共聚体用英语怎么说,共聚体的英文翻译


词语导航

基本信息

词语:共聚体

繁体:共聚體

拼音:gòng jù tǐ

英语翻译

【化】 interpolymer

分词翻译

共聚的英语翻译:

【化】 copolymerization
【医】 coyolymerization

体的英语翻译:

body; style; substance; system
【计】 body
【医】 body; corpora; corps; corpus; leukocytic crystals; scapus; shaft; soma
Somato-

翻译例句

1. 氢化丁晴橡胶(HNBR)丁二烯和丙烯晴的共聚体。

Hydrogenated nitrile rubber (HNBR) of butadiene and acrylonitrile copolymer.

2. 经乙酰化,膦化反应后的共聚体可以与二正丁胺作用制得膦酰胺树脂。

The copolymer after acetylation and phosphonylation can react with dibutyl amine to yield the corresponding dibutylamidophosphate resin.

3. 通过对共聚体物理结构的测定,讨论了影响共聚体物理结构的主要因素。

By measuring the porosity, surface area etc. of the copolymers, the main factors which affect the physical structure were discussed.

4. 本发明提供纤维素酯共聚体和氧化纤维素共聚体以及纤维素酯共聚体的方法。

This invention provides cellulose ester interpolymers, and methods of oxidizing cellulose interpolymers and cellulose ester interpolymers.

5. 采用DSC、TGA、IR及PGC等方法对AN-VDC共聚体纤维在空气中受热过程中发生的化学变化进行分析。

The chemical reactions which toke place while AN-VDC copolymer was heated in air were studied with the help of DSC, TGA, IR , PGC.

6. 基丁酸酯共聚物是作为均聚物PHB的降解率一般用途的首选是在其正常高熔体加工温度。

PHB copolymers are preferred for general purposes as the degradation rate of PHB homopolymer is high at its normal melt processing temperature.

7. 介绍了氰酸酯树脂与热塑性树脂、橡胶弹性体、热固性树脂及含有不饱和双键的化合物共混或共聚改性的研究现状。

In this paper, the properties modification of cyanate resin by blending or co-polymerization with thermoplastic, rubber, thermoset resins and olefinically unsaturated compounds is introduced.

8. 以苯基环体、二甲基环硅氧烷为原料,在催化剂存在下,经开环共聚、降解、脱除低沸物,制得低苯基含量的二苯基硅橡胶。

Dimethyldiphenyl RTV silicone rubber with low phenyl contents was synthesized by ring opening copolymerization of phenyl cyclic siloxane with DMC.

9. 醋酸乙烯酯共聚物用途广泛,可用炸弹性体、薄膜、泡沫、涂料、热熔胶、水性粘合剂、纺织上浆剂、织物涂层等。

The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.

10. 聚醚醋嵌段共聚弹性体纤维(简称PEET)是针织工业用的新型化纤原料。

Polyether ester block copolymerized elastomer fibre (PEET) is a new type of man-made fibre for knitting industry.

11. 结果表明,当聚苯乙烯大单体的投料质量分数在40%左右时,此接枝共聚物是一种性能良好的热塑性弹性体。wWW.WenTIYi.Com

The graft copolymer was a kind of thermoplastic elastomer with good mechanical properties when mass fraction of polystyrene macromer was about 40%.

12. 采用热引发熔融接技方法研究了不同反应条件下马来酸酐(MAH)接枝hdpe、接枝共聚pp及接技EPDM弹性体的接枝反应。

The graft reaction of MAH grafted HDPE, PP and EPDM at various conditions is studied by means of polyolefin grafted MAH in melt via heat initiation.

13. 在一定的组成范围内,共聚酯熔体有很好的液晶性。

The melted copolyesters exhibit good liquid crystallinity in some range of the copolyester compositions.

14. 本文探索合成出一种新型的共聚醚聚氨酯热塑弹性体材料。

In the present paper, a new type of copolyetherpolyurethane thermoplastic elastomer was synthesized and charactererized.

