
词语导航
基本信息
词语:泵转子
繁体:泵轉子
拼音:bèng zhuǎn zǐ
英语翻译
【化】 pump rotor
分词翻译
泵的英语翻译:
pump
【化】 pump
【医】 pump
转子的英语翻译:
rotor
【计】 GOSUB
【医】 trochanter
翻译例句
1. 罗茨泵转子型线是罗茨泵的关键。
The Rotor profile is the key for Roots pump.
2. 两个泵转子通过旋转的抽油杆实现驱动。
Two pump rotor spinning rod through the implementation drive.
3. 利用计算机辅助设计罗茨真空泵转子型线。
By the use of the computer auxilliary design, the rotor"s cycloids of Roots (Rhodes) vacuum pumps are designed.
4. 主要产品有:叶片泵转子、定子、叶片及其它零件。
The main products are: rotor blades, the stator, leaves and other parts.
5. 然后应用能量守恒定律去求得螺杆泵转子的设计规律。
Then, find out the design rules with the conservation law of energy.
6. 当设计螺杆泵转子的齿形时,需要计算它们的液压扭矩。
It is necessary to compute the screw hydrostatic torque in designing the teeth profiles of screw pumps.
7. 本文介绍一种计算机辅助设计的新的系列化罗茨泵转子型线。
This paper introduces a new series of rotor form line of CAD system.
8. 泵转子具有较小的绕度,运行平稳、振动小、噪音低、使用寿命长。
Pump rotor is provided with low windability to achieve smooth operation, little vibration, low noise and long service life.
9. 其目的是为了设计一种提高转子槽加工精度的叶片泵转子槽加工工艺。
The aim of the invention is to design a process for processing the rotor slot of the vane pump, so as to improve the processing accuracy of the rotor slot.
10. 本文对渐开线型线罗茨泵转子的理论型线、实际型线公式做了新的推导。
In this paper, a new deduction on the theoretical linear formula and the practical one of the involute, linear roots pump motor was made.
11. 多级离心泵转子的干临界转速与湿临界转速差别较大,计算值与试验值基本一致。
The "dry" and "wet" critical speeds of multistage centrifugal pump rotor are quite different. The calculated and measured critical speeds are in good agreement.
12. 随着泵转子的连续旋转,以上吸气和排气过程循环进行,实现了泵的连续抽气目的。
As the pump rotor continuous rotation, the above cycle of suction and exhaust process and the achievement of the purpose of the pump continuous extraction.
13. 因此对双螺杆泵转子型线设计及加工技术研究具有重要的理论意义和工程实用价值。
Therefore, research the profile design and processing technology of twin-screw rotor has important theoretical significance and practical value.
14. 本发明涉及子母叶片泵关键零件转子的加工技术,特别一种叶片泵转子槽加工工艺。
The invention relates to a technology for processing a rotor which is a key part of a composite vane pump, in particular to a process for processing a rotor slot of a vane pump.
15. 齿轮泵转子的齿廓型线一般为渐开线,渐开线型线虽设计加工方便,但存在原理性的困油现象;
The tooth profile of gear pump is involute in general. Though the involute profile is easy to design and manufacture, it also brings the inherent problem of oil trapping.
16. 它采用对称的转子形状结构,有效地提高了真空泵转子的动平衡性能,有效降低了泵的运转噪声。
By using a symmetric structure for the rotor shape, the utility model effectively improves dynamic balance capability of the rotor of the vacuum pump and decreases rotating noise of the pump.
17. 分析了聚乙烯装置中KNT - 30型齿轮泵转子的失效原因,介绍了齿轮泵转子的国产化制造过程。
The failure reasons of KNT-30 type Gear-pump"s rotors in HDPE plant are analyzed. Wholly local manufacture of the rotors is introduced.
18. 得出了液体动静压滑动轴承可用于液体火箭发动机涡轮泵转子支撑的结论,同时提出了待解决的关键技术。
Comes to the conclusion that the hybrid bearing can be used to the liquid rocket engine turbopump, and then puts forward the key technique to be solved.
19. 由于转速过高,使高粘度泵在运转时内部转子几乎只是形成了空转,围绕所输送介质打滑,造成吸不上料,或者是流量很小。
Due to high speed, high viscosity pump inside the rotor is barely formed when running idle, surrounding medium by sliding, cause not feeding, or flow rate is small.
20. 摆线齿形的内啮合齿轮泵又叫做摆线转子泵,泵中的小齿轮和内齿轮只相关一个齿,因此这种内啮合齿轮泵不需要设置隔板。
Cycloidal tooth profile of the internal gear pump, also called cycloidal rotor pump, pump the small gear and internal gear only related a tooth, so the internal gear pump do not need to set partition.
21. 电机转子安装在人工心脏泵的叶轮上,并因电磁轴承的作用而悬浮。
The rotor of the PMSM is fixed to the pump impeller of the artificial heart, and is levitated by a magnetic bearing.
22. 冷却液的流量通常为泵设计流量的2% - 3%,内磁转子与隔离套之间的环隙区域由于涡流而产生高热量。
The flow of coolant pump design flow is usually 2% -3%, within a set of magnetic separation between the rotor and the annulus region due to eddy current arising from high-calorie.
23. 内啮合齿轮泵的结构和其他齿轮泵结构类似,主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。
Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.
24. 平衡盘的平衡状态是动态的,泵的转子在某一平衡位置会前后作轴向脉动。
Balance of the balance disk is dynamic, the pump rotor in a balanced position for the axial pulse before and after.
25. 它可以保存四组转子泵的工作特性参数,可以在线进行参数转换,调节和选择。
It can save four sets of characteristics of the rotor pump parameters, parameter online conversion, regulation and choice.
26. 旋转血泵磁浮轴承的定子和转子之间没有机械接触,所以其内部不会发生机械磨损或产生血栓。Www.wENtIYI.coM
Magnetic bearing has no mechanical contact between the rotor and stator, and a rotary pump with magnetic bearing has therefore no mechanical wear and thrombosis.
27. 旋转血泵磁浮轴承的定子和转子之间没有机械接触,所以其内部不会发生机械磨损或产生血栓。
Magnetic bearing has no mechanical contact between the rotor and stator, and a rotary pump with magnetic bearing has therefore no mechanical wear and thrombosis.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
