工时率用英语怎么说,工时率的英文翻译


词语导航

基本信息

词语:工时率

繁体:工時率

拼音:gōng shí shuài

英语翻译

【经】 man-hour rate

分词翻译

工时的英语翻译:

man-hour
【化】 man hour
【经】 man-hour

率的英语翻译:

frank; hasty; lead; modulus; quotiety; rash; rate; ratio; usually
【医】 rate
【经】 rater.

翻译例句

1. 分析工时率、工时成本、效率及工厂制造贡献。

Analyses Labour rate, Labour cost, efficiency and MFG. Contribution.

2. 引入浮动工时率的概念,提出了结合浮动工时率和网络计划工序拓扑排序的一种新的编码解码方法。

The concept of float rate was introduced. Integrating float rate with the toposorting of activities in network scheduling, a new method of coding and decoding was presented.

3. 如果用每百万工时报告的工伤数字做比较,壳牌公司的整体安全记录略好于英国石油公司。但是多年来,壳牌公司的死亡率总是高于同业公司。

Shell"s overall safety performance, as measured by reported injuries per million work hours, was slightly better than BP"s, but it has for years suffered a higher fatality rate than its peers.

4. 如果(生产率上升)只是外包和裁员的结果,那么无论如何,在面对增长的需求,生产者雇佣更多员工时,生产率又会下降。

If it"s just the result of layoffs and outsourcing, however, it will fall when, faced with increased demand, producers do more hiring.

5. 去年,美国的GDP下降了约2.5%,而工时缩减了5.1%,因此劳动生产率(每小时所创造的GDP)提高了2.5%。

America"s economy shrank by around 2.5% last year but hours worked fell at twice that rate, so productivity (GDP per hour) rose by 2.5%.

6. 通过采用小压缩率多道次拉拔工艺,减少锌-铁合金的厚度,积极采用人工时效工艺等解决了拉拔困难的问题。

The drawing difficulty is settled by adopting small draught and multi-pass drawing process, reducing the thickness of Zn-Fe alloy and using artificial aging process actively.

7. 省时、高效,并且减轻劳动强度,基本可以节省工时一半,提高劳动生产率三倍,是外墙施工的最理想设备。

Time-saving, highly effective, and reduces the labor intensity, basic may save man-hour of half, enhances labor productivity three times, is the outer wall construction most ideal equipment.

8. 柏林——德国的失业率8月份微幅上升,达8.3%,但是得到了控制,因为雇主利用削短工时而不是解雇员工来应对这个问题。

BERLIN - Germany"s unemployment rate edged up to 8.3 percent in August, but was kept in check by employers" use of shorter work hours instead of layoffs.

9. 近一个世纪来,每周工时一减再减,而每小时劳动生产率则提高了20倍。

In nearly a century, the weekly working hours and less per hour, and the labor productivity is raised 20 times.www.WENtiyI.COm

10. 汽车回收计划和工人缩短工时已帮助德国失业率保持平稳。

The car scrappage scheme and workers being put on fewer hours have helped keep German jobless levels steady.

11. 麦肯锡还认为,假使因性别差异而造成的参与率、工时差异、生产力都能弥平,那么全球经济的富裕程度将增加28.4万亿美元(或26%)。

If the gender gaps in participation, hours worked and productivity were all bridged, the world economy would be $28.4 trillion (or 26%) richer, McKinsey reckons.

12. 本文的研究结果表明,双端面磨削可以在很短的加工时间内获得极高的表面光洁度、高的精度和高的磨除率。

Preliminary results presented in this report showed that double side grinding produces very good surface finish, a high precision, and high material, removal rates, in short processing.

13. 在作业加工时间简单线性恶化下,提出作业的非负开始和停止延迟恶化率,构造了满足约束条件的复合作业。

Under the simple linear deteriorating, nonnegative start and stop lag deteriorating rates are introduced so as to combine jobs and construct composite jobs satisfying precedence relations.

14. 同时根据抽查结果确定A企业用于建立工时标准的宽放率。

The sampling results can help firm A to establish the time ration.

15. 并对用不同电规准加工时的电极损耗机理和生产率(加工速度)作出了分析和探讨,得出了相应的结论。

Mechanism of electrode loss and machining rate are analyzed when different electrical parameters are used and then corresponding conclusion is obtained.

16. 而EET组与对照组比较,其复工率、复工时间、恢复家务的时间和比率均比之多和早,二者之间差别有统计学意义。

About time and ratio of return to work and housework, the EET group was higher and earlier than no EET (N-EET) group.

17. 对焊接接头进行人工时效后,不同热输入条件下得到的焊接接头的强度和延伸率都有明显提高。

After aging treatment, the strength and elongation of welded joints under different parameters increased and their mechanical properties were similar.

18. 第一种情况是把每周标准工时从40小时缩减为30小时,而不改变小时工资率。

The first is a reduction in the standard working week from forty hours to thirty without any change in the hourly rate of pay.

19. 分两种情况:增长率与基本加工时间无关以及增长率与基本加工时间相关。

There are two situations: the basic processing times are independent of the increasing rates and the basic processing times are related to the increasing rates.

20. 结果在气味辨认率高、低两种情况下,自传体记忆提取加工时间均存在干扰效应。

The results showed that there"s interference effect in either a high or low rate of identification condition.

21. 假设每周工时从40小时减为30小时,而小时工资率不变。

We assume that the working week is cut from forty hours to thirty, with no change in hourly pay.

22. 通过TC4铣削加工时的铣削力试验,研究了干切削时和有氮气介质铣削时影响铣削力大小的几个因素,为提高金属去除率优化了切削参数。

Several factors affecting the cutting force of milling TC4 during dry cutting with nitrogen medium are studied. The cutting parameters are optimized to enhance metal removal rate.

23. 50年代以来,生产率的提高并没有转化成工时的减少。

Since the 1950s, productivity gains have not translated into fewer work hours.

24. 文章不仅证实了在累计平均不良率上存在着学习效应,还证实了累计平均工时也存在着学习效应,但是前者的进步率要远大于后者。

The article confirms learning curve exists not only in the average bad rate, but also in the average man-hour, but the former progress rate is much larger than the latter.

25. 本发明的木材透空雕刻工艺操作比较容易,加工时间明显缩短、成本降低、雕刻难度降低、损耗率小、成品率高。

The wood piercing carving process has easier process operation, obviously shortened processing time, reduced cost, lowered carving difficulty, low loss rate, and high yield.

26. 本发明中的板材产品性能稳定、 板材机械加工时不变形,加工成品率升高。

The plates product of the invention has steady properties, and the plates can not be deformed in machining, while the machining yield can be improved.

27. 本发明中的板材产品性能稳定、 板材机械加工时不变形,加工成品率升高。

The plates product of the invention has steady properties, and the plates can not be deformed in machining, while the machining yield can be improved.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!