
词语导航
基本信息
词语:合金过程
繁体:合金過程
拼音:hé jīn guò chéng
英语翻译
【电】 alloy process
分词翻译
合金的英语翻译:
alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy
过程的英语翻译:
course; procedure; process
【计】 PROC
【化】 process
【医】 course; process
【经】 process
翻译例句
1. 研究了化学镀铅锡合金过程中各影响因素对镀层的组成和厚度的影响。
Effects of conditions of electroless plating of Pb Sn alloy on the composition and thickness of the coating were studied.
2. 分析了氰化镀铜锡合金过程中镀层出现毛刺弊病的原因,并提出了解决方法。
The case of burrs defective in cyanide tin - copper alloy deposits were investigated and preventive methods were proposed.
3. 研究不同浓度甘氨酸对电沉积铁铬合金过程的影响,分析了甘氨酸在电沉积过程中的作用。
The influence of the glycine concentration during electrodepositing Fe-Cr alloy and the effect of glycine on electrodeposition were studied.
4. 在结晶器外套材料的不同情况下,对低频电磁铸造铝合金过程的电磁场进行了三维有限元数值模拟。
A 3d FEM numerical simulation of electromagnetic field in the crystallizer with different outer sleeves materials for al melt in low-frequent electromagnetic casting were conducted.
5. 研究了浇注温度、拉坯速度、倾斜板长度和倾斜角度对倾斜冷却半固态连铸a356铝合金过程稳定性的影响。
Influences of casting temperature, casting speed, length and Angle of inclined cooling plate on the stability of semisolid continuous casting for A356 alloy by inclined cooling were studied.
6. 研究人员说,一种叫做磁滞的过程会引起热能损失,但这种新合金具有低磁滞特性。
A process called hysteresis causes some of the heat energy to be lost, but this new alloy has a low hysteresis, the researchers say.
7. 钢是铁与碳的合金,焦煤便是熔炼过程中碳的来源。
Steel is an alloy of iron and carbon. Coking coal is a source of carbon in the smelting process.
8. 和含碳量较高的合金不同,含碳量低的合金稍软一些,在锻造过程中,两种合金熔合在一起,就会形成极其漂亮的花纹。
Metal with low carbon level is soft unlike metal that contains much carbon. In forging the two kinds of metal are mixed forming the most beautiful pattern.
9. 这在合金的过程中发生,就像黄金和钯合金达到“白金”效果一样。
This happens in an alloying process so gold is combined with palladium to create that "white gold" effect.
10. 这个过程还依靠用在铝合金中的硅粒改变形状来完成,即找到气泡并阻止其膨胀。
It relies on silicon fragments, which are used in aluminium alloys, changing shape and, in effect, pinning down the gas-containing pores to prevent them from expanding.
11. 蚀刻,抵制油墨可应用于金属或合金表面使用任何合适的喷墨印刷的过程。
The etch-resist ink may be applied to the metal or alloy surface using any suitable ink jet printing processes.
12. 电镀:利用电解原理,使金属或合金沉积在制件表面,形成均匀、致密、结合力良好的金属层的过程。
Electroplating: use the principle of electrolysis, the metal and alloy parts deposition in the surface, form even, density, good adhesion of the metal layer process.
13. 本文主要研究了大高径比ZA27合金铸件挤压铸造过程的若干基本问题。
The fundamental problems of ZA27 alloy squeeze casting with high ratio of height to thickness were studied in this paper.
14. 电镀就是利用电解原理在某些金属表面上镀上一薄层其它金属或合金的过程。
Electroplating is to use the principle of electrolysis in some metal surface plating a thin layer of the other metal and alloy process.
15. 锻造合金:较易延展的金属合金,在制造过程中可以进行热加工或冷加工。WWW.wEntIyi.Com
Wrought alloy. A metal alloy that is relatively ductile and amenable to hot working or cold working during fabrication.
16. 氢脆:由于浸蚀,除油或电镀等过程中金属或合金吸收氢原子而引起的脆性。
Hydrogen brittleness: because, in addition to the erosion oil or plating process such as metal and alloy hydrogen atom absorption and cause brittle.
17. 研究了铝合金消失模铸造过程中的涂料行为。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
18. 对镁合金焊接过程中易燃烧、焊接变形大等问题提出了有效的控制措施。
We also present effective control measures for the problems such as flammability and big transformation in magnesium alloy welding process.
19. 采取正确的过滤和沉淀措施后阳极黑色附着层对镍锰合金电铸过程不会产生明显的影响。
After proper filtration and precipitation, the loose black layer had little effect on the electroforming process of the Ni-Mn alloy.
20. 本文研究了金属和合金塑性变形过程的热激活参量。
The thermal activation parameters of metals and alloys in the plastic deformation process are studied.
21. 在LY12铝合金凝固的过程中施加脉冲电流或脉冲磁场,研究脉冲电流或脉冲磁场对这种合金凝固组织的影响。
The effect of pulsed current and pulsed magnetic field on the solidification structures of LY12 aluminum alloy was studied.
22. 应用元胞自动机模型对合金钢表面氮化及扩散层中氮化物沉淀过程进行了计算机模拟。
Simulations of surface nitridation and nitride precipitation in alloy steels have beeb carried out with cellular automaton modeling.
23. 铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
24. 铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
