
词语导航
基本信息
词语:压力舱
繁体:壓力艙
拼音:yā lì cāng
英语翻译
pressure cabin
分词翻译
压力的英语翻译:
press; tension; compressive stress; pinch; stress; tax
【化】 pressure
【医】 baro-
舱的英语翻译:
cabin
【医】 cabin
翻译例句
1. 同时,喷嘴和压力舱壁的设计,减少了重量。
As well, the nozzle and pressure bulkhead are designed for reduced weight.
2. 那架飞机将装备压力舱和更先进的航空电子设备。
It will feature a pressurized cabin and more advanced avionics.
3. 而在周期表里此行最重的元素,惰性气体氦,用于压力舱那类东西的小裂缝。
The next heaviest element in the periodic table, the inert gas helium, is used for detecting cracks in pressure vessels and the like.
4. 要修复这些裂缝,工程师设计了支架蔓延到其他地区的加压的压力舱段结构更强。
To repair the cracks, engineers designed brackets that spread the stress of being pressurized to other areas of the module that are structurally stronger.
5. 为了抵抗周围的水的沉重压力,潜艇它需要一个巨大的舱体,因而它要做得非常重。
Submarines are heavyweights withmassive hulls strong enough to resist crushing forces from the surrounding water.
6. 我们在蒙扎需要的下压力很低,所有车队都是如此,但是我们现在正试着降低驾驶舱,以后也一样如此。
We do have a low downforce package for Monza as all the teams will have but we are battling down the hatches on this car now and getting on with the future.WwW.wentiyI.CoM
7. 本文较详细地介绍了医用氧舱定期检验中有别于普通压力容器定期检验的内容及方法和应注意的问题。
The contents and methods as well as matters needed attention about periodical inspection of hyperbaric oxygen chamber which is different from pressure vessel have been introduced.
8. 卸压口盖,两个隔舱之间的口盖,打开后可使两舱压力相等。
BLOWOUT panel, a panel in the structure between two compartments that opens to equalize pressure in the compartments.
9. 为了确保更换压载水时船舶的安全,设计船舶时必须对船舶压载舱压力损失进行计算。
In order to ensure ship safety, we must know the ship"s ballast tank pressure loss.
10. 以某地铁标段施工的土压平衡盾构机为研究对象,建立了盾构密封舱土压力系统离散元仿真的几何模型;
Taking the shield machine tunneling in a subway section as the research object, the DEM geometrical model for analyzing the chamber pressure of the shield machine is established.
11. 密封舱压力的设置和控制直接关系到开挖地层的稳定、刀盘刀具的磨损和盾构掘进效率。
The pressure balance control between the chamber and the ground at the excavation face is the key for tunneling safely and efficiently.
12. LA新奥尔良的洛克希德·马丁公司团队,完成了探索任务- 1乘员舱压力容器锥部的最终焊接。
Lockheed Martin team in New Orleans, LA, completed the final weld of the cone section of the Exploration Mission 1 crew module pressure vessel.
13. 其次,计算并描述了槽型舱壁在侧向水压力作用下的弹性变形与弹性应力分布,以及舱壁局部与总体弹性屈曲模式。
Second, the elastic deformation, the elastic stress distribution, and the local and global elastic buckling modes were calculated and presented.
14. 所有测量单位例如功率、压力计、温度计、体积测量、舱容测量等均采用公制。
All measuring units such as power, pressure gauge, thermometer, volume gauge, tanks scales etc., to be in accordance with metric system.
15. 试验结果表明,泥水平衡盾构开挖面导致的地表沉降很大程度上取决于开挖过程中泥舱压力的浮动范围。
The results of the model tests were presented with particular emphasis on the balancing mechanism of slurry shields, the development of settlement at the excavating face and the limit slurry pressure.
16. “这些显示屏代表了朝F-35座舱的简洁风格迈进以及摆脱前一代压力表盘框架的重要过程,”乔恩·比斯利评论说,他是F-35的首席试飞员。
"Those displays represent a significant step toward the F-35 cockpit"s spare ambience and a departure from its steam-gauge predecessors, " notes Jon Beesley, the chief test pilot for the F-35.
17. 该试验舱已通过压力试验,实验证明了给出的结果的正确性。
The results are approved by the test to the vessel.
18. 建立出土率与密封舱压力变化率的数学关系,为盾构掘进密封舱压力控制提供参考模型。
The function of discharge rate and the changing rate of the chamber pressure is established, which provides the reference model of chamber pressure control for EPB machine tunneling.
19. 起动机安装在某通用发动机试验吊舱的冷却通风系统中,起动机环境的温度、压力对起动机的工作可靠性有着重要的影响。
Starter is installed in the cooling ventilation system of a general nacelle, the starter environmental temperature and pressure has important influence on the working reliability of starter.
20. 驾驶舱门控制组件有个压力传感器,目的是防止驾驶舱压力突然变化,导致门突然炸开。
It has two internal pressure sensors which starts the fault logic sequence if a rapid decompression in the cockpit occurs.
21. 离散单元法模拟盾构密封舱土压力系统工作过程的首要内容是改性土的模拟。
The first problem for DEM to simulate the work process of the chamber system of the EPB shield machine is the modeling of the conditioned sands.
22. 离散单元法模拟盾构密封舱土压力系统工作过程的首要内容是改性土的模拟。
The first problem for DEM to simulate the work process of the chamber system of the EPB shield machine is the modeling of the conditioned sands.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
