
词语导航
基本信息
词语:角杆
繁体:角桿
拼音:jiǎo gān
英语翻译
【电】 angle bar; corner pole
分词翻译
角的英语翻译:
corner; angle; cape; contend; horn; wrestle; role
【医】 angle; anguli; angulus; Broca"s angle; cornu; cornua; gonio-; horn
杆的英语翻译:
mast; perch; pole; post; shank; staff
【化】 bar
【医】 culm; lever; rhadbo-; rod; stab; staff; stick
翻译例句
1. 我要在同一时间注意观察下降率,高度,空速,攻角,还有我的驾驶杆杆位和油门。
I have to monitor sink rate, altitude, airspeed, AOA, and my stick and my throttle all at the same time.
2. 阀杆应该是六角形或方形,以确保阀瓣能够灵活旋转,并且完全密封,不会暴露在处理的液体里。
The shaft shall be hexagonal or square to ensure positive rotation of the disc and be totally sealed from exposure to the process liquid.WWW.wENtiYi.COM
3. 并讨论了横向稳定杆角刚度变化、重心位置变化对大客车操纵稳定性的影响。
The influence analysis is achieved for maneuverability and stability of the coach-bus while the angel stiffness of it"s lateral stable pole or the position of gravity center is changing.
4. 本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。
In this paper, the pressure Angle and minimal radius of curvature of CAM mechanism with swinging roller follower are discussed in details.
5. 然后详细的讨论了五杆机构在每一种分类情况下机构中存在双曲柄时机构的传动比及相位角的范围。
Then we conclude the five-bar"s classification and the gear ratio and phase Angle in each classification to be full rotatability.
6. 结构元素包括杆元、平面梁元、空间梁元、平面三角板元、平面矩形板元和弯曲矩形板元等。
Structural elements contain bar, plane beam, space beam, triangular and rectangular plates with membrane stresses, rectangular plate element with bending deformations.
7. 然后,针对能够整周转动的齿轮—五杆机构,研究了其上的一点在齿轮机构的传动比、初始相位角、杆长以及两杆之间的夹角变化时的轨迹曲线以及速度和加速度曲线的情况。
Then the locus curves of one point in the geared five-bar were studied with the change of the gear ratio, the phase Angle, the bar length and the Angle between two bars.
8. 采用离散单元法,分析了当荷载、岩体的摩擦角、锚杆间距、锚杆方向和岩体的性质变化时,顶板的稳定性。
Discrete element method is used to analyze the roof stability in accordance with the variation of its loading, rock frictional Angle, bolt spacing, rock properties and bolt orientation.
9. 该模型的拓扑结构可以是任意型式,允许包含四边形单元、三角形单元和梁(杆)单元。
The model may be various non-simple topological structures and contain any combinations of beams, triangular elements and quadrilateral elements.
10. 在塔博杯中加满冰块,把所有成分依次倒入其中,用芹菜杆轻轻搅动后,用青柠角装饰。
Combine ingredients in a tumbler glass filled with ice. stir gently with celery stick. garnish with lime wedge.
11. 提出用拉深区速度波动量、拉深速度、拉深深度、拉深角为评价压力机八杆内滑块机构性能优劣的指标。
This paper addresses that speed fluctuation amount of drawing area, drawing speed, draw depth, draw Angle shall be used as the indexes to evaluate the performance of the inner sliding block mechanism.
12. 如果扭矩和单位长度上扭角沿杆件为常量,则上述的结论也可以用于扭矩。
Similar comments apply to torsion if the torsional moment and twist per unit length are constant throughout a member.
13. 本文从曲柄滑块机构中各杆件组成的三角形面积观点出发,分析了曲柄滑块机构中各参数与其面积的内在联系,从而得出相关参数的设计准则。
Based on the area of a triangle, the paper analyses the interior connection between crank structure and areas of triangle, then provides the design rules for its data.
14. 重型自卸汽车设计中经常选用三角臂组合式倾卸机构,应用的是铰链四连杆机械运动工作原理。
The moving theory of four bar linkage is often used to analyze the triangular arm unloading mechanism of dump truck.
15. 本文分析了试验过程中摆杆形变对柔性接头摆心、摆角数据的影响。
This paper analyzes the influence on the pivot point and deflection angle from the pendulum shaft"s deformation in course of the test.
16. 通过计算机辅助分析,求得了该点压力角的变化规律及给定杆系参数下压力角的最佳变化区间。
The changing regularity of pressure angle of ball joint and the optimum position region of pressure angle in given rod structure were proved through computer aided analysis.
17. 作者对6130Q柴油机喷油泵,在稳定工况和变速工况中,进行了齿杆位移和供油提前角等运动规律方面的测试研究。
Dynamic behaviors of fuel injection pump control rack displacement and injection advance were studied experimentally on a 6130Q diesel engine at both steady and transient conditions.
18. 运用该软件研究各个杆件尺寸以及偏差对机构运动的影响,从而确定下三角滑块结构双连杆双曲轴运动机构方案。
Based on the analyse the structure characteristic, the software is developed with C-H-Builder, which can be applied to study the influence on the motion from dimension and tolerance.
19. 用华丽的三角支架装饰吊衣杆的尾端。
Bookend your closet rods with fancy shelf brackets.
20. 作者推导了该空间四杆机构中的压力角公式及其简化公式。
The author has derived a formula for the pressure Angle and a simplified formula for such a spatial four-bar linkage.
21. 根据四杆机构的杆长关系,具体给出了最小传动角的准确位置。
According to relationship between the length of the linking rods of the four link mechanism, the paper proposes an accurate location of the minimum transmission Angle.
22. 从球面三角理论出发,对球面四杆机构构件扭角和机构回路的关系进行分析;
Starting off from the theory of spherical triangle, an analysis was carried out on the relation between component twist angle of spherical four-bar linkage and circuit of mechanism.
23. 为了解斜撑对整个支护结构的作用,采用杆系有限元方法分析了角撑位置和刚度对支护结构内力和变形性状的影响,可供从事基坑支护的工程技术人员参考。
The member finite element method (FEM) is adopted to analyze the effect of corner brace on the behavior of retaining structure, and it has some referential value for engineers.
24. 在大多数的使用情况下,四杆曲线同源机构与原始机构具有相同的传动角。
In many cases, transmission angles of cognate mechanism and original mechanism are identical.
25. 在果蝇这种较精密的复眼中,感杆小体彼此相隔,因此果蝇复眼的角分辨率显著提高,能够探测到较微小的运动物体。
In the more sophisticated eyes of flies, the rhabdomeres are separated, and as a result, fly eyes have significantly better angular resolution, and can detect smaller moving objects.
26. 由这一方法导出了平面杆机构惯性力部分平衡配重大小及方位角的简单计算公式。
From this method a simple formula is derived. This formula be used to calculate the magnitude and trim Angle of the balancer.
27. 较小的杆,当时执意要的形状和连接到伺服非洲之角本身。
The smaller rod was then bent to shape and attached to the servo horn itself.
28. 较小的杆,当时执意要的形状和连接到伺服非洲之角本身。
The smaller rod was then bent to shape and attached to the servo horn itself.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
