裂化渣油用英语怎么说,裂化渣油的英文翻译


词语导航

基本信息

词语:裂化渣油

繁体:裂化渣油

拼音:liè huà zhā yóu

英语翻译

【化】 cracked residue; cracked residuum

相关词条

1.crackedresidue  

分词翻译

裂的英语翻译:

crack; rend; split
【医】 cleavage; cleft; crena; crenae; diastem; diastema; fissura; fissure
gap; rictus; rima; rimae; schistasis; schisto-; schizo-

化的英语翻译:WWw.wentiYI.coM

burn up; change; convert; melt; spend; turn

渣油的英语翻译:

【化】 final residuum; non-distillate oil; residual oil; residuum

翻译例句

1. 延迟减粘是浅度热裂化渣油减粘工艺。

The postponable reduced viscosity process is a thermal cracking one of shallow degree of residual oil.

2. 以石油系催化裂化渣油为原料,调制出可纺性的中间相沥青,并纺出均匀的中间相沥青纤维。

Spinnable mesophase pitch was prepared from catalytic cracking residue of petroleum and uniform mesophase pitch carbon fibre (MPPCF) was obtained.

3. 通过对大庆热裂化渣油、新疆天然沥青两种典型试样在热转化时中间相转化过程的考察,初步探讨了中间相形成的一般规律。

Thermal pyrolysis of Daqing thermal tar and Xinjiang natural bitumen at various tempertures were studied with the purpose of investigating the mesophase transformation.

4. 另外,调节空气流量以达到一个合理的焦碳收率,还能提高裂化热到与渣油操作相符的范围。

Additionally, adjusting the air flow to achieve a reasonable coke yield also increased the heat of cracking into a region also consistent with residual operation.

5. 介绍新开发的低焦炭产率渣油裂化催化剂(CC-16)的物化性质和反应性能。

The physicochemical properties and reacting performance of the newly developed residue FCC catalyst CC-16 was introduced .

6. 介绍了新型(BY型)高效旋风分离系统在渣油催化裂化装置上的应用情况。

This paper introduced the application of new type (BY) high efficient cyclone separation system in residual fluid catalytic cracking unit.

7. 结果表明,二烯值大、酚含量低是加氢渣油催化裂化汽油诱导期短的主要原因。

Results show that the main causes of low induction period of cracked naphtha are the high diene number and low phenol content.

8. 文中并列出了各种重质原油的汽油、柴油、催化裂化原料及渣油的主要性质。

The main properties of naphtha, diesel fuel fractions, catalytic cracking feed stock and residua from these crudes are also listed.

9. 因此,渣油催化裂化宜采用短接触时间和快速油气分离技术。

So the techniques of short contact time and quick speed oil gas separation in residua catalytic cracking should be taken.

10. 介绍了渣油溶剂脱沥青-脱油沥青气化-脱沥青油催化裂化组合工艺的研究及应用情况。

The article introduces research and application situation of solvent deasphalting-deoiling asphalt gasification-deasphalting oil FCC group technology.

11. 以两种渣油裂化催化剂为例,讨论了在渣油裂化催化剂研制中应如何考虑它们的共性与特性。

The generalities and specialities of residual cracking catalysts in their preparation were discussed with examples of two residual cracking catalysts.

12. 将胜利减压渣油中的胶质与饱和分、芳香分以及减压馏分油加氢裂化(SSOT)尾油中的石蜡进行调合。

The resins of Shengli vacuum residue were blent with saturates, aromatics from Shengli vacuum residue and paraffin from SSOT hydrogenation residue.

13. 采用均匀设计实验方案,进行了渣油悬浮床中压加氢裂化工艺研究。

Residuum suspended bed hydrocracking process at medium pressure was studied by using homogeneous design experimental project.

14. 介绍了齐鲁石化公司引进的减压渣油加氢脱硫装置生产及催化裂化装置掺炼其产品蜡油和渣油的情况。

The operation of vacuum residue hydrodesulfurization unit imported by Qilu Petrochemical Company and FCCU which processes the obtained VGO and residue as mixed feedstock was discussed.

15. 分析了孤岛渣油在分散型磷钼酸铵催化剂存在下加氢裂化反应产物的性质。

The properties of the hydrocracking products of Gudao residue in the presence of dispersed ammonium phosphomolybdate catalyst were studied.

