半固态的用英语怎么说,半固态的的英文翻译


词语导航

基本信息

词语:半固态的

繁体:半固態的

拼音:bàn gù tài de

英语翻译

【计】 semi-solid

分词翻译

半的英语翻译:

half; in the middle; semi-
【计】 semi
【医】 demi-; hemi-; semi-; semis; ss
【经】 quasi

固态的英语翻译:

solid state
【计】 solid state

翻译例句

1. 半固态的物质,如污水处理后沉淀下来的那种物质。

Semisolid material such as the type precipitated by sewage treatment.

2. 一种用于制造粘性的或半固态的产品的方法和设备。

A method and device for manufacturing a viscous or semisolid product.

3. 从非枝晶坯料的制备、坯料的重熔加热和半固态的成形工艺等三方面介绍镁合金半固态成形的研究现状。

The present status of the research of Mg alloy semi-solid processing from three aspects including the preparation of non-dendritic structure, reheating and semi-solid processing were described.

4. 半融雪通过一种未知的物理过程被压实,而固态、无气泡的冰是由富含可溶性有机物的水形成的。

The slush is compacted by an unknown mechanism, and solid, bubble-free ice is formed from water high in soluble organic substances.

5. 研究方法和主要成果如下:使用电阻炉熔炼a356铝合金,并采用斜坡冷却法进行半固态熔体的制备。

Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.

6. 该模型形式简单,能够较好地描述半固态合金的变形行为。

It has been proved to be a simple model, which can represent the deformation behavior of semi-solid alloys.

7. 在室温下,最终的植物油产品呈现半固态。

The final vegetable oil product will be a semi-solid ingredient at ambient temperatures.

8. 应用自蔓延技术制备了带有陶瓷内衬涂层的模具,并应用该模具进行了简单的半固态铝合金加工实验。

A die with internal lining ceramics coat was made by using this technology. Then a semi-solid aluminum alloy forming experiment was made in the die.

9. 半固态金属加工技术被认为是21世纪最具有发展前途的近净成形技术之一,其关键环节是半固态浆料的制备。

Semisolid metal processing technology is regarded as one of the near-net shape forming technologies with wide application in 21 century, and the preparation of semi-solid slurry is the key technique.

10. 半固态金属具有良好的流动性,易于通过普通加工方法制成产品,并且具有加工温度低,产品质量高等优点。

Semi-Solid Metal shows good flowable behaviour so that it could be manufactured easily by general working methods, and it also has some advantages such as low working temperature, high quality etc.

11. 在半固态挤压成形过程中,随着成形温度的升高,镁合金半固态浆料的流变性改善。

With the rise of temperature in squeeze process, the Theological property of semi-solid magnesium alloy slurry was improved.

12. AZ 91d镁合金半固态液相的凝固方式与冷却速度所决定的过冷度有重要关西安理工大学硕士学位论文系。

The solidification modes of liquid phase of semi-solid AZ91D Mg alloy were in close relationship with the degree of supercooling determined by cooling rate.

13. 研究了控制熔体结晶法制备的半固态zl101合金的压缩变形行为以及显微组织的变化。

Compression experiments were carried out to investigate deformation behavior and microstructure of semi-solid ZL101 alloy fabricated by controlled crystallization technique.

14. 综述了目前国内外镁合金半固态成形技术的研究及其应用现状,展望了镁合金半固态成形技术在我国的发展前景。

The research prog ress of semi-solid forming magnesium alloys at present was reviewed in this paper, and the prospect of its industrial application was viewed.

15. 研究了AZ91D镁合金在不同半固态温度下的挤压铸造。

The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.

16. 半固态铸造是一种新的材料成形技术,采用半固态铸造技术成形可以实现产品的低成本、高产出及高质量。

Semi-solid casting is a new kind of materials forming technique, the products having low cost, high production rate and high quality can be obtained using semi-solid casting technique.

17. 研究结果表明,适当的感应加热工艺能满足金属半固态成形技术中的二次加热的技术要求。

Result of research shows that proper technology of induction heating satisfies the technologic request in semi-solid metal forming.

18. 在所有半固态镁合金试验中,水淬试样的晶粒密度都大于重力铸造的金属型试样的晶粒密度。这表明在半固态成型过程中,晶粒有很强的长大合并的趋势。wWw.WEnTiYi.com

The density of the quenchinching samples was higher than that of the metal-mould ones and the grains were much easier to grow and merge in the shaping of the semi-solid alloys.

19. 随变形温度的不同,半固态ZA27合金呈现不同的变形机理。

The shaped mechanism of semi-solid ZA27 alloy is changed along with different shaping temperatures.

20. 采用包套挤压成形方法,成功地实现了不锈钢与半固态铝合金的连接与成形。

By using sheathed extrusion technique, the bonding and forming of stainless steel and semi solid aluminum alloy are successfully realized.

21. 半固态铝合金初生相是在合金的凝固过程中产生的,球状初生相的形成与半固态加工工艺密切相关。

The primary phase in semi-solid al alloy is formed during solidification of alloy, and the formation of primary phase with globular-like is closely related to semi-solid processing.

22. 本文综述了半固态成形的基础理论研究,概述了目前国内外半固态技术的应用现状及其研究进展。

This paper summarizes the basic theory of semi-solid forging, and the research progress of semi-solid forging at present and also industrial applications are analyzed and discussed.

23. 研究了浇注温度、搅拌功率和搅拌时间对A356铝合金的半固态浆料的影响。

It is found that the prepared A356 al alloy semi-solid rheological slurry by the complex method can meet the requirements of rheological casting.

24. 半固态加工是金属材料成形领域中的一种新工艺。本文分析了铝合金半固态成形技术的现状及发展趋向。

Semi-solid forming is one of new types of material processing. This paper analyses the present and the future of this new forming technology.

25. 半固态合金挤压工艺的关键是控制半固态合金坯料的流动和变形。

Controlling deformation and flow of semisolid alloy slurry is the key of die casting of semisolid alloy.

26. 介绍了镁合金半固态触变成形技术中的三个关键技术:非枝晶组织半固态浆料的制备、坯料的二次加热、半固态触变压铸成形。

This paper introduced the key technology of SSP(semi-soild process) thixomolding of magnesium alloys : the preparation of non-dendritic structure, reheating, thixomolding.

27. 介绍了镁合金半固态触变成形技术中的三个关键技术:非枝晶组织半固态浆料的制备、坯料的二次加热、半固态触变压铸成形。

This paper introduced the key technology of SSP(semi-soild process) thixomolding of magnesium alloys : the preparation of non-dendritic structure, reheating, thixomolding.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!