组装工艺用英语怎么说,组装工艺的英文翻译


词语导航

基本信息

词语:组装工艺

繁体:組裝工藝

拼音:zǔ zhuāng gōng yì

英语翻译

【计】 packaging technology

分词翻译

组装的英语翻译:

【计】 packaging

工艺的英语翻译:

craft; technics; technology
【计】 MOS technology
【化】 methodology
【经】 technology

翻译例句

1. 生产工艺、加工工艺与组装工艺的制定。

Production technology, processing technology and assembly process development.

2. 文章对QFN器件的焊盘设计,网板设计及组装工艺作了详细的介绍。

In this article, bonding pad design, stencil design and assembly process of QFN device will be introduced in detail.

3. 介绍了70%低地板轻轨车车体结构特点、总组装工艺及部分工艺装备。

Described are the structure features, total assembly technology and some technological equipment for 70% low floor, light rail car-bodies.

4. 屋盖在地面组装工艺复杂,整体提升难度大,质量安全监督方面面临挑战。

For the roof assembling technique under ground was complex and the integral lifting was high difficult, much challenge was placed on the quality and safety supervision.

5. 着重介绍了渭河大化工程中的关键设备中压蒸汽过热器管箱堆焊和组装工艺。

The Beading and assembling process of IP superheater for Weihe project are introduced in detail.

6. 介绍了该新型承压快开门结构的设计要点、工作原理和组装工艺要点及应用效果。

The structure working principle, designing and installing points and application effects of this new mechanism were also described.

7. 包括背景,焊料,表面镀层,元器件,基板,组装工艺,返工和无铅焊接的可靠性。

It covers the background, solders, surface finishes, components, substrates, assembly processes, rework, and reliability of lead-free soldering.

8. 论述了封装结构、工艺流程及封装可靠性,并阐述了板级组装工艺过程和互连可靠性。

The package construction, process flow, and package reliability are described, together with board level assembly processes and interconnect reliability.

9. 电子仪器整机的高可靠性是由组成它的各单元电路及其组装工艺的高可靠性来提供保证。

The overall reliability of electronic instruments is assured by the reliability of their unit circuits and their assembly technology.

10. 微波立体组装工艺是实现微波组件小型化、轻量化、高组装密度和优良电气性能的有效途径。

Microwave volume packaging technologies are effective methods for realizing microwave modules miniaturization and weight reduction with high density and good performance.

11. 本文介绍了超细长比的大型列管式固定管板换热器管系构架组装,穿管和管系与壳体组装工艺。

The report introduces fabricating and assembling process of fixed tube sheets type heat exchanger including tube bundle and shell, tubes passing through tube-sheets , etc.

12. 通过采取适当的焊接、热处理及组装工艺,较好地完成了这台换热器的制造,保证了产品质量。

It has been finished this heat exchanger well by adopted reasonable welding, treatment and procedure of fixing, and ensured the quality of product.

13. 箱型柱制作质量是箱型柱质量的关键,介绍了箱型柱制作的关键工序——隔板的加工组装工艺。

This paper presents the key working procedure of box column making — technique for processing and assembling of the clapboard.

14. 在叠层的组装工艺中,比如基板- 焊片-芯片,即使有部分表面被盖住了,这种气氛同样有效。

This is also preformed on covered surfaces a stacked assembly : substrate - pre - form - die.WwW.wEntiYI.coM

15. 系统探讨了多层金属化工艺、主要衬底材料、工艺集成规则、集成无源模块组装工艺、设计方法及设计实例等关键工艺技术。

The multiplayer moralization technology, main substrate materials, the laws for integrating technologies, design methods are discussed. Some examples are given.

16. 对DF_4内燃机车抱轴瓦碾瓦故障的主要原因,从配件的加工及组装工艺进行了分析,提出了必须注意的关键点及改进意见。

This paper discussed the main cause that DF4 type diesel locomotive axle suspension bush fault happend and it put forward some advice on improvement.

17. 由于该传感器直接将地震的机械信号以脉冲数字信号输出,避免了器件精度不同对传感器输出数据质量的影响,简化了组装工艺。

Because of the direct digital pulses output of grating sensor, the influence of different precisions of the devices to data quality is avoided, and the assemblage technology is simplified.

18. 介绍了下交叉支撑转向架的结构特点和关键技术参数,对侧架导框的加工、侧架与支撑座的组焊和转向架的组装工艺等着重进行了分析。

Mainly analyzed are the technologies in processing of side frame guides, assembly by welding of the side frame and braced seat, and assembly of the bogie.

19. 基于多色集合理论,用数值围道矩阵描述了复杂PC B组装工艺流程中组装优化问题的设备资源约束和工艺约束,建立了PC B组装的优化约束模型。

Based on PS theory, numerical contour matrix was presented to describe the machine constraints and process constraints of job shop PCB assembly optimization problem and formulate the constraint model.

20. 基于多色集合理论,用数值围道矩阵描述了复杂PC B组装工艺流程中组装优化问题的设备资源约束和工艺约束,建立了PC B组装的优化约束模型。

Based on PS theory, numerical contour matrix was presented to describe the machine constraints and process constraints of job shop PCB assembly optimization problem and formulate the constraint model.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!