阀壳用英语怎么说,阀壳的英文翻译


词语导航

基本信息

词语:阀壳

繁体:閥殼

拼音:fá ké

英语翻译

【机】 valve box; valve casing

分词翻译

阀的英语翻译:

clique; valve
【化】 valve
【医】 limen; limina; valve

壳的英语翻译:

carapace; hull; rind; shell; shuck
【化】 cover
【医】 crust; crusta; crustae; putamen; shell; testa

翻译例句

1. 偏心压把(3)通过销子(4)铆接在阀壳(5)上。

The eccentric press handle (3) is riveted and connected to the valve casing (5) through a pin (4).wwW.weNTiYi.coM

2. 通过局部改进设计和优化,使阀壳强度符合设计要求。

With the design optimization of the valve structure, the valve strength is improved and satisfied.

3. 试验得到的主汽阀阀壳应力值将为计算和结构改型提供一定依据。

The measured thermal stress values will provide the theoretical base for calculation and modification of the structure.

4. 水暖控制阀由阀壳、阀外盖、内盖、压簧、阀芯、定位装置及密封圈构成。

The water heating control valve is composed of a valve casing, a valve outer cover, an inner cover, a pressure spring, a valve core, a positioning device and a sealing ring.

5. 提出了汽轮机主汽阀和调节阀阀壳低周疲劳寿命和蠕变寿命的定量设计方法,并给出了应用实例。

The paper also presents the low cycle fatigue life and creep life"s quantificational method of steam turbine"s main stop valve and control valve, and applied examples.

6. 中性介质,也宜选用铜合金为阀壳材料的电磁阀,否则,阀壳中常有锈屑脱落,尤其是动作不频繁的场合。

Neutral medium, it should be chosen for the copper alloy shell material valve solenoid valve, or valve shells falling debris often rust, especially the movements do not frequent occasions.

7. 介绍了汽轮机转子、主蒸汽管道、汽缸和阀壳稳态蠕变应力和非稳态蠕变应力的计算方法,采用大型有限元分析计算程序计算汽轮机部件的非稳态蠕变应力和稳态蠕变应力。

The method takes into consideration both for steady and unsteady creep stresses of rotors, pipes, casings and valve housings to be determined with the help of finite element analysis programs.

8. 大多半厚(粘稠)的机油在启动时实际上通过旁支泄压阀又流回到油底壳而不能进入策动机油道。

Most of the thick oil at startup actually goes through the bypass valve back to the engine oil sump and not into your engine oil ways.

9. 安全壳喷淋系统内有两台喷淋泵,喷嘴,喷淋添加箱,许多安全壳隔离阀和相关的管道仪表等。

The containment spray system consists of two pumps, spray ring headers, a spray additive tank, a number of motor operated isolation valves and all necessary piping, instruments etc.

10. 模型由压缩机、壳管式冷凝器、膨胀阀以及满液式蒸发器等一系列部件模型组成。

The model consists of component models including the compressor, shell and tube condenser, expansion valve and flooded evaporator.

11. 模型由一系列部件模型组成,包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器。

The model includes sub models for key components, such as non economized compressor, economized compressor, economizer, expansion valve, shell and tube condenser, and flooded evaporator.

12. 为了能承受一定的外部压力并很好地实现密封,设计并采用粘性介质压力成形工艺制造了不锈钢球壳阀芯。

In order to endure certain external pressure and seal well, the stainless steel spherical shell is designed and manufactured.

13. 为了能承受一定的外部压力并很好地实现密封,设计并采用粘性介质压力成形工艺制造了不锈钢球壳阀芯。

In order to endure certain external pressure and seal well, the stainless steel spherical shell is designed and manufactured.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!