
词语导航
基本信息
词语:子程序功能
繁体:子程序功能
拼音:zǐ chéng xù gōng néng
英语翻译
【计】 subroutine function
分词翻译
子程序的英语翻译:
subprogram; subroutine
【计】 functional element program; subprograme; subroutine
【经】 sub-program; sub-routine
功能的英语翻译:
function
【计】 F; FUNC; function
【医】 function
【经】 functions
翻译例句
1. 对于词汇命名的子程序,可以显式地启用这个功能,但需要显式地关闭与之相关的警告。
For lexical named subroutines, you have explicitly enable the feature but you then have to explicitly turn off its warnings.
2. 并采用监控程序、I2C总线模拟通用子程序等软件实现测控功能和数字平滑滤波。
And universal subprogram was simulated by monitor routine and I2C bus to realize control function and digital smooth filtering.
3. 指出利用数控系统的子程序和参数编程功能可以完成一些特殊零件的加工。
This paper points out that the functions of subroutines and parametric programming of the nc system can complete machining of some special parts.
4. 分析了系统软件的功能,采用模块化软件设计方法,设计了控制系统主程序、中断服务程序以及子程序。
After analysis the function of system software, main program, interrupt service program and subroutine were designed use modeling develop ways.
5. 对Marc软件功能进行了二次开发,研编了在钻孔中考虑土体初始应力的子程序。
And the MARC program"s function has been secondarily developed, with subroutines for soil initial stress analysis.
6. 主程序实现文档读入与测试结构信息识别、分类、存储功能,控制三个子程序实现单类测试结构版图文件生成。
The main program implements files inputting and the identifying, classifying and storing functions, controls the three subroutines to generate layout files of some special type.
7. 该子程序的开发扩展了数控系统的编程功能。www.WENtIyI.cOM
The development of the sub-program has expanded the programming function of CNC system.
8. 采用程序设计语言编写了绘图基本子程序,并把具有不同功能的子程序组合成一个绘图基本软件。
A basic subroutine for drawing is compiled with programming language, and some of subroutines with different functions are composed to form a drawing basic software.
9. 在SIEMENS数控系统功能的基础上,开发出了摆线凸轮加工子程序,该子程序使用等误差直线逼近来保证凸轮的精度。
On the basis of the functions of SIEMENS CNC system, the sub-program for cycloidal cam machining has been developed.
10. 该系统在几个6502汇编语言子程序的支持下,具有快速、灵活、多功能的特点。
This system is supported by several subroutines in 6502 assembly language, which is of high-speed, flexibility, multi-functions.
11. 系统具有间隙补偿,子程序调用,图形显示,现场修改工艺参数等标准数控功能。
The CNC system used on the machine enables backlash compensation, subroutine call, graphic display, on-the spot change of machining data and the like standard CNC functions.
12. 按功能模块说明了以TMS320F 240为其核心的硬件电路,给出了限流软起动方式的主程序流程以及各个子程序流程。
The function modules of the system with TMS320F240 as its central unit are illuminated. The flowcharts of the program and the subprograms by means of current limit starting are all given.
13. 软件部分由针对不同模块所要实现不同功能而设计的多个子程序而构成。
The part of the software realized with the different function to different module.
14. 任何一个组织都可以获得全功能的电子程序控制,用户只需把的柜锁里面的机械柱体换成计算机锁具电子柱体即可。
Any organization can gain full-featured electronic access control by replacing the mechanical cy-l-in-ders inside their existing locks with the CyberLock electronic cylinders.
15. 任何一个组织都可以获得全功能的电子程序控制,用户只需把的柜锁里面的机械柱体换成计算机锁具电子柱体即可。
Any organization can gain full-featured electronic access control by replacing the mechanical cy-l-in-ders inside their existing locks with the CyberLock electronic cylinders.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
