
词语导航
基本信息
词语:控制淬火
繁体:控制淬火
拼音:kòng zhì cuì huǒ
英语翻译
【机】 controlled quenching
分词翻译
控制的英语翻译:
control; dominate; desist; grasp; hold; manage; master; predominate; rein
rule
【计】 C; control; controls; dominance; gated; gating; governing
【医】 control; dirigation; encraty
【经】 check; command; control; controlling; cost control; dominantion
monitoring; regulate; rig
淬火的英语翻译:
quench
【计】 hardening
【化】 hardening; quench; quenching
【医】 quenching
翻译例句
1. 齿轮齿形采用磨齿加工,齿面采用智能控制渗碳淬火技术,齿轮的强度高、韧性和耐磨性好。
Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
2. 大型钢板调质是热处理行业中多年来难以控制变形、淬火变形大、十分棘手的难题之一。
The quenching and tempering for large steel plate is a intractable problem as the large quenching distortion and difficult to control.
3. 调质热处理工艺对原材料、炉温控制、炉内气氛控制、淬火介质等都有严格的要求。
Quenching and tempering heat treatment process for raw materials, temperature control, controlled atmosphere furnace, quenching medium, such as strict requirements.
4. 介绍数控曲轴旋转感应淬火机床控制系统的软、硬件组成和系统设计中主要难点问题的解决方法。
The paper introduces the software and hardware of control system of NC rotary inductance quenching machine for crankshaft and solving process for main problems in generating gear with system design.
5. 复杂零件的淬火变形是不可避免的,用常规方法很难控制变形。
The quenching deformation of complex sections can not be avoided because it is not easy to control the deformation with conventional method.
6. 本文对新研制的有机聚合物淬火介质进行了成份检测控制。
This paper deals with the analysis and control of the composition of the arganicpolymer quenchants which were studied recently.
7. 对淬火介质的选择,淬火过程的控制,以及回火处理也作了介绍。
The selection of cooling medium, control of quenching process, as well as tempering treatment was also described.
8. 本文通过冷却强化、板形控制等机理研究,论述中厚板淬火控冷装备技术的进展。
Progression of the quenching and control-cooling equipment technology of plate is discussed in the paper through the mechanism study on enhancing cooling, plate shape controlling and etc.
9. 文章将对各种淬火起重机的结构、控制方式、适用性、安全方面进行简述。
This paper discourses the structure, control mode, applicability and safety performance of all kinds of quenching crane.
10. 介绍了在工件淬火转移速度和淬火介质温度控制上的一些先进技术。
Some advanced technologies about the quenching transfer speed and the control of quenching medium temperature are introduced.
11. 本文综述了第二届国际淬火和变形控制会议的论文。
In this paper, the proceedings of 2nd international conference on quenching and the control of distortion were reviewed.
12. 生产工序:所有重要的加工工序,从锻造、加工、淬火和表面处理——都是通过最先进的及其设备和严格的质量控制体系。
Production processes: all processing operations, from forging, machining, hardening and surface treatment - is the most advanced equipment and strict quality control system.
13. 通过分析凸轮轴淬火机原控制系统的缺陷,提出了有效的设计方案。
This article analyzes the defect of the camshaft quenching machine, brings forward the effective design plan.
14. 对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
15. 阐述了基于模糊自适应PID控制的钢丝绳用钢丝铅浴淬火温度测控系统的工作原理。
The paper introduced the working principle of the lead hardening temperature measuring and control system for the steel wire base on the fuzzy suitable PID control.
16. 对机床导轨表面淬火畸变的原因进行了分析,提出了控制机床导轨表面淬火畸变的措施,应用效果明显。
The reasons causing distortion of machine tool slide guide during surface hardening was analyzed and the way to reduce distortion was offered and the good result is obtained.
17. 介绍了以可编程控制器(PLC)为核心的森吉米尔轧机中间辊中频淬火控制系统的设计原理与实现过程。
The design principle and realization of quenching control system based on PLC used in Sendzimir Mill intermediate roll were introduced.
18. 为解决隧道式淬火炉炉温分布不均匀的问题,采用了高速调温烧嘴脉动燃烧控制技术。
In order to reach uniform temperature distribution in tunnel bogie hearth furnace, the technology of pulse firing control of high velocity burner with air diffusion is proposed.
19. 一种电脑控制板簧垂直淬火的装置,适用于各种车辆用板簧的淬火。
The utility model relates to a plate spring vertical quenching device controlled by a computer, which is suitable for the plate spring quenching of various vehicles.
20. 其模拟结果和实测结果吻合较好,为淬火过程实现自动化和智能化控制奠定了基础。
The identical results appeared in the experiments. It suggests that the quenching process would be established automatically and intelligently.
21. 文中推导淬火炉的热传递函数,介绍了具有一定带宽的继电器特性控制方法和STD总线单片机系统的具体结构。
Transmit fuction of heat was derived in this paper, A method of controlling characteristic with some band width and the structure of the STD BUS microcontroller w…
22. 文中推导淬火炉的热传递函数,介绍了具有一定带宽的继电器特性控制方法和STD总线单片机系统的具体结构。
Transmit fuction of heat was derived in this paper, A method of controlling characteristic with some band width and the structure of the STD BUS microcontroller was pre…
23. 即叶轮断裂是由于锻造加热时温度控制不好导致过热,在随后的淬火工序中又因加热温度过低,组织固溶强化效果差等综合原因所致。
The results show that the wheel hub cracking during radial impact testing was caused by excessive content of magnesium in the alloy as well as the overheating of the alloy during the solution process.WwW.WEnTiyi.cOm
24. 即叶轮断裂是由于锻造加热时温度控制不好导致过热,在随后的淬火工序中又因加热温度过低,组织固溶强化效果差等综合原因所致。
The results show that the wheel hub cracking during radial impact testing was caused by excessive content of magnesium in the alloy as well as the overheating of the alloy during the solution process.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
