地址启动用英语怎么说,地址启动的英文翻译


词语导航

基本信息

词语:地址启动

繁体:地址啟動

拼音:dì zhǐ qǐ dòng

英语翻译

【计】 address-enable; ADREN

分词翻译

地址的英语翻译:

【计】 A; AD; ADDR; address; ADR; ADRS

启动的英语翻译:

start-up
【计】 activating; actuating; enablement; startover; startup

翻译例句

1. 它的使用方法是把服务请求转到启动该工具所在的地址和端口,然后把请求从那里转发至实际的端点。

You use it by directing your service requests to the address and port under which the tool was started, and then forward the requests to the actual endpoint from there.

2. 您需要主机名或者客户端IP地址来启动调试引擎。

The host name or client IP address is needed to start the debug engine.

3. HTTP应用程序将显示采用两个SIP用户代理服务器 (UAS)的地址和端口号的网页,并启动它们之间的连接。

The HTTP application will display a Web page that takes the address and port numbers of two SIP User Agent Servers (UAS) and initiate a connection between them.

4. 有些IBM扩展“总是启动”,即各种视图显示关于一个与其地址相邻的对象的额外信息。

Some IBM extensions are "always on," meaning that various views show additional information about an object next to its address.

5. 现在我们已经有了地址,并准备好启动呼叫,我们还需要设置SIP请求。

Now that we have the addresses and are prepared to initiate a call, we need to set up the SIP request.

6. 如果您有足够的物理内存和地址空间,您可以允许泄漏继续,但必须在进程地址空间耗尽之前重新启动应用程序。

If you have enough physical memory and address space, you can allow the leak to continue on the basis that you will restart your application before the process address space is exhausted.

7. 早期时,启动一台计算机意味着要给计算机喂一条包含引导程序的纸带,或者手工使用前端面板地址/数据/控制开关来加载引导程序。

In the early days, bootstrapping a computer meant feeding a paper tape containing a boot program or manually loading a boot program using the front panel address/data/control switches.

8. 启动IP:这是一个节点在首次激活并变为可用时使用的默认ip地址。

Boot IP: This is a default IP address a node USES when it is first activated and becomes available.

9. 脚本完成时,计算机在设置完BMCIP地址之后,用拷贝到启动镜像的DOS关机程序自动关闭。

When the script is completed, the computer turns off automatically after having its BMC IP address set using the DOS power-off program you copied to the boot image.

10. 也无需启动浏览器,并输入url地址。

You don"t need to launch a browser and type in a URL address.

11. 例如,假设一台客户计算机在PXE启动期间从服务器得到地址192.168.0.2。

As an example, consider a client computer getting the address 192.168.0.2 from the server during PXE boot.

12. 获得了锁的应用会接管IP地址,成为新的主应用,并将旧的主应用杀死,在旧应用的节点上启动一个新的从应用。

The slave that gets the lock will steal the IP address, become the new master and will kill the old master server and boot a new slave in its place with the old disks from the old master.

13. WebSphere服务器应该已经自动地被配置并启动,而且嵌入式的Web浏览器应该自动启动,设置为正确的 Web地址。WwW.wenTIYI.cOm

The WebSphere server should already be automatically configured and started for you, and the embedded Web browser should automatically launch set to the correct Web address.

14. 使用远程启动配置启动Eclipse,并指定远程应用程序的目标VM地址。

Start Eclipse using the remote launch configuration and specify the target VM address of the remote application.

15. 启动一个浏览器,并为目的地址输入以下url。

Launch a browser, and enter the following URL for the destination address.

16. 在任何情况下,function1在启动以后,它会为buffer1预留空间,这在图1中显示为具有一个低地址位置。

In any case, once function1 started up, it sets aside space for buffer1 , which Figure 1 shows has a lower address location.

17. heartbeat成功启动后,您将看到一个新的接口,其IP地址是您在 ha.cf文件中配置的那个。

start. After heartbeat starts successfully, you will see a new interface with the IP address that you configured in the ha.cf file.

18. 当用户第一次启动OpenOffice.org时,会定义一个地址名册。

When the user starts OpenOffice.org for the first time, an address book can be defined.

19. 定义这种地址最容易的方法是在你的工作空间中创建一个简单项目,然后使用配置中的Common标签在该项目中建立启动配置。

The easiest way to define such a location is to create a simple project in your workspace, and then create the launch configuration in that project in the Common tab of the configuration.

20. 启动试图通过指定的地址和端口连接到VM,结果显示在Debug视图中。

The launch attempts to connect to a VM at the specified address and port, and the result is displayed in the Debug view.

21. 您可以启动您的Rails应用程序,通过应用程序服务器的公共ip地址连接它。

You should be able to launch your Rails application and connect to it over the public IP address of the application server. If you get an error, check the following.

22. 在启动过程中,JVM首先保留出完整的1000MB空间(从0x10180000到0x4e980000范围之内的地址都不能用),然后提交启动过程所需要的那一部分,该例中为4 MB。

During startup, the JVM initially reserved the full 1000mb (making the address range 0x10180000 to 0x4e980000 unavailable) and then committed just what it needed to get started, in this case 4mb.

23. 如果有,它将其转发给 Apache SOAP引擎,然后此引擎分析XML 有效载体,并在其本地注册表(启动时从DeployedServices.ds文件读入)上使用目标Web服务地址来执行查询。

The engine then parses the XML payload and uses the target Web service address to perform a lookup in its local registry (populated at startup when it reads the DeployedServices.ds file).

24. 在LPAR上启动Linux映像时,您可能会发现网络服务不能按预期工作;尽管分配了IP地址,网络仍然不能访问。

When you bring up the Linux image on a LPAR, you may find that the network service does not behave as expected; in spite of allocating the IP address, the network can be unreachable.

25. 同样,用IPv6地址定义的无磁盘或无数据客户机无法启动。

Similarly, a diskless or dataless client defined with an IPv6 address will fail to boot.

26. 现在,启动工作站上的浏览器,通过默认的IP地址(或者使用您分配给它的IP地址)来访问BladeCenter管理模块的web前端。

Now, start the browser on your workstation and access the Web front-end of the BladeCenter Management Module using the default IP address (or use the IP address that you have assigned to it).

27. 你只要启动下载到你的电脑中的服务器,然后输入你电脑的IP地址即可。

Just launch the server that you downloaded on the PC, then type in your computer"s IP address.

28. 例如,通道启动程序地址空间的用户ID需要连接到队列管理器的权限,但通道本身不需要。

For example, the user ID for the channel initiator address space needs the authority to connect to the queue manager, but the channels themselves do not.

29. 例如,通道启动程序地址空间的用户ID需要连接到队列管理器的权限,但通道本身不需要。

For example, the user ID for the channel initiator address space needs the authority to connect to the queue manager, but the channels themselves do not.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!