单体配比用英语怎么说,单体配比的英文翻译


词语导航

基本信息

词语:单体配比

繁体:單體配比

拼音:dān tǐ pèi bǐ

英语翻译

【化】 monomer ratio

分词翻译

单体的英语翻译:

monomer
【化】 monomer
【医】 monomer; monosome; morphon

配的英语翻译:

be qualified; compound; match; mate; mix

比的英语翻译:

compare; compete; ratio; than
【医】 proportion; ratio
【经】 Benelux; benelux customs union; benelux economic union

翻译例句

1. 研究了单体配比、发剂用量、合反应温度对助洗性能的影响。

The effect of monomer ratio, initiator amount and reaction temperature on performance of builder detergent are studied.

2. 研究了单体配比、增粘剂种类、增粘剂用量对剥离强度的影响。

The effect of monomer ratio, the kind and concentration of keying agent on adhesion strength is also studied.

3. GPC测定结果表明,分子量在合适的单体配比下出现最大值。

The analytical result by GPC indicates that the maximum of molecular weight occurs at the proper monomer ratio.

4. 此外,超微胶乳涂膜的性能与单体配比、加氨量和剪切时间都有关。

The performance of micro-latex membrane was affected by the monomer ratio, the amount of ammonia and shearing time.

5. 详细分析了主单体配比、辅单体用量、引发剂用量对树脂性能的影响。

The influence of the amounts of main monomers, auxiliary monomers and initiator to the performances of resin is discussed.

6. 单体配比、CPE用量、溶胀时间、转化率及硫醇用量等均有影响。

The monomer ratio, CPE content, swelling time, conversion and the amount of mercapt…

7. 探讨了单体配比、反应温度、分子量调节剂等对共聚物阻垢性能的影响。

The effects of monomer ratio, reaction temperature and molecular weight regUlator on the scale preventing in cooling water were died.

8. 考察了单体配比、加料方式、引发剂与乳化剂的用量对产品性能的影响。

The effects of the composition of monomer, the way of feeding, the amount of initiator and emulsifier on the performance of the product are discussed.

9. 探讨了单体配比、乳化剂配比、引发剂等对聚合反应以及涂膜性能的影响。

This article has discussed the influence of ratio of monomers, emulsifier mixing ratio and initiators on the polymerization reaction and the film properties.

10. 讨论了环氧树脂的选择、混合方式、单体配比、树脂分子量和漆膜交联度等问题。

The selection of resins, mixing process, monomer ratio, molecular weight of the resin and film crosslinking density were discussed.

11. 考察了反应条件对共聚反应的影响,结果发现控制单体配比可以调节共聚物的组成。

Effects of reaction condition on copolymerization were explored. The results indicate that the composition of copolymer was controlled by changing the composition in feed monomer mixture.

12. 研究了引发剂浓度、单体浓度、单体配比、聚合温度和聚合时间对共聚反应的影响。

Effects of initiator concentration, monomer concentration, monomer ratio, polymerization temperature and polymerization time on copolymerizations were investigated.

13. 通过讨论单体配比、合成温度、聚合时间以及引发剂的类型和用量对树脂性能的影响;

The influences of the composition of monomers, the polymerization temperature, and time on the performance of resin were investigated.

14. 研究了聚合过程中的反应条件,如交联度、中和度、温度、单体配比等对吸收性能的影响。

The influences of reactive conditions such as crosslinking degree, neutral degree, temperature and monomer proportion to the absorbency were investigated.

15. 同时讨论了共聚物单体配比、PEG分子量、PEG与马来酸酐的投料比与酯化产物的性能关系。

The relationship between the factors such as the molecular weight of copolymer and PEG, the proportion of monomers and PEG, have been discussed.

16. 研究了单体配比、引发剂用量、交联剂用量、溶剂种类及反应温度等因素时吸油性树脂性能的影响。

The effects of the amount of initiator, crosslinker used, monomer composition, kinds of solvents, and re-action temperature on the oil absorption capacities of copolymers were studied.

17. 研究了反应温度、引发剂浓度、单体配比对共聚物组成的影响,分析了共聚物组成随转化率的变化规律。

The effects of reaction temperature, initiator concentration and monomer ratio on copolymer composition were studied, the law of copolymer composition changing with monomer conversion was discussed.

18. 并且讨论了软、硬单体配比,宫能单体含量及乳化剂用量等因素对压敏胶粘度、快粘力、持粘力、剥离强度等性能的影响。

The effects of propdrtion of soft and hard monomer, the content of functional monomer and emulsifier on the viscosity, ball tack and hold tack, peeling strength of adhesives were discussed.

19. 实验测得随着丙烯酸钠单体配比从0增加到33%,能够沉淀聚合丙烯酰胺的临界柠檬酸钾浓度从32.10%提高到61.90%。

It is mensurated that the critical salt concentration of potassium citrate is from 32.10% to 61.90% as monomer ratio increase from 0 to 33%.

20. 系统研究了复合乳化剂配比及用量、聚合温度、聚合方式和官能团单体含量对共聚物乳胶粒径及其分布的影响。

Influence of compound emulsifier"s ratio and amount, reaction temperature, polymerization types and functional monomer amount on the emulsion resin particle size and its distribution were studied.

21. 探讨了单体质量配比、 引发剂用量和反应温度等关键因素对压敏胶性能的影响。

The influences of key factors such as monomer mass ratio, amount of initiator, and reaction temperature on properties of the adhesive were investigated.

22. 研究了共聚物的反应温度、单体的配比、引发剂种类与用量、交联剂用量对吸水率的影响。

The influence of the cross-linking agent amount, initiator and its amount, reaction temperature and monomer ratio time on the water absorbency of the graft copolymer were investigated.

23. 本文选用不同的单体及配比对酪素进行了改性。

This paper studied the modification of casein by different monomers and ratios.Www.wEntIYI.COM

24. 控制项目主要包括进料量、反应温度、催化剂用量及配比、单体转化率、聚合物门尼粘度控制。

The controlled items mainly consist of feed quantity, reaction temperature, catalyst usage and ratio, conversion rate and polymer Mooney viscosity.

25. 本文研究了与魔芋胶复配的单体胶的种类及最佳配比区域。

The kinds and ratios of single gum in combination with konjac gum(KM) were investigated.

26. 采用动态激光光散射研究了接枝单体及水与丙酮的配比对胶束尺寸的影响。

The influence of the monomer, the ratio of water and acetone on the micelle size was investigated by dynamic laser light scattering.

27. 研究了不同质量比的单体、自交联单体以及固化剂与树脂的不同配比对涂料涂膜性能的影响。

The influence of different mass ratio of monomers, self-crosslinking monomers and various ratio of curing agent and resin on coating film"s properties were studied.

28. 研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。

The effects of the amount of initiator, crosslinker and monomer composition on the oil absorption capacities of copolymer were studied.

29. 通过配方试验设计的方法,确定了混合预聚物及混合单体的最佳配比,优化了水性UV光油的最佳配方。

By changing the type and proportion of pre-polymer, monomer, photo-initiator and promoter, the performances of water-base UV varnish were studied.

30. 通过配方试验设计的方法,确定了混合预聚物及混合单体的最佳配比,优化了水性UV光油的最佳配方。

By changing the type and proportion of pre-polymer, monomer, photo-initiator and promoter, the performances of water-base UV varnish were studied.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!