
词语导航
基本信息
词语:预硫化
繁体:預硫化
拼音:yù liú huà
英语翻译
【化】 precure; prevulcanization
相关词条
1.prevulcanization分词翻译
预的英语翻译:
beforehand; in advance【医】 fore-
硫化的英语翻译:
vulcanization【化】 cure; sulfofication; sulfurization; sulphidizing; vulcanization
xanthation
【医】 sulfurize
翻译例句
1. 介绍辐射预硫化在子午线轮胎生产中的应用。
The application of radiation prevulcanization in radial tire production was introduced.
2. 我公司专业生产预硫化工程胎胎面胶、中垫胶;
We are specializes in manufacturing precured tread rubber tires works, in the rubber pad;
3. 为获得理想的预硫化效果,必须严格控制各阶段的反应条件。
In order to obtain the ideal presulfiding effect, the conditions of various stages should be controled strictly.
4. 研究了新型固体硫化剂硫代硫酸铵对加氢脱硫催化剂的预硫化。
Ammonium thiosulfate as a novel sulfiding agent was used for desulfidation of hydrodesulfurization ( HDS) catalysts.
5. 预硫化催化剂的表征结果表明,催化剂硫化前后孔容和比表面积变化不大。
The characterization of pre-curing catalyst show that the pore volume and specific surface area had little change after vulcanization.
6. 实验结果表明,用膨胀床器外预硫化工艺对加氢催化剂进行硫化是可行的。
The results showed that it was feasible to sulfurize hydrotreating catalyst ex-situ by expansion bed process.
7. 工厂专注生产预硫化胎面胶、补片、硫化罐密封胶条、磨片磨具等翻胎用配件。
Xinkeyi specializes in production of precured tread rubber, tire patch, grinding equipment, etc of retread with accessories.
8. 加氢催化剂的预硫化是提高催化剂活性、优化加氧催化操作,获得理想经济效益的关键技术之一。
Presulfuration of hydrogenation catalyst is an essential technology, which can enhance the catalyst activeness and optimize operation of hydrogenation catalysis and obtain ideal economic efficiency.
9. 对比了天然橡胶衬里、氯丁橡胶衬里、预硫化丁基橡胶衬里、室温自硫化丁基橡胶衬里的技术优缺点。
The technical advantages and disadvantages of natural rubber liner, chloroprene rubber liner, precuring butyl rubber liner and room temperature self-vulcanization butyl rubber liner are compared.
10. 在相同工艺条件下对比评价结果表明,用EPRES技术制备的器外预硫化催化剂的加氢活性比常规器内硫化的同一催化剂好。
The test results showed that hydrotreating activity of ex-situ presulfided catalysts was superior to that of in-situ sulfided catalysts.WWw.WENTIYI.CoM
11. 新科亿具有十几年的预硫化胎面胶及轮胎翻新配件的生产经验,引进先进的工艺和设备,与国内众多大型轮胎翻新生产企业保持合作关系。
Xinkeyi with more than 10 years of retread rubber production and application of experience, introduce advanced technology and equipment, have the cooperation relations with many tires enterprise.
12. 此系列机型用于空气弹簧成型用,成型各种形状,不同规格汽车、火车空气弹簧硫化前的预成型。
This series machine type is used for air spring forming to form various shapes, and for preforming of different specifications of automobiles, trains air spring before vulcanization.
13. 以硫化铜矿物为研究对象,在添加氯盐的酸性体系中,开展了黄铜矿加温、加压预氧化浸出过程研究。
Taking copper sulphide mineral as study objects, the studies of chalcopyrite heating and pressure pre-oxidation leaching process were conducted in acid system adding chloride.
14. 金属骨架经喷砂或表面化学处理并用溶剂清洗之后,涂FR 1型粘合剂,经预烘干后与橡胶进行热硫化粘着,效果良好。
After blasting or surface treatment chemically and cleaning by solvent, the metal insert was plated FR1, predried, then adhered by thermal cure, a good effect was gained.
15. 建立了常压预浸合金硫化镍矿的氧化浸出数学模型,并进行了验证试验。
The leaching performance of the low grade molybdenite from Jinduicheng Mine is investigated by both bioleaching and chemical oxidation leaching process.
16. 建立了常压预浸合金硫化镍矿的氧化浸出数学模型,并进行了验证试验。
The leaching performance of the low grade molybdenite from Jinduicheng Mine is investigated by both bioleaching and chemical oxidation leaching process.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