15. 研究了以EVA共聚物为基础,采用等离子体和高能电子束辐照接枝丙烯酸类单体样品的阻燃性能。

An attempt has been made in the paper aiming at imparting flame retardancy to EVA copolymer by grafting acrylic monomers induced by plasma and electron-beam preirradiation.

16. 采用两步法工艺路线,以PA6齐聚物、聚醚和少量交联剂为原料共聚合成聚醚酰胺热塑性弹性体(TPAE)。

Polyether amide thermoplastic elastomer (TPAE) was synthesized via two-step process by using PA6 oligomer and PEG as primary material and a fixed amount of crosslinking agent.

17. 采用两步法工艺路线,以PA6齐聚物、聚醚和少量交联剂为原料共聚合成聚醚酰胺热塑性弹性体(TPAE)。

Polyether amide thermoplastic elastomer( TPAE) was synthesized via two-step process by using PA6 oligomer and PEG as primary material and a fixed amount of crosslinking agent.

18. 证实了弹性体的微观结构,推导了共聚物的裂解机理。

The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.

19. 线形-树状体杂化嵌段共聚物是由树枝状高分子嵌段(d)与线形高分子链(L)通过化学键连接而成的一类特殊拓扑结构的共聚物。

Linear-dendritic hybrid copolymers are a special type of copolymers composed of both dendritic (d) and linear polymer blocks (l) which are linked together by covalent bonds.

20. 采用红外吸收光谱图和透射电镜表征了醇酸树脂、有机硅预聚体以及醇酸-有机硅嵌段共聚物。

The alkyd resin, silicone prepolymer and alkyd-silicone block copolymer were characterized bv use of iR and SEM.

21. 使用丙烯酸酯共聚物(acr)作为氯化聚氯乙烯(cpvc)的改性剂,使用超微细石墨粉体做填料,制备了具有导热性能的共混材料。

Thermal conductivity material was prepared with acrylate copolymer (acr) used as modifier for chlorinated PVC (CPVC) and superfine powdered graphite used as filler.

22. 利用模拟退火方法研究非对称半结晶两嵌段共聚物熔体分别在弱分离和强分离条件下的结晶过程。

A simulated annealing method is used to study the micro phase separation and crystallization in cylinder-forming semicrystalline diblock copolymers.

23. 以间苯二酚-糠醛低聚物为炭前驱体,三嵌段共聚物F127为结构导向剂,通过悬浮辅助的蒸发诱导自组装乳化成球,高温炭化后得到有序中孔炭球。

Ordered mesoporous carbon spheres(OMCs) were synthesized by suspension-assist evaporation-induced self-assembly of resorcinol-furfural oligomers and triblock copolymer F127.

24. 用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。

The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.

25. 以小本体聚丙烯(PP)为基料,通过与共聚pp、聚烯烃弹性体(POE)及其它助剂共混改性,制得汽车保险杠专用料。

Study on special compound for automobile bumper was made by means of blending. Small bulk PP was modified with co-polypropylene, poly (octene-ethylene) (POE) and other additives.

26. 聚烯烃热塑性弹性体(TPO-101)是以乙烯与辛烯共聚物同聚烯烃树脂经反应共混而成的热塑性弹性体。

Polyolefin thermoplastic elastomer (TPO-101) based on ethylene and octene copolymer with polyolefin resin formed by the reactive blending of thermoplastic elastomer.

27. 异丁烯和不大于3%的异戊二烯催化共聚所生成的合成弹性体。

A synthetic elastomer produced by catalytic copolymerization of isobutene with no more than 3% of isoprene;

28. 结果表明,合成的共聚物具有良好的乳化性及吸水性,并在一定组成下呈现热塑性弹性体的性质。

The results showed that the terpolymers possessed good emulsifying property and water absorbency , and behaved as thermoplastic elastomers according to their composition.

29. 结果表明,合成的共聚物具有良好的乳化性及吸水性,并在一定组成下呈现热塑性弹性体的性质。

The results showed that the terpolymers possessed good emulsifying property and water absorbency , and behaved as thermoplastic elastomers according to their composition.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!