
词语导航
基本信息
词语:初始负载
繁体:初始負載
拼音:chū shǐ fù zǎi
英语翻译
【计】 initial load
分词翻译
初的英语翻译:
at the beginning of; early; elementary; first; original
【医】 arch-; arche-; prot-; proto-
始的英语翻译:
begin
负载的英语翻译:
load
【计】 L; load line
【化】 load
翻译例句
1. 可以轻松满足预期的初始负载。
Can easily serve the expected initial load.WWW.wENtIyi.cOM
2. 在这里,这些过滤器是设置为可选的,这样会增加仪表盘的初始负载,因为所有数据都会显示,并根据选择过滤。
These filters are made optional in this case so that upon initial load of the dashboard, all data will be displayed and subsequently filtered.
3. 直到初始的负载和性能测试。
Conduct initial load and performance tests.
4. 每个组具有初始规模,在运行时规模可能随运行时负载和自动引导设置变化。
Every group starts with an initial size and it may vary at runtime depending upon the runtime load and the autopilot setup.
5. 运行AW负载管理来传递一些初始数据进行一个事实表构建。
Run AW load management to deliver some initial data for a fact build.
6. 为此,要运行工作负载的初始化步骤;完成之后,就可以运行实际的工作负载。
To do this, run a workload"s initialization workload; when it"s finished, you can run the actual workload.
7. 它初始化springbean工厂,然后开始一个长的循环,从而将负载置于每一个bean中。
It initializes the Spring bean factory and then starts a long loop, putting load on each of the beans.
8. 用户数量以一定的基数随x轴增加时负载水平成两倍或三倍等一直到随初始用户数量的6倍增长。
The number of users starts at some base value increasing along the X-axis where the load levels are doubled, tripled, etc. on up to 6x the original number of users.
9. 工作负载视图:这是打开仪表板时的初始屏幕,会显示所有工作负载和服务器的数据,作为分析ExtendedInsight指标的起点。
Workloads view - This is the initial screen that displays when you open the dashboard. It displays data from all workloads and serves as the starting point for analyzing Extended Insight metrics.
10. 新的工作负载有两种:集群邮件初始化及集群邮件工作负载、企业邮件初始化及企业邮件负载 (Entmail)。
There are two new workloads: the Cluster Mail Initialization and Cluster Mail workload, and the Enterprise Mail Initialization and Enterprise Mail workload (Entmail).
11. 正如前面提到的,需要在运行工作负载的服务器(SUT)上创建和初始化邮件数据库。
As we mentioned previously, we need to create and initialize mail databases on the server (SUT) to run our workload against.
12. 当应用程序正在初始化或者应用程序的工作负载增加时,应用程序的内存使用自然也将增加。
The memory usage of an application will naturally increase when the application is initializing and if the workload of the application increases.
13. 在进行了合适的响应时间分解配置之后,您必须执行测试或者调度以在负载测试期间初始化应用程序监控。
After making the appropriate response time breakdown configuration, you must execute the test or schedule to initiate application monitoring during the load test.
14. 通过这种方式,负载均衡路由器只需要处理初始的客户端请求并可以发现最佳的活动网关实例来路由信息。
This way, the load-balancing router handles only the initial client requests and discovers the best active gateway instance to route traffic to.
15. 初始化步骤适用于大多数工作负载。
The initialization step is used for most workloads.
16. 对于负载量为100- 500个并发用户来说,比较适宜的Maximumconnections初始值为30。
A good starting value for Maximum connections for a load of 100-500 concurrent users is 30.
17. 本文设计的发电机检测系统由转速驱动和控制单元,数据采集单元,可程控的负载,初始励磁电源以及应用测试软件组成。
The system is composed of rotate drive and control unit, data acquisition unit, program control load, initial excitation source and measure-control program.
18. 同时讨论了电源合闸角、转子初始相角、磁链和负载转矩对电机转速和旋转方向的影响。
Influences on the speed and direction of the rotation by the phase Angle of the supply voltage, initial Angle of rotor position, PM line flux and the load torque are discussed.
19. 如果一个触点在初始变形时即屈服,负载去除后,它将不能回复到原来的形状。
If a contact has yielded during the initial deflection, it will not return to its original shape when the load is removed.
20. 确定出牵入同步时较好和较差初始功角的范围,和在不同初始功角下能够牵入同步的最大负载值。
The favorable and unfavorable initial power angle range and the maximum load torque of pulling into step with different initial angle is determined.
21. 这使得SCR来控制交流正波的一半,另一半的电压施加到在SCR初始触发该负载。
This permits the SCR to control only half of the AC positive wave; half voltage is applied to the load when the SCR initially fires.
22. 通过增加MFCG的初始电感以增加其对负载电感的比值,是获得高能量放大系数的一个有效方法。
An effective way of obtaining high energy gain of MFCG is to increase the ratio of its initial inductance to load inductance by increasing the initial one.
23. 通过对实验结果的分析,讨论了电极结构和负载初始状态对实验结果的影响程度。
Influences on electrode configuration and the initial state of pinch load were discussed by analysing experimental results.
24. 工作负载整合在初始讨论,期间很普遍滑动到思考功率消耗和机架空间。
During the initial discussions of workload consolidation, it"s common to slip into thinking about power consumption and rack space.
25. 稍后,可使用负载测试编辑器对通过使用“新建负载测试向导”为负载测试配置的初始设置进行编辑。
The initial Settings that you configure for a load test using the New load test Wizard can be edited later using the load test Editor.
26. 考察了不同的乙烯初始浓度、不同温度、不同光源和负载贵金属对光降解效率的影响。
Then the efficiency of noble metals-doped photocatalyst was compared with that of the bare one.
27. “新建负载测试向导”创建负载测试时,需添加一个初始计数器集。
New Load Test Wizard, you add an initial set of counters.
28. “新建负载测试向导”创建负载测试时,需添加一个初始计数器集。
New Load Test Wizard, you add an initial set of counters.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
