
词语导航
基本信息
词语:展开曲线
繁体:展開曲線
拼音:zhǎn kāi qū xiàn
英语翻译
【化】 developed curve
分词翻译
展开的英语翻译:
spread; unfold; deploy; evolve; open; carry out; splay; stream
【计】 deployment; expand; spread
【化】 development
曲线的英语翻译:
curve
【医】 curve
【经】 curve
翻译例句
1. 本文介绍了一种用半径为r的圆弧绘制多节等径直角弯头展开曲线的方法——圆弧法。
In this paper, a method-ARC method is introduced, by which the development chart can be drawn, of multiple-piece, equal-diameter and right-angled elbows with the radius as the arc of r.
2. 利用计算机绘制零件的展开图,然后转换成机器代码,通过线切割等数控机床对展开曲线进行加工。
By means of computer, the part"s outspread drawings were protracted and then changed into language before the outspread curves were processed with numerical-controlled machine tool.
3. 然后针对计算比较困难的一般反时限曲线,介绍了分区查表和泰勒展开法计算时延累加量的算法。
To resolve the difficulty of progressive time calculating in normal inverse-time overcurrent curve, two algorithms of zonal table-lookup and Taylor expansion are put forward.
4. 曲线的墙面形成了一个保护罩,抵抗南面的阳光,它舒展开去容纳一系列分层的面朝北的窗户。
The curving wall forms a protective shield against the southern sun and opens out to accommodate a series of layered north-facing Windows.
5. 利用泰勒展开技术,给出了长波区域弯曲振动模式和伸缩振动模式的弥散曲线渐近表达式;
By means of the Taylor expansion technique, the asymptotic expressions of the dispersion curves at the long wavelength region were derived for flexural and longitudinal vibration modes.
6. 运用泰勒展开的一阶近似估计推导过定点的指数曲线的非线性直接估计公式。
Nonlinear directly estimating formula for exponential curve which, through fixed point, was derived, by using first order approximation of Taylor expansion.
7. 一般齿轮齿形曲线在一点邻域的高阶阶戴劳级数展开后,会发现齿面啮合点邻域间隙为2阶无穷小。
The common gear tooth profile curve launches after neighborhood higher order step taylor"s series, can discover the tooth face meshing point neighborhood gap is 2 step infinitely greats.
8. 本文对微机计算具有对称外轮廓曲线的圆简零件板金下料的展开尺寸进行了研究。提出了板金下料的通用程序,从而提高了下料尺寸的精度和效率。
In this research of Calculation of spread dimensions of a cylindrical unit possessed symmetrical outline, a general program with high precision and efficiency is advanced.
9. 假定波浪为正弦波,利用曲线积分和幂级数展开推导出板形公差。
Provided that the buckle as the sine-wave, the shape tolerance can be deduced by using the power series expansion as well as the curve integration.
10. 运用渐开线展开和曲线包络原理,建立了双渐开线齿轮端面齿廓数学模型,用数据验证了模型的准确性。
The outspread principle of involute and enveloping principle of curve is applied to build the model of double involutes gear contrate profile, the veracity is verified by the data.
11. 运用不规则曲线迎合异形空间,空间的三边自然地围绕核心的中岛区域展开,使整个空间呈现出流线型结构,从而拒绝空间死角。
The three sides are designed to naturally spread around the center of the area, thereby making the entire space in a streamlined layout without any dead space.
12. 本文的主要工作就是围绕NURBS曲线曲面的形状修改展开的。
In this paper, the main work is about the modification of NURBS curves and surfaces.
13. 同时这种方法也可应用于任意曲线轴线的圆截面工件的毛坯展开中。
This can calculate the accurate size of the blank be used in the expanding of circular section workpiece with discretional curve as its axes.
14. 首先,设计基于带符号阶乘展开式的椭圆曲线标量乘和多标量乘算法。
Firstly, based on the signed factorial expansions,. The fast algorithms for scalar multiplication and multi-scalar multiplication on elliptic curves are presented.
15. 文章基于3.5轴数控铣床,利用螺旋线展开的平面曲线编程,分层切削,加工出变螺距螺纹;
Programming by the plane curve unwrapped from the helix curve and cutting layer by layer, we created the variable pitch screw on the 3.5 axis NC milling.
16. 用差分法展开导向曲线,编制了单形立地指数表。
Single form site index table was constructed after derived curve was expanded by differential method.wWW.WeNTIYi.cOM
17. 第5章主要介绍了展开实体创建模块,基于三角形等面积法将三角形网格结点映射到平面上,用样条曲线将周边结点连接起来,得到展开视图。
The mapping problem of triangular crunodes is resolved based on the same area in the Chapter 5. The developing view can be gained when the boundary crunodes are connected by the Spline.
18. 本文讨论在非正交曲线坐标系中,粘性流矢量方程一种新的展开思路。
A new idea is suggested to extend the viscous vector equations in non-orthogonal curvilinear coordinates.
19. 介绍了塔器内梁型气体喷射式填料支承及其拱形板展开图,并通过详细计算给出了该展开图的曲线方程。
One kind of beam type gas injection packing support plate used in the column is introduced. The curve equation of the developed pattern of the arciform plate is presented.
20. 通过车体展开过程的仿真位移曲线得到实体模型的折叠比,并与理论计算进行比较分析。
The velocity and acceleration curves of corresponding poles during the deploying period and the wallop curves during the locking period are obtained, and then analyzes the influences to the rover.
21. 通过车体展开过程的仿真位移曲线得到实体模型的折叠比,并与理论计算进行比较分析。
The velocity and acceleration curves of corresponding poles during the deploying period and the wallop curves during the locking period are obtained, and then analyzes the influences to the rover.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
