复合金属用英语怎么说,复合金属的英文翻译


词语导航

基本信息

词语:复合金属

繁体:復合金屬

拼音:fù hé jīn shǔ

英语翻译

【化】 clad metal

相关词条

1.cladmetal  2.compositionmetal  3.compositemetal  

分词翻译

复的英语翻译:

again; answer; compound; duplicate; resume; turn over
【医】 amb-; ambi-; ambo-; re-

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

属的英语翻译:

belong to; category; dependents; genus; subordinate to
【医】 genera; genus; group; herd

翻译例句

1. 提供了一种混合式复合金属部件。

A hybrid composite-metal component is provided.

2. 该复合金属丝由内层合金丝与外层电镀铬组成。

It belongs to a new material to deeply work float glass and consists of alloy tinsel inner layer and electroplated chrome outer layer.

3. 综述了复合金属丝网多孔表面的强化沸腾传热现状。

The situation of strengthened boiling heat transfer of perforated surface for clad metal wire mesh was mentioned.

4. 银的压铆螺母柱,不锈钢的复合金属,还有亚克力字。

Silver standoffs, composite metal with a stainless steel finish, and acrylic lettering.

5. 本发明提供一种复合金属的铝箔带及制备方法和用途。

The invention provides an aluminum foil belt of complex metal, a preparation method and application thereof.

6. 覆盖了复合金属面板和金属条纹壁板的立面也是对场地的采光条件作出的直接回应。

Clad in composite metal panels and metal ribbed siding, the facades also express the direct response to solar conditions of the site.

7. 通过氧指数检测及热重分析考察了复合金属氧化物添加量对软PVC阻燃性能的影响;

The flame retardant of the flexible PVC treated with composite metal oxides was studied by oxygen index (OI) and differential thermal analysis;

8. 本文综述了纳米复合金属陶瓷材料的研究现状及存在问题,并指出了今后研究的发展趋势。

In this paper, the research status quo and problems of nano-composite cermet die materials are reviewed, and future trends are put forward.

9. 我们盼盼好进不锈钢锅具的锅身锅底均为三层,采用医用级不锈钢铝复合金属材料精制而成。

We manufacture the pans which the body and the bottom are all 3 layers and elaborately incorporated with medical grade stainless steel aluminum composite metal material.

10. 本发明公开了属于催化剂成型技术领域的一种层状双羟基复合金属氢氧化物多孔性微球的制备方法。

The invention discloses a method for preparing laminated dihydroxy composite metal hydroxide porous microspheres, and belongs to the technical field of catalyst forming.

11. 镶铸复合金属材料截齿是利用镶铸工艺,将铬系耐磨合金与抗冲击性能好的低合金钢一次浇铸成型。

The cast alloy steel bit-sharpener has been prepared by pouring the chrome abrasion resistance steel and the low-alloy steel with fine impact resistance one-step using cast-in technique.

12. 复合金属丝作为热蒸发真空镀膜工艺的蒸发源,在普通的白色浮法玻璃基片或塑料基片上形成茶色镜。

This combined tinsel is used as evaporating source for the process of vacuum plating with heat evaporation which forms dark brown glass on basic a substrate of general white float glass or plastic.wWw.WeNTIYI.CoM

13. 总结了该领域最近几年新开发的单金属氧化物、复合金属氧化物以及非金属氧化物载氧体的最新研究进展。

The new research advances in oxygen carriers in several recent years, including single metal oxides, multiplex metal oxides, nonmetal oxides are given.

14. 在这些墙体盒子和外部保护层(一个复合金属镶板系统)之间是空的,直白地说就是一个“呼吸空间”,给这些Hemcrete提供自然通风。

Between the walling cassettes and the external cladding (a composite metal panelling system) is a void, literally a "breathing space", which provides natural ventilation for the Hemcrete.

15. 以苯酚为原料,复合金属离子为催化剂,研究用气相氧化合成苯醌,用铁粉还原苯醌制对苯二酚的两步法工艺,考察了氧化过程中的工艺条件对反应的影响。

The two-step process involving gas oxidation of phenol to benzoquinone with complex metal ions catalysts and reduction of benzoquinone to hydroquinone with iron powder was studied.

16. 金属基复合材料都要在基体合金熔点附近的高温下制备。

All Metal matrix Composites (MMCs) were fabricated at high temperature near the melting point of matrix alloys.

17. 研究了金属基体及其中镍铬合金的含量对复合材料的硬度、摩擦系数和磨损率的影响。

The effects of metal base content and NiCr alloy addition on hardness, friction coefficient and wear rate of the composites were studied.

18. 介绍了银汞合金桩核、螺纹桩复合树脂桩核、铸造金属桩核、组合式桩核的制作方法和临床应用。

There are such types of pile combs as silver-mercury, thread compound, mould metal, combination. The thesis also discusses the making and the clinical application.

19. 得到了开发含镁、碱土金属复合合金的最佳工艺和参数。

Thherefore, the best technics and parameters in developing the alloy are discovered.

20. 结果表明:硬质合金-45钢双金属复合耐磨材料结合层硬度过渡均匀,冲击韧性是普通硬质合金的5—6倍。

The results show that the hardness of combination area of cemented carbide-steel 45 composite is 5—6 times beyond that of the general cemented carbide.

21. 通过低压铸造后固溶处理的方法,获得了网状金属间化合物增强铝合金表面复合层。

Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.

22. 同时还介绍了铸造铝合金-金属陶瓷复合材料的试验情况及发展前景。

Meanwhile the paper also presents the experimental information and developing prospects of the cast aluminium alloy-ceramic metal compound material.

23. 采用镶铸工艺制备了硬质合金-45钢双金属复合耐磨材料。

The wear resisting composite of cemented carbide-steel 45 is fabricated by using casting-in process.

24. 试验表明,变质和细化元素的添加对该金属基复合材料组织的影响与相应的基体合金一致。

Experimental results showed that, due to the addition of modification or refinement elements, the changes in the structure of the composite were identical with that of unreinforced matrix alloy.

25. 采用金属型、呋喃树脂砂、石墨砂等复合铸型,成功生产了大型、薄壁、复杂铝合金铸件。

By adopting the compound mold of die mold, furan resin sand and graphite sand, the heavy duty thin wall complex Al-alloy castings have been successfully produced.

26. 本文研究用快干涂料法来制造金属基表面复合材料的铸渗表面合金化工艺。

This article studied the Cast-in-face process of Fast-dry coatings for producing the metal matrix composites in face.

27. 复合原材料的原料可以使用木片或水合金属化合物。

Wood pieces or a hydrated metal compound may be used as the composite material.

28. 利用中间过渡层的作用,在镁基金属复合材料上激光熔覆了不锈钢合金层,熔覆层与基体为冶金结合。

With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.

29. 利用中间过渡层的作用,在镁基金属复合材料上激光熔覆了不锈钢合金层,熔覆层与基体为冶金结合。

With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!