逻辑故障用英语怎么说,逻辑故障的英文翻译


词语导航

基本信息

词语:逻辑故障

繁体:邏輯故障

拼音:luó jí gù zhàng

英语翻译

【计】 logic fault

分词翻译

逻辑的英语翻译:

logic
【计】 logic
【经】 logic

故障的英语翻译:

breakdown; fault; hitch; malfunction; stoppage; trouble
【计】 booboo; F; failure; fault; malfunction
【化】 malfunction
【经】 breakdown; trouble

翻译例句

1. 使用逻辑故障排除法来了解网络症状并利用题目提供的信息来判断最有可能的形成该症状的原因。

Use a logical troubleshooting methodology to understand the symptoms and identify the most likely causes based on the documentation and resources that have been provided.

2. 闸明了应用三值逻辑进行故障检测的必要性,较详细地介绍了三值逻辑故障检测电路的结构和工作原理。

The author depicts the necessity of adopting ternary logic in fault detection, with detailed introduction of the structure and operation principle for ternary logic fault detection circuit.

3. 网络故障可以根据其性质分为物理故障和逻辑故障,也可以根据故障的对象分为线路故障、路由器故障和主机故障。

The network faults may be divided into physical faults and logic faults according to its nature, and also may be divided into the line fault, router faults and faults of main processor.

4. 在任何一个远程服务请求的故障发生之后,该应用将不得不包含逻辑来评估远程处理的可能状态,从而决定是否重新发出请求,等等。

Therefore, any failure during processing of the service request at the responder_s side results in the request waiting for processing or the response waiting to go out, but no in doubt states.

5. 但是,服务器说无法完全解除镜像,因为其中一个逻辑卷只有一个好拷贝,它就在出故障的磁盘上。

But the server said that it could not completely break the mirror, because the only good copy of one of the logical volumes was on the dying disk.

6. 可能出现这样的情况,应用程序使用逻辑消息排序发送组中的开头的若干消息,然后系统出现故障。

An application may send the first few messages in a group using logical message ordering, after which the system fails.

7. 当发生数据毁坏事故,例如软件故障、硬件故障、错误的应用程序逻辑和用户错误后,可以使用这些备份将数据库恢复到适当的状态。

These backups can be used to restore databases to their proper state after data corruption events, such as software failures, hardware failures, bad application logic, and user errors.

8. 在企业范围内,将这种唯一性的思想扩展到逻辑卷名,这样可以在发生计划内或者计划外停机时,在执行系统故障转移的过程中避免命名冲突。

Extending the unique mentality to logical volume names across the enterprise ensures naming conflicts will be avoided while performing system failovers during planned or unplanned outages.

9. Web服务业务流程执行语言(Web Services Business Process Execution Language, WS -BPEL)标准提供了错误处理程序和补偿处理程序,用于在您的业务流程逻辑中建模故障和异常路径。

The Web Services business process Execution Language (WS-BPEL) standard offers fault handlers and compensation handlers to model failure and exceptional paths in your business process logic.

10. 下一个逻辑步骤是通过执行一个受控的bimesbqm队列管理器故障转移来验证这个自动重新连接功能。

The next logical step is to verify the auto-reconnect functionality by performing a controlled failover of the IBMESBQM queue manager.

11. 当逻辑卷跨磁盘条带化且其中一个磁盘故障时,常常会发生这种情况。

This situation typically occurs when logical volumes are striped across disks and one fails.

12. 如果主系统出故障,可以将剩下的可用逻辑日志恢复到辅助系统上,然后使后者上线,担任新的主系统。

If the primary system fails, the remaining available logical logs can be restored on the second system, which can then be brought online and function as the new primary system.

13. 处理逻辑、同步和故障转移等均被透明地处理。

The processing logic, synchronization, failover, and so on, are all handled transparently.

14. 当由于以下原因之一而导致应用程序中出现逻辑错误时,就出现了语句故障。

A statement failure occurs when there"s a logic misstep in an application due to one of the following.

15. 新的驱动资产管理能力也具有,包括西门子SIMOCODE智能驱动设备,详细的故障指示和高性能的可信逻辑。

New drive asset management capabilities are also available that include Siemens SIMOCODE intelligent drive devices, detailed fault indication and high performance plausibility logic.Www.weNTiyi.CoM

16. 在软件中,错误是指导致程序发生故障或产生不正确结果的编码或逻辑错误。

In software, a bug is an error in coding or logic that causes a program to malfunction or to produce incorrect results.

17. 目前查找液压系统故障的传统方法是逻辑分析逐步逼近诊断。

Current search of hydraulic system failure of traditional method is logic analysis to approach the diagnosis.

18. 再利用D - S联合规则结合模糊逻辑理论,得到融合后的信度函数分配,从而确定故障元件。

The fusion belief function assignment is gotten by using D-S rule and fuzzy logic theory, and fault component is found.

19. 故障树模型是导致系统失效的基本事件之间逻辑关系的图形表示,应用于系统失效模型的定性和定量分析。

Fault tree model is the graphical expression of connection of basic events which result in system fault, and used in qualitative and quantitative analysis of system fault model.

20. 继电器是保护系统的逻辑元件,它感知故障,并使断路器解扣电路带电和断路器打开触点。

Relays are the logic elements of a protection system which sense the fault and cause the circuit-breaker trip circuits to be energized and the breakers to open their contacts.

21. 当站点1故障了,即使站点2还没有完全同步完,这些一致性卷组是不是没有逻辑问题了?

When the site 1 fault, even if the site is not completely synchronized with the end of the 2, the consistency of the volume is not a logical problem?

22. 当填写系统故障信息时,系统内置填写逻辑,能引导使用者规范操作。

When fault information of power system is input, this system USES the internal logic order to guide the standardization of user"s operation.

23. 通过分析产生电流越限和电缆故障的各种原因,画出报警设计的逻辑图。

It shows the logic diagram of alarm design by analyzing reasons of current spillage and cable malfunction.

24. 其基本思想是:利用测试码与测试响应的简单逻辑运算进行多重故障定位。

The main idea is to locate multiple faults with simple logical operations of test codes and test responds.

25. 然后采用强跟踪滤波器估计过程状态及传感器偏差,传感器偏差估计用于驱动一个故障检测逻辑。

Then, the STF is adopted to estimate process states and sensor bias, the estimated sensor bias is used to drive a fault detection logic.

26. 有可能这个卷已经同步了,那个卷还没有同步,那这时,站点1故障了,站点2的这些存储卷是不是得有逻辑错误了?

It is possible that this volume has been synchronized, the volume has not been synchronized, then at that time, the site 1 fault, the site of the storage volume of 2 is not a logical error?

27. 本文重点分析预处理系统的结构组成、逻辑筐图、程序编制以及投用后的故障处理。

This paper emphases on pretreatment system including construction constitutes, logic diagram, programming and failure treatment after usage.

28. 本文将机车继电器控制电路等效为数字组合逻辑电路,建立了它的固定故障等效模型。

The electric locomotive bang-bang circuit is converted into an equivalent digitalcombinational logic circuit for setting up its stuck-at fault model.

29. 安装,故障排除和维护动力传动,真空,液压和气动系统以及可编程逻辑控制器。

Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls.

30. 安装,故障排除和维护动力传动,真空,液压和气动系统以及可编程逻辑控制器。

Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!