外轴承用英语怎么说,外轴承的英文翻译


词语导航

基本信息

词语:外轴承

繁体:外軸承

拼音:wài zhóu chéng

英语翻译

【化】 outer bearing

分词翻译

外的英语翻译:

besides; in addition; not closely related; other; outer; outside; unofficial
【医】 ec-; ecto-; exo-; extra-; xeno-

轴承的英语翻译:

bearing
【化】 bearing

翻译例句

1. 当桥梁通道关闭时,两个油压缓冲装置提供除了弹性轴承外的支撑。

When closing the bridge two Oleo buffers are provided in addition to the elastomeric bearings.

2. 为满足不同的应用需求,薄壁轴承包括径向、断裂外滚道、角接触以及满装等多种配置和特性。

To meet the requirements of different applications, thin wall bearings including radial, outer raceway faults, angular contact and full equipment, and other configurations and features.

3. 当离合器踏板按下时,电缆或者液压活塞将推动离合器分离叉杆,离合器分离叉杆推着外伸的轴承贴在膜片弹簧的中间。

When the clutch pedal is pressed, a cable or hydraulic piston pushes on the release fork, which presses the throw-out bearing against the middle of the diaphragm spring.

4. 本文采用非线性分析方法研究了同时考虑支承阻尼和转子外阻尼的弹性支承滑动轴承系统的油膜失稳振动问题。

This paper studies the film unstable vibration of bearing system supported by flexible support considering both support damp and rotor extemal damp by use of nonlinear analysis.

5. 推力轴承采用自身泵外循环冷却系统。

Thrust bearing adopts self pump outer circulation cooling system.

6. 本文建立了同时考虑支承阻尼和转子外阻尼在内的弹性支承滑动轴承系统模型。

The paper established a modal of bearing system supported by flexible support considering both support damp and rotor external damp.

7. 除轴向负荷外,此类轴承还能承受一定的径向负荷(见“当量轴承动负荷”)。

These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").

8. 某超超临界660MW机组发生循环水泵外筒体断裂脱落、陶瓷轴承损坏的事故,造成重大损失。

The serious damage accidents induced by the out shell and ceramic bearing fracture of circulating pump in 660 MW thermal power plant have lead to great losses.

9. 介绍了调心球轴承外沟道的磨削方法,并分析了各自特点及应用。

The grinding method of aligning ball bearing outer groove is introduced, and their characteristics and applications are analyzed.

10. 以MB 1332 A外圆磨床“短三块”油膜滑动轴承的三块轴瓦为例介绍动压轴瓦的快速调整法。

Three bearing bushings of MB1332A external grinding machine "short three-piece" oil film sliding bearing is taken as an example to present quick adjusting method of dynamic pressure bearing bushing.

11. 外圈:轴承组件的四个基本组件之一,也称作外滚道;内圈装配在外圈里。

Cup: one of four basic components of the assembled bearing. Also referred to as the outer race; the cone assembly fits into the cup.

12. 设计参数合理的外弹性阻尼支承可以明显改善轴承-转子系统的固有特性及强迫振动响应。

External elastic damping support, if designed reasonably, may obviously improve the natural or forced vibration response characteristics of bearing rotor systems.

13. 这类轴承没有填充槽,除径向载荷外,还能承受双向作用的轴向负荷,即使在高转速下也是如此。

Does not fill the tank of these bearings, in addition to radial loads, but also can withstand the axial load in both directions, even at high speeds as well.

14. 试验和理论分析表明,利用该方法可以有效地将正常轴承和内滚道伤轴承、外滚道伤轴承的振动信号进行分离。

Experiments analysis show that the roller bearings vibration signal with normal, inner rings defect and outer rings defect are identified effectively.

15. 轴承环磨削过程中,以轴承环外径作为定位基准,在电磁无心夹具上磨削轴承环外滚道。

When grinding the bearing ring, the outside diameter of it was taken as locating datum to process the outer raceway with the assistance of electromagnetic centerless clamper.

16. 他就是专注从事生产高品质外球面带轴承、向心关节轴承以及杆端关节轴承的高新技术企业—泉州市德源轴承实业有限公司。WWw.wenTiYi.COM

Who, right is Quanzhou Deyuan bearing industrial Company, a high technology enterprise specialized in making the high quality YC bearings, Thrust bearing, and joint rod end bearings.

17. 各滚筒(15)的旋转轴(17)的轴承部形成于上述驱动齿轮(13)外周的齿部(22)的内侧。

Each of the rollers (15) has a bearing portion of a rotary shaft 17 formed inside the gear portion (22) at the outer circumference of the drive gear (13).

18. 外球面轴承优先适用于要求设备及零部件简单的场合,例如用于农业机械、运输系统或建筑机械上。

The spherical bearing applies to request priority equipments and parts of the simple situations, such as used for agricultural machinery, transportation system or construction machinery.

19. 轴承外滚道及挡边同步磨削时几何精度和外观质量要求高,普通刚玉类砂轮加工效果不好。

Geometric accuracy and semblance quality were required seriously during grinding outer ring raceway and rib of bearing synchronistically, common corindon grinding wheel was not very effective.

20. 重新设计粒化轮轴承的密封型式,并在轴承座外增加甩水环,解决了粒化轮卡死的问题;

They are redesigning the seal form of the bearing seat of granulation wheel and adding swing water ring out of the bearing seat, then lock question of the granulation wheel was solved;

21. 旋涡气泵结构紧凑,体积小,重量轻,不需变速装置,除轴承外其它部位没有直接接触磨擦,噪音低,送出的气源无水无油。

Swirl pump is compact, light weighted and no speed-adjusting device needed, no friction except bearer, low noise, no water and no oil in the output air.

22. 波簧通过轴承外座圈预压轴承,在轴承内起作用。

The wave spring preloads the bearing through its outer race, taking up play in the bearing.

23. 外球面球轴承外圈一般带油槽,也生产外圈无油槽的产品。

Usually, the outer ring of the tl bearings has grease groove, bearings having no grease groove are to be provided, too.

24. 但迄今为止,除了冲击试验外,还没有找到轴承座动力特性实测的好方法。

But till now, unless by impact testing, no other good method is presented to measure bearing support system dynamics.

25. 外球面轴承是轴承的一种。

Spherical bearing is a bearing.

26. 外圈是以轴承中心点为球心的球面, 向心球轴承具有自动调心性, 深沟球轴承滚动体与内、外圈滚道之间是线性接触, 外球面轴承能承受大的径向载荷。

The outer rig is sphere that based on the bearing"s center, the rolling entity linearly come into touch with raceways of inner and outer ring, which can support greater radial loading.

27. 带座外球面轴承是将滚动轴承与轴承座结合在一起的一种轴承单元。

Set-contained bearing is rolling bearing and housing will be together in a bearing unit.

28. 轮毂单元设计成有内法兰和外法兰,内法兰用螺栓固定在驱动轴上,外法兰将整个轴承安装在一起。

Wheel hub unit is designed with an inner flange and the outer flange and the inner flange bolted on the driving shaft, the bearing outer flange mounted together.

29. 公司主要经营外球面轴承、零类深沟球轴承、七类圆锥滚子轴承。

The core products are insert bearing, deep groove ball bearing, tapered roller bearing.

30. 轴承与轴的紧固方法是:对于带紧定螺钉的外球面球轴承,用内六角螺钉扳手将轴承宽内圈上的两紧定螺钉锁紧到位。

The method which the bearing is tightened to the shaft is : for set screws locking type bearing, tightening the two set screws located at two places on one side of the wide inner ring to the shaft.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!