16. 还从理论和技术上,分析比较了减压渣油和催化裂化油浆在焦化反应中的产品收率分布的区别,支持了经济效益的分析结论;

The differences in product yields and slates of processing vacuum residue and FCCU slurry in delayed coking are analyzed, which support the conclusion of economic analysis.

17. 并对目前渣油催化裂化工艺有待开发的技术领域进行了讨论。

The ideas for further development of the residuum catalytic cracking reaction technology according t...

18. 介绍了抚顺石油化工研究院渣油悬浮床加氢裂化均相催化剂及工艺的研究进展。

The progresses in both homogeneous catalyst and process for residue suspended bed hydrocracking developed by Fushun Research Institute of Petroleum and Petrochemicals (FRIPP) were introduced.

19. 介绍了作者新研制的用于掺渣油催化裂化研究的同轴式催化裂化实验装置。

A pilot orthoflow catalytic cracking unit suitable for investigations of the residumblending catalytic cracking process was developed by our researching group.

20. 因此渣油加氢-催化裂化组合工艺是加工含硫渣油的较佳选择。

So residue hydrotreating - catalytic cracking combined process is a good selection for processing sour residual oil.

21. 并对目前渣油催化裂化工艺有待开发的技术领域进行了讨论。

The ideas for further development of the residuum catalytic cracking reaction technology according to the problems of commercial riser were discussed.

22. 以新疆减压渣油中掺入不同比例的重油催化裂化油浆为原料,在超临界流体萃取分馏装置上,进行丁烷脱沥青试验。

Solvent extraction experiment has been done, in which the feedstock of xinjiang vacuum residue was mixed with RFCC slurry by the method of Supercritical Fluid extraction and Fractionation (SFEF).

23. 介绍了抚顺石油化工研究院开发的渣油悬浮床临氢减粘裂化工艺及添加剂。

The residue slurry visbreaking process and related additives developed by sinopecFushun Research Institute of Petroleum and Petrochemicals (FRIPP) were described.

24. 各种组合工艺的运用为重油催化裂化提供了优质原料,提高了渣油加工深度,增强了企业的应变能力和经济效益。

The use of integrated process provides more qualified feedstock for RFCC, increases the yield of light oil, and enhances the economic benefit of refineries and adaptability of crude oil.

25. 通过红外光谱及紫外可见光谱分析了悬浮床加氢裂化助剂对辽河常压渣油沥青质的作用。

The effect of adjuvant on Liaohe atmospheric residue(LHAR) asphaltene in slurry-bed hydrocracking was studied by means of FT-IR and UV-Vis.

26. 催化加氢处理是渣油裂化加工的重要技术,但焦炭和金属在催化剂上的沉积将降低催化剂的活性。

Catalytic hydro-processing is an important technology for residue oil upgrading, but the catalysts are easy to be deactivated due to the deposition of coke and metals on the catalyst surface.

27. 本文重点评述了馏分油加氢裂化、缓和加氢裂化、渣油加氢裂化、加氢精制和加氢处理技术的新进展。

The recent advances in hydrocracking, mild hydrocracking and resid hydrocracking and hydrotreating technologies are reviewed in this paper.

28. 通过常压重油加氢处理或减压渣油加氢处理工艺将劣质的常压重油或减压渣油加工成适用于重油催化裂化装置的原料油,从而最大限度地获得更多的轻质燃料油。

Through hydrotreating, the poor-quality long residue or short residue from CDU can be up-graded in-to good feedstock for heavy oil FCCU. Therefore, the production of light fuel oil can be maximized.

29. 采用不同的分散方式及分散方法,考察了辽河稠油渣油混合油加氢裂化水溶性催化剂的分散行为,建立了分散性能参数来评价水溶性催化剂在重油中的分散效果。

The dispersion behavior of water-soluble catalyst for hydrocracking of Liaohe heavy oil and residue mixture was studied by different dispersion modes and methods.

30. 对渣油的特点、渣油催化裂化面临的问题及传统提升管反应器的弊端进行了讨论。

Residue features, problems faced with RFCC and the disadvantages of traditional riser reactor have been discussed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!