加工性能用英语怎么说,加工性能的英文翻译


词语导航

基本信息

词语:加工性能

繁体:加工性能

拼音:jiā gōng xìng néng

英语翻译

【化】 handling characteristics; processability

分词翻译

加工性的英语翻译:

【化】 workability

能的英语翻译:

ability; able; be able to; can; capable; energy; skill
【化】 energy
【医】 energy

翻译例句

1. 对灰铸铁的加工性能进行了分析。wWW.WentIYi.cOM

The machinability of gray iron was analyzed.

2. 同时对共混体的挤出加工性能进行了研究。

At the same time the Brabender extrusion behaviour was also studied.

3. 延展性和可锻性是金属的两种重要加工性能。

Two important working properties of metals are ductility and malleability.

4. 它通过改善流动性,提高塑料产品的加工性能。

It provides improved flow during processing while retaining temperature resistance and toughness.

5. 增加机械加工性能。

To improve machinability.

6. 马铃薯淀粉由于其优良的加工性能,应用范围广泛。

Because of its fine processing characteristics, potato starch has been used extensively.

7. 研究了聚氯乙烯与稀土稳定体系的加工性能和力学性能。

The processing and mechanical properties of the rare earth stabilized polyvinyl chloride systems were studied.

8. 纳米凹凸棒土的加入一定程度上改善了复合材料的加工性能。

The processability of the composite was improved to some extent by the addition of n-ATP.

9. 磨辊的硬度、耐磨性与切削加工性能,存在难以兼顾的矛盾。

For the rolls of a roller mill there are contradictions among their hardness, wear resistance and machining properties to which considerations are hard to be given comprehensively.

10. 慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。

Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.

11. 上述改进将明显改善以马来酰亚胺树脂为基体的复合材料的加工性能。

In addition, the processability of the composite materials with maleimide resin as matrix could be improved apparently.

12. 本文在实验的基础上提出的适合中间退火的工艺可稳定钼丝加工性能。

Base on experiment, this article presented some optimum technological parameters of middle annealing that can stabilize the processing properties of molybdenum wire.

13. 摘要:机床中,动力头是机床的核心部件,直接反应着机床的加工性能。

Abstract: in the machine tool, the power head is the core component of the machine, which is the direct reaction process performance.

14. 如果筒子质量对后道加工性能不利的话,纱线质量再好也没有多大意义。

The best yarn quality is of little use if the package quality adversely affects the downstream processing properties.

15. 造出的最佳配方具有良好的成膜性和加工性能,膜的综合力学性能良好。

The chosen optimum formulation had good film reforming properties, processing properties, complex mechanical properties of film.

16. 随铝含量增加单相奥氏体区变小变无,液化温度降低,热加工性能恶化。

With Al content increasing, Uniphase austenite area decreases or disappears, the liquefaction temperature becomes low, and hot-workability worsens.

17. 结果表明,半固态连续铸轧技术可以提高板带的塑性加工性能,细化晶粒。

The result shows that the technology of semi-solid strip casting and rolling can improve plastic processing property and refine grain.

18. 随着超细硅灰石用量的增大,体系的拉伸强度、耐热性能和加工性能都稍有下降。

The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount.

19. 它具有优异的热稳定性,能改善PV C材料的力学性能、加工性能和抗老化等性能。

They have excellent heat stability and can improve PVC mechanical property, processing property and aging-resistance and so on.

20. 复合材料性能优于纯abs,多矿物复合材料的性能最优,且复合体系的加工性能良好。

The properties of composite materials are better than pure ABS, and composite materials with multi mineral are best and have fine processing properties.

21. 印制电路板用处理玻璃布采用先进技术与装备生产,具有优良的电绝缘性能和加工性能。

The print circuit wafer uses the vanguard technology and the equipment production with the processing glass cloth, has the fine electric insulation performance and workability.

22. 针对高聚合度聚氯乙烯加工性能较差的缺点,综述了改进其加工性能的化学和物理方法。

In connection with the poor processibility of high polymerization degree poly (vinyl chloride), chemical and physical methods for improving its processibility were reviewed in this paper.

23. 与烧结磁体比较,粘结磁体具有优异的成形与加工性能,因此近年来引起了人们广泛的关注。

Compared with sintered magnets, bonded magnets have excellent attribute for processing and machining, so they have attracted wide attention in recent years.

24. 它具有高刚度,尺寸稳定性和耐热性优良的加工性能,包括低翘曲性和抗沉过硬的形成相结合。

It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low warp and resistance to sink-mark formation.

25. 在聚酯中引入刚性链段(即将脂肪族聚酯与芳香族、液晶基元共聚合)可改善聚酯的加工性能;

The processability of polyesters could be improved significantly after incorporating stiff chain segment through copolymerization of aliphatic polyester with aromatic liquid crystal element.

26. 对挤出设备、工艺条件和胶料的加工性能等方面进行较全面的分析,对生产实践有积极的意义。

Presents the analysis of extrusion equipment, production process and the processing property of compound, it is very important for production practice.

27. 试验结果表明:涂层刀片干铣削高强度钢的加工性能优异,工件加工表面质量达到半精磨水平。

The advantages of coated cemented carbide tool in dry milling of high-strength steel are demonstrated, and the workpiece surface roughness reaches the level of semi-finishing grinding.

28. 该产品具有良好易切削性能和机械加工性能,从而避免了薄壁推管(司筒)因热处理而产生变形。

The product has excellent tooling quality and machining performance, so as to alleviate and avoid the deformation of ejector pin because of heat treatment.

29. 在分析料源岩性试验和岩石加工性能的基础上,给出了设备选型的原则及关键设备选型的基本方法。

On the basis of analyzing the test of rock properties and its processing characteristics, this paper describes the principles of equipment selection and the basic methods of key equipment selection.

30. 在分析料源岩性试验和岩石加工性能的基础上,给出了设备选型的原则及关键设备选型的基本方法。

On the basis of analyzing the test of rock properties and its processing characteristics, this paper describes the principles of equipment selection and the basic methods of key equipment selection.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!