
词语导航
基本信息
词语:粘结层
繁体:粘結層
拼音:zhān jié céng
英语翻译
【化】 bond line; tie coat
相关词条
1.bondcourse分词翻译
粘的英语翻译:
mucosity; paste; stick; viscidity【建】 mucopeptide
结的英语翻译:
congeal; form; knot; settle; vinculum; weave【医】 knob; knot; node; nodule; noduli; nodulus; nodus; noeud
层的英语翻译:
layer; region; stage; story; stratum; tier【计】 layer
【医】 coat; lamella; lamellae; lamina; laminae; layer; strata; stratum
翻译例句
1. 该结果可作为粘结层成分设计的依据。
Those results can be a foundation of the composition design of the binding layer.
2. 基片结构物包括基片层和基片粘结层。
The substrate structure comprises a substrate layer and a substrate tie layer.
3. 铺装结构中防水粘结层的设置至关重要。
It is very important to set the waterproof and cohesive layer in pavement structure.
4. 楼地面、抹灰面大面积隆起是由粘结层剪力破坏而致。
The big area of swelling floor surface and plastering floor result from the destruction of shearing stress from the adhesive layer.
5. 桥面铺装的早期损坏多是由防水粘结层的破坏诱发的。
The early damage of deck paving is mostly caused by the damage of the waterproof bonding coat.
6. 安徽省高速公路系统首次采用橡胶沥青作防水粘结层。
Anhui I province highway system firstly used the rubber asphalt waterproof adhesive layer.
7. 铺装结构中防水粘结层的设置对于混凝土桥面至关重要。
It is important to set the waterproof and cohesive layer in pavement structure on con - Crete bridge.
8. 叠层结构的输出位移因粘结层的变形而小于理论输出值;
The displacement output of multilayer was less than the theoretical output because of the deformation of the adhesive layer between each two layers of PLZT.
9. 而在高温低周疲劳条件下裂纹是在粘结层与高温合金基体的扩散层处。
However, cracks initialized in the diffusion layer between substrate and bond coat when TBCs were tested with low cycle fatigue at high temperature.
10. 在此基础上,对聚合物水泥基复合材料界面粘结层的结构模型进行了描述。
Based on the investigation results, the structure model of the interfacial bond layer in polymer cement based composite materials is described.
11. 另外在金属化层(2)和金属最终层(4)之间可提供金属粘结层(3)。
In addition, a metallic adhesive layer (3) can be provided between the metallizing layer (2) and the metallic final layer (4).
12. 疲劳破坏和粘结层破坏是环氧沥青混合料钢桥面铺装最主要的两种破坏形式。
Fatigue damage and destruction is the main two damage forms of epoxy adhesive layer of asphalt mixture of steel bridge deck.
13. 粘结层是在陶瓷层与金属基体之间的一层改善陶瓷层与基体粘结性的过渡层。
Bond coat is a kind of coating that improved the interface conjunction between the bond coat and the top coat.
14. 对新老混凝土粘结的微观机理进行了分析,认为新老混凝土粘结层呈叠层结构。
The micro mechanism of new old concrete bond is analyzed firstly, and the new old concrete is considered as a kind of layered composite material.
15. 为了评价应力吸收防水粘结层(SAWI)的抗反射裂缝能力,对其进行了性能试验。
In order to evaluate the reflection crack resistance of stress-absorbing waterproof interlayer (SAWI), some performance tests were carried out.
16. 由于蠕变和应力松弛的影响,粘结层应变不可逆地增加,使TGO层的界面形貌出现起伏。
Impacted by creep and stress relaxation, the strain of bond coat layer increases irreversibly, and the TGO layer convolutes .
17. 其次,通过室内试验,系统研究了环氧沥青的各项力学性能,并与其他防水粘结层做比较。
Secondly, the performance of epoxy asphalt and other water-proof binder coat was studied with laboratory experiment.
18. 村镇住宅;建筑节能;夹芯式保温屋面板;防水砂浆; 批荡网;粘结层;硅酸钙板;
Rural Buildings; Building energy saving; Sandwiched insulation roof panel; waterproof mortar; steel mesh; bonding layer; calcium silicate board.
19. 该文介绍了钢桥面铺装出现的主要病害,分析了病害出现的原因,指出钢桥面铺装中粘结层材料是关键。
Then it was pointed out the adhesive layer material is one of the key techniques for the long-span steel bridge pavement.
20. 试验结果表明:防水粘结层类型对层间抗剪强度影响显著,而试验采用的级配对层间抗剪强度影响很小。
The results indicate that waterproof binding course influences shear strength and performance of waterproof significantly, and mix design gradation has no effect on shear strength.
21. 基于环形行波型超声马达定子振动有限元模型,详细分析研究了粘结层对超声马达定子振动特性的影响。
In this paper, the effect of adhesive on the vibration of the stator in ultrasonic motors was investigated in details.
22. 金属粘结层与陶瓷涂层均呈层状结构,陶瓷涂层致密性较差、易出现微裂纹,金属粘结层相对致密、一般无裂纹。
Both the metal bond coat and the ceramic coat display a laminar structure. The ceramic coat shows less density and there exists some cracks frequently, whereas the bond coat denser and no cracks.
23. 忽略粘结层影响的情况下部分覆盖圆形压电单晶执行器挠度模拟误差明显大于半覆盖圆形压电单晶执行器挠度模拟误差;
The predicted deflection errors for the partially covered CPUA by the deflection model neglecting the bonding layer are obviously larger than those for the half covered CPUA.
24. 首先,在广泛调查了桥面铺装损坏类型及损坏原因的基础上,本文提出了桥面铺装对防水粘结层和铺装层混合料的技术要求。
Firstly, basing on the investigation of damage styles and reasons of deck pavement, the paper presents the technical requirements of water-proof binder coat and deck pavement.
25. 采用SBR改性乳化沥青、SBS改性沥青和日本环氧粘结剂三种层间粘结剂,利用直剪试验和拉拔试验进行层间抗剪性能分析,可以推荐出适合不同条件的粘结层材料。
Adhesive layer materials for different conditions may be recommended by using of direct shear test and pullout test with SBR modified emulsion asphalt, SBS modified asphalt and Japan epoxy binder.
26. 为了取得很好的粘结,粘结剂必须能克服表面粗糙和边界层的反应。WWw.WEntIYI.CoM
For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.
27. 分析认为,济钢大板坯连铸机出现粘结漏钢的原因是保护渣的性能不良,其中液渣层厚度、渣耗量及玻璃相比例偏低,以及结晶器液面波动,拉速提升过快等。
Analysis consider that the reason of breakout by sticking is bad capability of the powder, such as lower depth of liquid powder, less consumption and low proportion of glass phase in the powder.
28. 磨损过程为先粘结再擦伤,最后镀金层被磨穿。
The process of wear was from adhesive to abrasive, the gold plating was worn out at last.
29. 磨损过程为先粘结再擦伤,最后镀金层被磨穿。
The process of wear was from adhesive to abrasive, the gold plating was worn out at last.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
