increasing address to the right) and top-to-bottom by length (such that no child is larger than its parent).

30. 在master文件中添加主节点的IP地址。

Add the master node IP address to the master file.